fuzev2: make manual build

Use the same info than Clipv1/v2 to warn about the version
(the path in OF menu to check the version has just one more component on Fuze)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26205 a1c6a512-1295-4272-9138-f99709370657

5 files changed, 42 insertions, 18 deletions

diff --git a/manual/getting_started/installation.tex b/manual/getting_started/installation.tex
index 9e6b6feaa7..2717b5cfe5 100644
--- a/manual/getting_started/installation.tex
+++ b/manual/getting_started/installation.tex
@@ -11,7 +11,7 @@ before beginning there are a few things it is important to know.
 follow the instructions at 
 \url{http://www.rockbox.org/twiki/bin/view/Main/SansaE200RInstallation}.}}
 
-\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2,clipv1,clipv2,cowond2,fuze}{
+\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2,clipv1,clipv2,cowond2,fuze,fuzev2}{
 \begin{description}  
 \item[Supported hardware versions.] 
     \opt{ipodnano,ipodnano2g}{
@@ -43,19 +43,13 @@ follow the instructions at
     v2 firmware begins with 03. Make sure that you are following the
     instructions from the correct manual.
 }
-  \opt{clipv1,clipv2}{
+  \opt{clipv1,clipv2,fuze,fuzev2}{
     The \playertype{} is available in multiple versions, and you need to make
-    sure which you have by checking the Sandisk firmware version number under 
-    Settings $\rightarrow$ Info. The v1 firmware is named 01.xx.xx, while the
-    v2 firmware begins with 02. Make sure that you are following the
-    instructions from the correct manual.
-}
-  \opt{fuze}{
-    The \playertype{} is available in multiple versions, not all of which
-    run Rockbox.  Rockbox doesn't run on the newer v2 models. They can be
-    identified by checking the Sandisk firmware version number under 
-    System Settings $\rightarrow$ System Info. The v1 firmware is named
-    01.xx.xx, while the v2 firmware begins with 02.
+    sure which you have by checking the Sandisk firmware version number under
+    Settings $\rightarrow$ \opt{fuze,fuzev2}{System Settings $\rightarrow$}
+    Info. The v1 firmware is named 01.xx.xx, while the v2 firmware begins with
+    02. Make sure that you are following the instructions from the correct
+    manual.
 }
   \opt{cowond2}{
     Rockbox runs on all \playerman{} \playertype{} and \playertype{}+ variants
diff --git a/manual/getting_started/sansaAMS_install.tex b/manual/getting_started/sansaAMS_install.tex
index 44bfa2c64b..3f3fbd97c5 100644
--- a/manual/getting_started/sansaAMS_install.tex
+++ b/manual/getting_started/sansaAMS_install.tex
@@ -7,7 +7,7 @@ files:
   \item An original firmware (OF) from 
     \opt{e200v2}{
       \url{http://forums.sandisk.com/sansa/board/message?board.id=e200&thread.id=13548}}
-    \opt{fuze}{
+    \opt{fuze,fuzev2}{
       \url{http://forums.sandisk.com/sansa/board/message?board.id=sansafuse&thread.id=23276}}
     \opt{clipv1,clipv2}{
       \url{http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=15109}}
@@ -17,6 +17,7 @@ files:
   \item The bootloader: 
     \opt{e200v2}{\download{bootloader/sandisk-sansa/e200v2/bootloader-e200v2.sansa}}
     \opt{fuze}{\download{bootloader/sandisk-sansa/fuze/bootloader-fuze.sansa}}
+    \opt{fuzev2}{\download{bootloader/sandisk-sansa/fuzev2/bootloader-fuzev2.sansa}}
     \opt{clipv1}{\download{bootloader/sandisk-sansa/clip/bootloader-clip.sansa}}
     \opt{clipv2}{\download{bootloader/sandisk-sansa/clipv2/bootloader-clipv2.sansa}}
     \opt{clipplus}{\download{bootloader/sandisk-sansa/clipplus/bootloader-clipplus.sansa}}
@@ -39,6 +40,7 @@ files:
 
   \begin{code} 
     \opt{fuze}{mkamsboot.exe fuzea.bin bootloader-fuze.sansa patched.bin}
+    \opt{fuzev2}{mkamsboot.exe fuzpa.bin bootloader-fuzev2.sansa patched.bin}
     \opt{e200v2}{mkamsboot.exe e200pe.bin bootloader-e200v2.sansa patched.bin}
     \opt{clipv1}{mkamsboot.exe m300a.bin bootloader-clip.sansa patched.bin}
     \opt{clipv2}{mkamsboot.exe m30pa.bin bootloader-clipv2.sansa patched.bin}
@@ -51,7 +53,7 @@ files:
   root of the device and rename it to the same name as the OF file you downloaded earlier 
   \opt{fuze}{(``fuzea.bin''} \opt{e200v2}{(``e200pe.bin''}
   \opt{clipv1}{(``m300a.bin''} \opt{clipv2}{(``m30pa.bin''}
-  \opt{clipplus}{(``clppa.bin''} above).
+  \opt{clipplus}{(``clppa.bin''} \opt{fuzev2}{(``fuzpa.bin''} above).
 
