From 1499c39963c3b893157264b2a57b705c78b0bb09 Mon Sep 17 00:00:00 2001
From: Björn Stenberg <bjorn@haxx.se>
Date: Thu, 28 Mar 2002 10:06:51 +0000
Subject: Initial version

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@43 a1c6a512-1295-4272-9138-f99709370657
---
 www/internals/bjorn.t | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 www/internals/bjorn.t

(limited to 'www/internals/bjorn.t')

diff --git a/www/internals/bjorn.t b/www/internals/bjorn.t
new file mode 100644
index 0000000000..3c569d73ad
--- /dev/null
+++ b/www/internals/bjorn.t
@@ -0,0 +1,47 @@
+#define _PAGE_ Dissecting the Jukebox 6000
+#include "head.t"
+
+<p>Taking the Archos apart requires a torx driver and a <i>very</i> small phillips head screwdriver. The phillips screwheads are about 2mm in diameter.
+
+<p>Also see the page dedicated to
+<a href="../mods/disassemble.html">disassembling the archos</a>.
+
+<p>
+<a href="archos1.jpg"><img src="archos1t.jpg"></a>
+<a href="archos2.jpg"><img src="archos2t.jpg"></a>
+<a href="archos3.jpg"><img src="archos3t.jpg"></a>
+<a href="archos4.jpg"><img src="archos4t.jpg"></a>
+
+<p>The two circuit boards in the Archos are here called the "top" and "bottom" board. They are both populated on both sides.
+
+<h3>Bottom of bottom board</h3>
+
+<p><a href="archos_bottom.jpg"><img src="archos_b1.jpg"></a> (142kB). You will note five ICs in the picture:
+
+<ul>
+<li><a href="http://www.in-system.com/200_silicon.html">In-Systems ISD200</a> ATA to USB bridge
+<li><a href="http://www.ssti.com/products/37vfxxx.html">SST 37VF020</a> 2MB flash ROM
+<li><a href="http://www.issiusa.com/pdf/41c16105.pdf">ISSI IS41LV16105</a> 2MB fast page DRAM
+<li><a href="http://www.sipex.com/products/pdf/SP690_805ALM.pdf">Sipex SP692ACN</a> Low Power Microprocessor Supervisory with Battery Switch-Over (partly covered with white insulation in the photo)
+<li>A standard Motorola AC139 logic IC (text unreadable in the photo)
+</ul>
+
+<h3>Top of bottom board</h3>
+<p>Removing the bottom board involves bending a couple of metal holders that break very easily. Be careful. 
+The board is connected via two pin connectors, one at each end.
+<p><a href="archos_bottom2.jpg"><img src="archos_b2.jpg"></a> (211kB). ICs:
+<ul>
+<li>Archos DCMP3J, most likely an <a href="http://www.hitachi.co.jp/Sicd/English/Products/micom_all/l016e.htm">SH7034</a> SH-1 RISC with custom mask rom. (Thanks to Sven Karlsson.)
+<li><a href="http://focus.ti.com/docs/prod/folders/print/cd54hc573.html">TI HC573M</a> Latch (appears unlabeled in the photo)
+<li><a href="http://www.fairchildsemi.com/pf/74/74LCX245.html">Fairchild LCX245</a> Bidirectional Transceiver
+<li>A standard Motorola AC32 logic IC (xor)
+</ul>
+
+<h3>Bottom of top board</h3>
+<a href="archos_top.jpg"><img src="archos_t1.jpg"></a> (200kB). IC:s:
+<ul>
+<li><a href="http://www.micronas.com/products/documentation/consumer/mas3507d/index.php">Micronas MAS3507D</a> MPEG-1/2 Layer-2/3 Decoder
+<li><a href="http://www.micronas.com/products/documentation/consumer/dac3550a/index.php">Micronas DAC3550A</a> Stereo Audio DAC
+</ul>
+
+#include "foot.t"
-- 
cgit v1.2.3