imx233: fix recording gain

For some reason, there was a mismatch between the setting (decibel) and the
audiohw code (centicel). This resulted in a gain divided by 10. This may
explain why some people experienced low volume with the mic on the fuze+.

Change-Id: I138ac18dd93c36f43a7dfce735efc826405c598c

2 files changed, 4 insertions, 4 deletions

diff --git a/firmware/drivers/audio/imx233-codec.c b/firmware/drivers/audio/imx233-codec.c
index b2dcaa3d23..357aa33bb5 100644
--- a/firmware/drivers/audio/imx233-codec.c
+++ b/firmware/drivers/audio/imx233-codec.c
@@ -49,6 +49,7 @@ void audiohw_close(void)
 /* volume in centibels */
 void audiohw_set_volume(int vol_l, int vol_r)
 {
+    /* convert to half-dB */
     imx233_audioout_set_hp_vol(vol_l / 5, vol_r / 5);
 }
 
@@ -72,11 +73,11 @@ void audiohw_disable_recording(void)
     imx233_audioin_close();
 }
 
-/* volume in centibels */
+/* volume in decibels */
 void audiohw_set_recvol(int left, int right, int type)
 {
-    left /= 5;
-    right /= 5;
+    left *= 2; /* convert to half-dB */
+    right *= 2;
     if(type == AUDIO_GAIN_LINEIN)
     {
         imx233_audioin_set_vol(false, left, AUDIOIN_SELECT_LINE1);
diff --git a/firmware/target/arm/imx233/audioout-imx233.c b/firmware/target/arm/imx233/audioout-imx233.c
index 6ebeb8a469..6c2c579536 100644
--- a/firmware/target/arm/imx233/audioout-imx233.c
+++ b/firmware/target/arm/imx233/audioout-imx233.c
@@ -54,7 +54,6 @@ static int hp_unmute_cb(struct timeout *tmo)
 
 void imx233_audioout_preinit(void)
 {
-
     /* Enable AUDIOOUT block */
     imx233_reset_block(&HW_AUDIOOUT_CTRL);
     /* Enable digital filter clock */