 \item Safely eject the device, unplug USB and wait for the firmware update to finish.
 \end{enumerate}
@@ -70,6 +72,7 @@ files:
 
   \begin{code} 
     \opt{fuze}{./mkamsboot fuzea.bin bootloader-fuze.sansa patched.bin}
+    \opt{fuzev2}{./mkamsboot fuzpa.bin bootloader-fuzev2.sansa patched.bin}
     \opt{e200v2}{./mkamsboot e200pe.bin bootloader-e200v2.sansa patched.bin}
     \opt{clipv1}{./mkamsboot m300a.bin bootloader-clip.sansa patched.bin}
     \opt{clipv2}{./mkamsboot m30pa.bin bootloader-clipv2.sansa patched.bin}
@@ -82,7 +85,7 @@ files:
   root of the device and rename it to the same name as the OF file you downloaded earlier 
   \opt{fuze}{(``fuzea.bin''} \opt{e200v2}{(``e200pe.bin''}
   \opt{clipv1}{(``m300a.bin''} \opt{clipv2}{(``m30pa.bin''}
-  \opt{clipplus}{(``clppa.bin''} above).
+  \opt{clipplus}{(``clppa.bin''} \opt{fuzev2}{(``fuzpa.bin''} above).
 
 \item Safely eject the device, unplug USB and wait for the firmware update to finish.
 \end{enumerate}
diff --git a/manual/main_menu/main.tex b/manual/main_menu/main.tex
index cfe213296a..e0883dfad5 100644
--- a/manual/main_menu/main.tex
+++ b/manual/main_menu/main.tex
@@ -225,7 +225,7 @@ pages of information.}
   given seperately for internal memory (\emph{Int}) and for a plugged in
   memory card
   \opt{ondio}{(\emph{MMC})}
-  \opt{sansa,e200v2,fuze}{(\emph{MSD})}.
+  \opt{sansa,e200v2,fuze,fuzev2,clipplus}{(\emph{MSD})}.
 }%
 \nopt{multivolume}{Hard disk size and the amount of free space on the disk.}
 
diff --git a/manual/platform/sansafuzev2.tex b/manual/platform/sansafuzev2.tex
new file mode 100644
index 0000000000..aeff762f80
--- /dev/null
+++ b/manual/platform/sansafuzev2.tex
@@ -0,0 +1,27 @@
+% $Id$ %
+\def\UseOption{fuzev2}
+\edef\UseOption{\UseOption,SANSA_FUZE_PAD}
+\edef\UseOption{\UseOption,HAVE_BACKLIGHT}
+\edef\UseOption{\UseOption,HAVE_CAR_ADAPTER_MODE}
+\edef\UseOption{\UseOption,HAVE_BUTTON_LIGHTS}
+\edef\UseOption{\UseOption,sansaAMS}
+\edef\UseOption{\UseOption,HAVE_RB_BL_IN_FLASH}
+
+\newcommand{\playerman}{Sansa}
+\newcommand{\playertype}{Fuze v2}
+\newcommand{\playerlongtype}{\playertype}
+\newcommand{\dapdisplaywidth}{220}
+\newcommand{\dapdisplayheight}{176}
+\newcommand{\dapdisplaydepth}{16}
+\newcommand{\specimg}{sansafuze}
+%Used to name the player, e.g. ...to the \dap
+\newcommand{\dap}{player}
+%For use when referring to the player. E.g. the \daps\ capacity ...
+\newcommand{\daps}{player's}
+\newcommand{\firmwarefilename}{\fname{rockbox.sansa}}
+\newcommand{\firmwareextension}{\fname{sansa}}
+\newcommand{\screenshotsize}{4cm}
+\newcommand{\disk}{flash storage}
+
+% link external keymap file
+\input{platform/keymap-sansafuze.tex}
diff --git a/manual/rockbox_interface/main.tex b/manual/rockbox_interface/main.tex
index e66ba0c926..067e98c9f2 100644
--- a/manual/rockbox_interface/main.tex
+++ b/manual/rockbox_interface/main.tex
@@ -369,7 +369,7 @@ detail in the following paragraph.
   Immediately above the headphone socket is a lanyard loop and the microphone.
   }
   %
-  \opt{fuze}{
+  \opt{fuze,fuzev2}{
   Hold the \dap{} with the controls on the bottom and the screen on the top. The main
   controls are a scroll wheel with four clickable points and a button in the centre; pressing
   this centre button functions as \ButtonSelect{}. Going clockwise from the top, the clickable