Add Sansa Clip+ target to test mkamsboot

UNTESTED, could ver well brick your Clip+
If it works, booting should just be delayed by a small delay (perhaps
not noticeable)
Hopefully the Clipv2 checks will work for Clip+ and then we'll be able
to test the other Clipv2 code (LCD/button)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24219 a1c6a512-1295-4272-9138-f99709370657

9 files changed, 78 insertions, 16 deletions

diff --git a/rbutil/mkamsboot/README b/rbutil/mkamsboot/README
index 53f1fba9b9..a9eba35d21 100644
--- a/rbutil/mkamsboot/README
+++ b/rbutil/mkamsboot/README
@@ -23,6 +23,7 @@ Supported models
 ----------------
 
 Sansa Clip  :   firmware version starting with "01."
+Sansa Clip+ :   firmware version starting with "01."
 Sansa Clipv2:   firmware version starting with "02."
 Sansa Fuze  :   firmware version starting with "01."
 Sansa E200v2:   firmware version starting with "03."
@@ -37,6 +38,7 @@ For the firmware upgrade to happen, the firmware has to be named specially:
 
 clip v2 :   m30pa.bin
 clip    :   m300a.bin
+clip+   :   clppa.bin
 fuze    :   fuzea.bin
 e200v2  :   e200pa.bin
 c200v2  :   c200pa.bin
diff --git a/rbutil/mkamsboot/dualboot.c b/rbutil/mkamsboot/dualboot.c
index 2eda3930cd..01a3083f58 100644
--- a/rbutil/mkamsboot/dualboot.c
+++ b/rbutil/mkamsboot/dualboot.c
@@ -116,3 +116,17 @@ unsigned char dualboot_clipv2[272] = {
     0x01, 0x00, 0x83, 0xe2, 0x00, 0x20, 0xa0, 0xe3, 0x15, 0xff, 0x2f, 0xe1, 0x38, 0x00, 0x00, 0x00,
     0xff, 0xff, 0x0f, 0x00, 0x14, 0x00, 0x0f, 0xc8, 0x00, 0x00, 0x0b, 0xc8, 0x00, 0x00, 0x0e, 0xc8
 };
+unsigned char dualboot_clipplus[188] = {
+    0xa8, 0xf0, 0x9f, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x1f, 0xe5, 0x20, 0x10, 0x1f, 0xe5,
+    0x01, 0x20, 0x40, 0xe0, 0x68, 0x30, 0x9f, 0xe5, 0x01, 0x40, 0x50, 0xe4, 0x01, 0x40, 0x43, 0xe4,
+    0x00, 0x00, 0x52, 0xe1, 0xfb, 0xff, 0xff, 0x1a, 0x02, 0x50, 0x83, 0xe2, 0x54, 0x00, 0x9f, 0xe5,
+    0x00, 0x10, 0x90, 0xe5, 0x01, 0x18, 0x81, 0xe3, 0x00, 0x10, 0x80, 0xe5, 0x05, 0x06, 0xa0, 0xe3,
+    0x01, 0x00, 0x50, 0xe2, 0xfd, 0xff, 0xff, 0x1a, 0x02, 0x00, 0x00, 0xea, 0x54, 0x00, 0x1f, 0xe5,
+    0x54, 0x10, 0x1f, 0xe5, 0x01, 0x00, 0x00, 0xea, 0x68, 0x00, 0x1f, 0xe5, 0x68, 0x10, 0x1f, 0xe5,
+    0x01, 0x40, 0x43, 0xe0, 0x01, 0x20, 0x50, 0xe4, 0x01, 0x20, 0x43, 0xe4, 0x04, 0x00, 0x53, 0xe1,
+    0xfb, 0xff, 0xff, 0x1a, 0x01, 0x00, 0x83, 0xe2, 0x00, 0x20, 0xa0, 0xe3, 0x15, 0xff, 0x2f, 0xe1,
+    0x38, 0x00, 0x00, 0x00, 0xff, 0xff, 0x0f, 0x00, 0x14, 0x00, 0x0f, 0xc8
+};
diff --git a/rbutil/mkamsboot/dualboot.h b/rbutil/mkamsboot/dualboot.h
index b88a18240f..f3f1fc7654 100644
--- a/rbutil/mkamsboot/dualboot.h
+++ b/rbutil/mkamsboot/dualboot.h
@@ -7,3 +7,4 @@ extern unsigned char dualboot_c200v2[228];
 extern unsigned char dualboot_m200v4[204];
 extern unsigned char dualboot_fuze[228];
 extern unsigned char dualboot_clipv2[272];
+extern unsigned char dualboot_clipplus[188];
diff --git a/rbutil/mkamsboot/dualboot/Makefile b/rbutil/mkamsboot/dualboot/Makefile
index 06b90c7fb9..94ec718574 100644
--- a/rbutil/mkamsboot/dualboot/Makefile
+++ b/rbutil/mkamsboot/dualboot/Makefile
@@ -4,8 +4,8 @@ CC=gcc
 # adding a new target.  mkamsboot.c also needs to be edited to refer to these
 # new images.
 
