From f40b15d0cbe726e72652fcd8ff775d08b19affda Mon Sep 17 00:00:00 2001
From: Amaury Pouly <amaury.pouly@gmail.com>
Date: Thu, 5 Sep 2013 23:14:07 +0200
Subject: hwstub: improve lcdif, digtctl, add sony nwz-e370

Change-Id: I5316cc9fd9addfca8a674628695fed1c1bf9269f
---
 utils/hwstub/tools/lua/sonynwze370.lua | 98 ++++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 utils/hwstub/tools/lua/sonynwze370.lua

(limited to 'utils/hwstub/tools/lua/sonynwze370.lua')

diff --git a/utils/hwstub/tools/lua/sonynwze370.lua b/utils/hwstub/tools/lua/sonynwze370.lua
new file mode 100644
index 0000000000..969a440a08
--- /dev/null
+++ b/utils/hwstub/tools/lua/sonynwze370.lua
@@ -0,0 +1,98 @@
+--
+-- Sony NWZ-E370
+--
+NWZE370 = {}
+
+function NWZE370.lcd_send(cmd, data)
+    STMP.lcdif.set_data_swizzle(0)
+    STMP.lcdif.set_byte_packing_format(0xf)
+    STMP.lcdif.send_pio(false, {cmd})
+    if #data ~= 0 then
+        STMP.lcdif.send_pio(true, data)
+    end
+end
+
+function NWZE370.lcd_set_update_rect(x, y, w, h)
+    NWZE370.lcd_send(0x2a, {0, x, 0, x + w - 1})
+    NWZE370.lcd_send(0x2b, {0, y, 0, y + h - 1})
+    NWZE370.lcd_send(0x2c, {})
+end
+
+function NWZE370.lcd_init()
+    STMP.pinctrl.lcdif.setup_system(8, false)
+    STMP.lcdif.init()
+    STMP.lcdif.set_databus_width(8)
+    STMP.lcdif.set_word_length(8)
+    STMP.lcdif.set_system_timing(2, 2, 2, 2)
+    STMP.lcdif.set_byte_packing_format(0xf)
+    STMP.lcdif.set_reset(1)
+    STMP.lcdif.set_reset(0)
+    STMP.lcdif.set_reset(1)
+
+    STMP.digctl.mdelay(150)
+    NWZE370.lcd_send(1, {}) -- software reset
+    NWZE370.lcd_send(0x11, {}) -- slee out
+    STMP.digctl.mdelay(150)
+    NWZE370.lcd_send(0x26, {4}) -- gamma set (curve 3)
+    NWZE370.lcd_send(0xb1, {9, 0xd}) -- frame rate (DIVA=9, VPA=13) => 88.9 Hz ?
+    NWZE370.lcd_send(0xc0, {8, 0}) -- power control 1 (GVDD=4.4 V, VCI1=2.75 V)
+    NWZE370.lcd_send(0xc1, {5}) -- power control 2 (setting 5)
+    NWZE370.lcd_send(0xc5, {0x31, 0x40}) -- VCOM control 1 (0x31, 0x40)
+    NWZE370.lcd_send(0xc7, {0xc8}) -- VCOM offset control (0xc8)
+    NWZE370.lcd_send(0xec, {0xc}) -- 
+    NWZE370.lcd_send(0x3a, {5}) -- interface pixel format (16 bit/pixel)
+    NWZE370.lcd_send(0x2a, {0, 0, 0, 0x7f}) -- column address (0, 127)
+    NWZE370.lcd_send(0x2b, {0, 0, 0, 0x9f}) -- page address set (0, 159)
+    NWZE370.lcd_send(0x35, {0}) -- tear effect line on (M=0)
+    NWZE370.lcd_send(0x36, {0xc8}) -- memory access control (MH=0, BGR, ML=MV=0, MX=MY=1)
+    NWZE370.lcd_send(0xb4, {0}) -- display inversion (NLA=NLB=NLC=0)
+    NWZE370.lcd_send(0xb7, {0}) -- source driver direction control (CRL=0)
+    NWZE370.lcd_send(0xb8, {0}) -- gate driver direction control (CTB=0)
+    NWZE370.lcd_send(0xf2, {1}) -- gamma adjustment (enable)
+    NWZE370.lcd_send(0xe0, {0x3f, 0x20, 0x1d, 0x2d, 0x26, 0xc, 0x4b, 0xb7,
+       0x39, 0x17, 0x1d, 0x16, 0x16, 0x10, 0}) -- positive gamma
+    NWZE370.lcd_send(0xe1, {0, 0x1f, 0x21, 0x12, 0x18, 0x13, 0x34, 0x48,
+       0x46, 8, 0x21, 0x29, 0x28, 0x2f, 0x3f}) --negative gamma
+    NWZE370.lcd_send(0x29, {}) -- display on
+
+    NWZE370.lcd_set_update_rect(10, 10, 20, 20)
+    for i = 0, 19 do
+        for j = 0, 19 do
+            pix = 0xf800
+            STMP.lcdif.send_pio(true, {bit32.band(pix, 0xff), bit32.rshift(pix, 8)})
+        end
+    end
+end
+
+function NWZE370.set_backlight(val)
+    
+end
+
+function NWZE370.init()
+    NWZE370.lcd_init()
+    --[[
+    HW.LRADC.CTRL0.SFTRST.clr()
+    HW.LRADC.CTRL0.CLKGATE.clr()
+    HW.LRADC.CHn[0].ACCUMULATE.clr()
+    HW.LRADC.CHn[0].NUM_SAMPLES.write(0)
+    HW.LRADC.CHn[0].VALUE.write(0)
+    local t = {}
+    for i = 1,1000,1 do
+        HW.LRADC.CTRL0.SCHEDULE.write(1)
+        --local time = HW.DIGCTL.MICROSECONDS.read()
+        local time = i * 1000
+        local val = HW.LRADC.CHn[0].VALUE.read()
+        t[#t + 1] = {time, val}
+    end
+    local file = io.open("data.txt", "w")
+    for i,v in ipairs(t) do
+        file:write(string.format("%d %d\n", v[1] / 1000, v[2]))
+    end
+    file:close()
+    print("Display curve using:")
+    print("gnuplot -persist");
+    print("> plot \"data.txt\" using 1:2")
+    ]]--
+end
+
+ 
-- 
cgit v1.2.3