From d8f32834d697d32efb7736117190ad9bbf120669 Mon Sep 17 00:00:00 2001 From: Dominik Riebeling Date: Sun, 17 Sep 2006 17:39:11 +0000 Subject: Adjust to general style and fix an opt spacing issue. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10977 a1c6a512-1295-4272-9138-f99709370657 --- manual/configure_rockbox/playback_options.tex | 74 +++++++++++++-------------- 1 file changed, 37 insertions(+), 37 deletions(-) (limited to 'manual') diff --git a/manual/configure_rockbox/playback_options.tex b/manual/configure_rockbox/playback_options.tex index 8fdf06a2cf..76c3bd2b8c 100755 --- a/manual/configure_rockbox/playback_options.tex +++ b/manual/configure_rockbox/playback_options.tex @@ -3,16 +3,16 @@ The \setting{Playback Options} submenu allows you to configure settings related to audio playback. \begin{description} -\item[Shuffle: ]Alters how Rockbox will select which next song to play.\\ +\item[Shuffle. ]Alters how Rockbox will select which next song to play.\\ Options: \setting{On}/\setting{Off}. % -\item[Repeat: ]Configures settings related to repeating of directories or +\item[Repeat. ]Configures settings related to repeating of directories or playlists.\\ Options: \setting{Off} / \setting{All} / \setting{One} / \setting{Shuffle} \nopt{ondiosp,ondiofm}{\setting{/A-B}}: \begin{description} % - \item[Off: ]The current directory or playlist will not repeat + \item[Off. ]The current directory or playlist will not repeat when it is finished. \note{If you have the \setting{Auto change directory} option set to \setting{Yes}, Rockbox will move on to the next directory on your @@ -20,7 +20,7 @@ related to audio playback. \setting{No}, playback will stop when the current directory or playlist is finished.} % - \item[All: ]The current directory or playlist will repeat when it is + \item[All. ]The current directory or playlist will repeat when it is finished. \note{This option does \emph{not} shuffle all files on your \dap. Rockbox is playlist oriented. When you play a song, a directory, or @@ -29,13 +29,13 @@ related to audio playback. the player, and play that playlist with shuffle mode set to \setting{All}.} % - \item[One: ]Repeat one track over and over. + \item[One. ]Repeat one track over and over. % - \item[Shuffle: ]When the current directory or playlist has finished + \item[Shuffle. ]When the current directory or playlist has finished playing, it will be shuffled and then repeated. % \nopt{ondiosp,ondiofm}{ - \item[A-B: ]Repeats between two user defined points within a track, + \item[A-B. ]Repeats between two user defined points within a track, typically used by musicians when attempting to learn a piece of music. This option is more complicated to use than the others as the \dap\ must first be placed into A-B repeat mode and then the start and end @@ -47,19 +47,19 @@ related to audio playback. } \end{description} -\item[Play Selected First: ]This setting controls what happens when you +\item[Play Selected First. ]This setting controls what happens when you select a file for playback while shuffle mode is on. If the \setting{Play Selected First} setting is \setting{Yes}, the file you selected will be played first. If this setting is \setting{No}, a random file in the directory will be played first. -\item[Resume: ]Rockbox can be configured to start playing automatically +\item[Resume. ]Rockbox can be configured to start playing automatically when you turn on the \dap. If the resume function is set to start automatically playing, Rockbox will start at the point where you last turned off the \dap. The options for the \setting{Resume} function are: \begin{description} - \item[Yes: ]Rockbox will unconditionally try to resume. - \item[No: ]Rockbox will not resume. + \item[Yes. ]Rockbox will unconditionally try to resume. + \item[No. ]Rockbox will not resume. \note{If resume is set to \setting{No}, Rockbox will start in the \setting{File Browser}.} \end{description} @@ -69,18 +69,18 @@ related to audio playback. pressing \opt{PLAYER_PAD,RECORDER_PAD,IAUDIO_X5_PAD,IPOD_4G_PAD,IPOD_3G_PAD}{ \fixme{FixMe}}% - \opt{ONDIO_PAD}{\ButtonMenu}% - \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn}% + \opt{ONDIO_PAD}{\ButtonMenu{}}% + \opt{IRIVER_H100_PAD,IRIVER_H300_PAD}{\ButtonOn{}} % on the \dap{} will resume playback from the point where the \dap{} was stopped before shutdown. - \item[Fast-Forward/Rewind: ]How fast you want search (fast forward or rewind) + \item[Fast-Forward/Rewind. ]How fast you want search (fast forward or rewind) to accelerate when you hold down the button. \setting{Off} means no acceleration. \setting{2x/1s} means double the search speed once every second the button is held. \setting{2x/5s} means double the search speed once every 5 seconds the button is held. - \item[Anti-Skip Buffer: ]This setting allows you to control how much music is + \item[Anti-Skip Buffer. ]This setting allows you to control how much music is stored in the \daps{} memory whilst playing a song, acting as a buffer against shock or playback problems. The \dap{} transfers the selected amount of the forthcoming song into its memory at high speed whilst you are @@ -99,57 +99,57 @@ related to audio playback. \nopt{ondio}{ \opt{MASCODEC}{The anti-skip buffer can be set to a value between 0 and 7 seconds.} - } + }% \opt{ondio}{ The anti-skip buffer can safely be kept at zero. It will eventually be eliminated. - } + }% \opt{SWCODEC}{The anti-skip buffer can be set to various values between - 5 seconds and 10 minutes.