-BOOTOBJS = nrv2e_d8.o dualboot_clip.o dualboot_e200v2.o dualboot_c200v2.o dualboot_m200v4.o dualboot_fuze.o dualboot_clipv2.o
-BOOTBINS = nrv2e_d8.arm-bin dualboot_clip.arm-bin dualboot_e200v2.arm-bin dualboot_c200v2.arm-bin dualboot_m200v4.arm-bin dualboot_fuze.arm-bin dualboot_clipv2.arm-bin
+BOOTOBJS = nrv2e_d8.o dualboot_clip.o dualboot_e200v2.o dualboot_c200v2.o dualboot_m200v4.o dualboot_fuze.o dualboot_clipv2.o dualboot_clipplus.o
+BOOTBINS = nrv2e_d8.arm-bin dualboot_clip.arm-bin dualboot_e200v2.arm-bin dualboot_c200v2.arm-bin dualboot_m200v4.arm-bin dualboot_fuze.arm-bin dualboot_clipv2.arm-bin dualboot_clipplus.arm-bin
 
 all: dualboot.h
 
@@ -31,6 +31,9 @@ dualboot_c200v2.o: dualboot.S
 dualboot_clipv2.o: dualboot.S
         arm-elf-gcc -DSANSA_CLIPV2 -c -o dualboot_clipv2.o dualboot.S
 
+dualboot_clipplus.o: dualboot.S
+        arm-elf-gcc -DSANSA_CLIPPLUS -c -o dualboot_clipplus.o dualboot.S
+
 # Rules for the ucl unpack function
 nrv2e_d8.o: nrv2e_d8.S
         arm-elf-gcc -DPURE_THUMB -c -o nrv2e_d8.o nrv2e_d8.S
diff --git a/rbutil/mkamsboot/dualboot/dualboot.S b/rbutil/mkamsboot/dualboot/dualboot.S
index 5210ba5160..fe1a64befb 100644
--- a/rbutil/mkamsboot/dualboot/dualboot.S
+++ b/rbutil/mkamsboot/dualboot/dualboot.S
@@ -21,7 +21,7 @@
 
 .text
 
- #if defined(SANSA_CLIPV2)
+#if defined(SANSA_CLIPV2) || defined(SANSA_CLIPPLUS)
 .set RAM_SIZE, 0x100000 /* Use 1MB of SDRAM on v2 firmwares (bigger firmware) */
 #else
 .set RAM_SIZE, 0x50000  /* Use full IRAM on v1 firmwares */
@@ -156,6 +156,12 @@ uclcopy:
 
         cmp     r1, #0             /* C3 = #0 means button pressed */
         beq     boot_of
+#elif defined(SANSA_CLIPPLUS)
+        /* TODO */
+        mov     r0, #0x500000       /* Approximately 5 seconds */
+1:      subs    r0, r0, #1          /* just to prove we are running */
+        bne     1b
+        b       boot_of             /* branch to OF */
 #elif defined(SANSA_C200V2)
         /* check for RIGHT on C6, should changed to LEFT as soon as it
          * known in which pin that is in order for consistency  */
diff --git a/rbutil/mkamsboot/mkamsboot.c b/rbutil/mkamsboot/mkamsboot.c
index 8d40a1966c..d983d37853 100644
--- a/rbutil/mkamsboot/mkamsboot.c
+++ b/rbutil/mkamsboot/mkamsboot.c
@@ -109,7 +109,7 @@ execution to the uncompressed firmware.
 #define O_BINARY 0
 #endif
 
