Sansa AMSv2: initialise PMU (power management unit), inspired by how the OF does it

Differences in PMU settings:
- explicitly disable the PLL inside the PMU (we don't use it)
- don't increase the PVDD1/AVDD17 voltages because the impact on runtime is still unclear

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30571 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 17 insertions, 3 deletions

diff --git a/firmware/target/arm/as3525/system-as3525.c b/firmware/target/arm/as3525/system-as3525.c
index 8f64597f4f..58f08a7d19 100644
--- a/firmware/target/arm/as3525/system-as3525.c
+++ b/firmware/target/arm/as3525/system-as3525.c
@@ -270,6 +270,23 @@ void system_init(void)
     dma_init();
 
     ascodec_init();
+    
+#if (CONFIG_CPU == AS3525v2)
+    /* PLL:       disable audio PLL, we use MCLK already */
+    ascodec_write_pmu(0x1A, 7, 0x02);
+    /* DCDC_Cntr: set switching speed of CVDD1/2 power supplies to 1 MHz */
+    ascodec_write_pmu(0x17, 7, 0x30);
+    /* Out_Cntr2: set drive strength of 24 MHz and 32 kHz clocks to 1 mA */
+    ascodec_write_pmu(0x1A, 2, 0xCC);
+    /* CHGVBUS2:  set VBUS threshold to 3.18V and EOC threshold to 30% CC */
+    ascodec_write_pmu(0x19, 2, 0x41);
+#if 0   /* don't set higher voltage until impact on runtime has been checked */
+    /* PVDD1:     set PVDD1 power supply to 2.5 V */
+    ascodec_write_pmu(0x18, 1, 0x35);
+    /* AVDD17:    set AVDD17 power supply to 2.5V */
+    ascodec_write_pmu(0x18, 7, 0x31);
+#endif
+#endif /* (CONFIG_CPU == AS3525v2) */
 
 #ifndef BOOTLOADER
     /* setup isr for microsd monitoring and for fuzev2 scrollwheel irq */
diff --git a/firmware/target/arm/powermgmt-ascodec.c b/firmware/target/arm/powermgmt-ascodec.c
index c8bd1cd51f..bab40e113a 100644
--- a/firmware/target/arm/powermgmt-ascodec.c
+++ b/firmware/target/arm/powermgmt-ascodec.c
@@ -126,9 +126,6 @@ static void enable_charger(void)
 void powermgmt_init_target(void)
 {
     /* Everything CHARGER, OFF! */
-#if CONFIG_CPU == AS3525v2
-    ascodec_write_pmu(AS3543_CHARGER, 2, 0x01); //EOC current theshold 30%
-#endif
     ascodec_monitor_endofch();
     ascodec_write_charger(TMPSUP_OFF | CHG_I_50MA | CHG_V_3_90V | CHG_OFF);
 }