} + 5 seconds and 10 minutes.}% \note{Having a large anti-skip buffer tends to use more power, and may reduce your battery life. It is recommended to always use the lowest possible setting that allows correct and continuous playback.} - \item[Fade On Stop/Pause: ]Enables and disables a fade effect when you + \item[Fade On Stop/Pause. ]Enables and disables a fade effect when you pause or stop playing a song. If the Fade on Stop/Pause option is set to \setting{Yes}, your music will fade out when you stop or pause playback, and fade in when you resume playback. - \item[Party Mode: ]Enables unstoppable music playback. When new songs are + \item[Party Mode. ]Enables unstoppable music playback. When new songs are selected, they are added to the end of the current dynamic playlist instead of being played immediately. The \fixme{PLAY} and \fixme{STOP} buttons are disabled. \opt{SWCODEC}{ - \item[Crossfade: ] + \item[Crossfade. ] This setting enables a cross-fader. At the end of a song, the song will fade out as the next song fades in, creating a smooth transition between songs.\\ Options: \begin{description} - \item[Enable Crossfade: ]If set to \setting{Off}, crossfade is disabled. + \item[Enable Crossfade. ]If set to \setting{Off}, crossfade is disabled. If set to \setting{Always}, songs will always crossfade into one another. If set to \setting{Shuffle}, crossfade is enabled when the shuffle feature is set to \setting{Yes}, but disabled otherwise. If set to track skip only, tracks will only crossfade when you manually change tracks. % - \item[Fade In Delay: ]The ``fade in delay'' is the length of time between + \item[Fade In Delay. ]The ``fade in delay'' is the length of time between when the crossfade process begins and when the new track begins to fade in. % - \item[Fade In Duration: ]The length of time, in seconds, that it takes + \item[Fade In Duration. ]The length of time, in seconds, that it takes your music to fade in. % - \item[Fade Out Delay: ]The ``fade out delay'' is the length of time + \item[Fade Out Delay. ]The ``fade out delay'' is the length of time between when the crossfade process begins and when the old track begins to fade out. % - \item[Fade Out Duration: ]The length of time, in seconds, that it takes + \item[Fade Out Duration. ]The length of time, in seconds, that it takes your music to fade out. % - \item[Fade Out Mode: ]If set to \setting{Crossfade}, one song will fade + \item[Fade Out Mode. ]If set to \setting{Crossfade}, one song will fade out and the next song will simultaneously fade in. If set to \setting{Mix}, the ending song will continue to play as normal until its end, while the starting song will fade in from under it. @@ -159,10 +159,10 @@ related to audio playback. \note{The crossfade setting is particularly effective when the player is set on shuffle.} - } + }% \opt{SWCODEC}{ - \item[Replaygain: ]This allows you to control the replaygain function. + \item[Replaygain. ]This allows you to control the replaygain function. The purpose of replaygain is to adjust the volume of the music played so that all songs (or albums, depending on your settings) have the same apparent volume. This prevents sudden changes in volume when @@ -173,29 +173,29 @@ related to audio playback. Options for replaygain are: \begin{description} - \item[Enable Replaygain: ]This turns on/off the replaygain function. + \item[Enable Replaygain. ]This turns on/off the replaygain function. % - \item[Prevent Clipping: ]Avoid clipping of a song's waveform. + \item[Prevent Clipping. ]Avoid clipping of a song's waveform. If a song would clip during playback, the volume is lowered for that song. Replaygain information is needed for this to work. % - \item[Replaygain type: ]Choose the type of replaygain to apply: + \item[Replaygain type. ]Choose the type of replaygain to apply: \begin{description} - \item[Album Gain: ]Maintain a constant volume level between + \item[Album Gain. ]Maintain a constant volume level between albums, but keep any intentional volume variations between songs in an album. (If album gain value is not available, uses track gain information). % - \item[Track Gain: ]Maintain a constant volume level between + \item[Track Gain. ]Maintain a constant volume level between tracks. If track gain value is not available, no replaygain is applied. % - \item[Track Gain if Shuffling: ]Maintains a constant volume + \item[Track Gain if Shuffling. ]Maintains a constant volume between tracks if shuffle mode is selected. Reverts to album mode if shuffle is off. \end{description} % - \item[Pre-Amp: ]This allows you to adjust the volume when replaygain + \item[Pre-Amp. ]This allows you to adjust the volume when replaygain is applied. Replaygain often lowers the volume, sometimes quite much, so here you can compensate for that. Please note that a (large) positive pre-amp setting can cause clipping, unless @@ -204,7 +204,7 @@ related to audio playback. \end{description} } } -\item[Auto Change Directory: ]Control what Rockbox does when it reaches the end +\item[Auto Change Directory. ]Control what Rockbox does when it reaches the end of a directory. If Auto Change Directory is set to \setting{Yes}, Rockbox will continue to the next directory. If \setting{Auto Change Directory} is set to \setting{No}, playback will stop at the end of the current directory. -- cgit v1.2.3