-/* 4 for m200, 2 for e200/c200, 1 or 2 for fuze/clop */
+/* 4 for m200, 2 for e200/c200, 1 or 2 for fuze/clip, 1 for clip+ */
 const unsigned short hw_revisions[] = {
     [MODEL_FUZE]    = 1,
     [MODEL_CLIP]    = 1,
@@ -117,9 +117,10 @@ const unsigned short hw_revisions[] = {
     [MODEL_E200V2]  = 2,
     [MODEL_M200V4]  = 4,
     [MODEL_C200V2]  = 2,
+    [MODEL_CLIPPLUS]= 1,
 };
 
-/* version 2 is used in Clipv2 and Fuzev2 firmwares */
+/* version 2 is used in Clipv2, Clip+ and Fuzev2 firmwares */
 const unsigned short fw_revisions[] = {
     [MODEL_FUZE]    = 1,
     [MODEL_CLIP]    = 1,
@@ -127,6 +128,7 @@ const unsigned short fw_revisions[] = {
     [MODEL_E200V2]  = 1,
     [MODEL_M200V4]  = 1,
     [MODEL_C200V2]  = 1,
+    [MODEL_CLIPPLUS]= 2,
 };
 
 /* Descriptive name of these models */
@@ -134,6 +136,7 @@ const char* model_names[] = {
     [MODEL_FUZE]    = "Fuze",
     [MODEL_CLIP]    = "Clip",
     [MODEL_CLIPV2]  = "Clip",
+    [MODEL_CLIPPLUS]= "Clip+",
     [MODEL_E200V2]  = "e200",
     [MODEL_M200V4]  = "m200",
     [MODEL_C200V2]  = "c200",
@@ -147,6 +150,7 @@ static const unsigned char* bootloaders[] = {
     [MODEL_E200V2]  = dualboot_e200v2,
     [MODEL_M200V4]  = dualboot_m200v4,
     [MODEL_C200V2]  = dualboot_c200v2,
+    [MODEL_CLIPPLUS]= dualboot_clipplus,
 };
 
 /* Size of dualboot functions for these models */
@@ -157,6 +161,7 @@ const int bootloader_sizes[] = {
     [MODEL_E200V2]  = sizeof(dualboot_e200v2),
     [MODEL_M200V4]  = sizeof(dualboot_m200v4),
     [MODEL_C200V2]  = sizeof(dualboot_c200v2),
+    [MODEL_CLIPPLUS]= sizeof(dualboot_clipplus),
 };
 
 /* Model names used in the Rockbox header in ".sansa" files - these match the
@@ -168,6 +173,7 @@ static const char* rb_model_names[] = {
     [MODEL_E200V2]  = "e2v2",
     [MODEL_M200V4]  = "m2v4",
     [MODEL_C200V2]  = "c2v2",
+    [MODEL_CLIPPLUS]= "cli+",
 };
 
 /* Model numbers used to initialise the checksum in the Rockbox header in
@@ -178,7 +184,8 @@ static const int rb_model_num[] = {
     [MODEL_CLIPV2]  = 60,
     [MODEL_E200V2]  = 41,
     [MODEL_M200V4]  = 42,
-    [MODEL_C200V2]  = 44
+    [MODEL_C200V2]  = 44,
+    [MODEL_CLIPPLUS]= 66,
 };
 
 /* Checksums of unmodified original firmwares - for safety, and device
@@ -212,7 +219,11 @@ static struct md5sums sansasums[] = {
     { MODEL_CLIP,   "1.01.32", "d835d12342500732ffb9c4ee54abec15" },
 
     { MODEL_CLIPV2, "2.01.16", "c57fb3fcbe07c2c9b360f060938f80cb" },
-    { MODEL_CLIPV2, "2.01.32", "0ad3723e52022509089d938d0fbbf8c5" }
+    { MODEL_CLIPV2, "2.01.32", "0ad3723e52022509089d938d0fbbf8c5" },
+
+#if 0 /* uncomment when Clip+ support is tested */
+    { MODEL_CLIPPLUS, "01.02.09", "656d38114774c2001dc18e6726df3c5d" },
+#endif
 };
 
 #define NUM_MD5S (sizeof(sansasums)/sizeof(sansasums[0]))
@@ -293,6 +304,8 @@ static int get_model(int model_id)
             return MODEL_M200V4;
         case 0x27:
             return MODEL_CLIPV2;
+        case 0x28:
+            return MODEL_CLIPPLUS;
     }
 
     return MODEL_UNKNOWN;
diff --git a/rbutil/mkamsboot/mkamsboot.h b/rbutil/mkamsboot/mkamsboot.h
index 647770ff46..06fd329c8c 100644
--- a/rbutil/mkamsboot/mkamsboot.h
+++ b/rbutil/mkamsboot/mkamsboot.h
@@ -41,6 +41,7 @@ enum {
     MODEL_E200V2,
     MODEL_M200V4,
     MODEL_C200V2,
+    MODEL_CLIPPLUS,
 };
 
 
diff --git a/tools/configure b/tools/configure
index d14875aef1..33c272d1b1 100755
--- a/tools/configure
+++ b/tools/configure
@@ -900,14 +900,14 @@ cat <<EOF
  ==Onda==                                        59) Sansa c200v2
  120) VX747               ==Meizu==              60) Sansa Clipv2
  121) VX767               110) M6SL              61) Sansa View
- 122) VX747+              111) M6SP
- 123) VX777               112) M3                ==Logik==
-                                                 80) DAX 1GB MP3/DAB
- ==Samsung==              ==Tatung==
- 140) YH-820              150) Elio TPJ-1022     ==Lyre project==
- 141) YH-920                                     130) Lyre proto 1
- 142) YH-925                                     131) Mini2440
- 143) YP-S3
+ 122) VX747+              111) M6SP              62) Sansa Clip+
+ 123) VX777               112) M3
+                                                 ==Logik==
+ ==Samsung==              ==Tatung==             80) DAX 1GB MP3/DAB
+ 140) YH-820              150) Elio TPJ-1022
+ 141) YH-920                                     ==Lyre project==1
+ 142) YH-925                                     130) Lyre proto 1
+ 143) YP-S3                                      131) Mini2440
 EOF
 
   buildfor=`input`;
@@ -2048,6 +2048,26 @@ fi
     t_model="sansa-view"
     ;;
 
+   62|sansaclipplus)
+    target_id=66
+    modelname="sansaclipplus"
+    target="-DSANSA_CLIPPLUS"
+    memory=8
+    arm926ejscc
+    bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
+    bmp2rb_native="$bmp2rb_mono"
+    tool="$rootdir/tools/scramble -add=cli+"
+    output="rockbox.sansa"
+    bootoutput="bootloader-clipplus.sansa"
+    appextra="recorder:gui"
+    plugins="yes"
+    swcodec="yes"
+    toolset=$scramblebitmaptools
+    t_cpu="arm"
+    t_manufacturer="as3525"
+    t_model="sansa-clipplus"
+    ;;
+
    150|tatungtpj1022)
     target_id=25
     modelname="tatungtpj1022"
diff --git a/tools/scramble.c b/tools/scramble.c
index 9bfdbda905..3ee8b26aa4 100644
--- a/tools/scramble.c
+++ b/tools/scramble.c
@@ -125,7 +125,7 @@ void usage(void)
            "\t                   tpj2, c200, e200, giga, gigs, m100, m500, d2,\n");
     printf("\t                   9200, 1630, 6330, ldax, m200, c100, clip, e2v2,\n"
            "\t                   m2v4, fuze, c2v2, clv2, y820, y920, y925, x747,\n"
-           "\t                   747p, x777, nn2g, m244)\n");
+           "\t                   747p, x777, nn2g, m244, cli+)\n");
     printf("\nNo option results in Archos standard player/recorder format.\n");
 
     exit(1);
@@ -320,6 +320,8 @@ int main (int argc, char** argv)
             modelnum = 64;
         else if (!strcmp(&argv[1][5], "6330")) /* Philips HDD6330 */
             modelnum = 65;
+        else if (!strcmp(&argv[1][5], "cli+")) /* Sansa Clip+ */
+            modelnum = 66;
         else if (!strcmp(&argv[1][5], "m244"))
             modelnum = 131;
         else {