From 93afea0cd05862ac0b573a7abd471eefc1291463 Mon Sep 17 00:00:00 2001 From: Tomer Shalev Date: Tue, 15 Dec 2009 19:56:03 +0000 Subject: Cowon D2 manual: Platform specific information and installation instructions FS#10735 - Platform files for Cowon D2 manual Author: Aleksei Kaveshnikov (4nykey) I've modified the original patch to comply with current state of both the player and manual. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24008 a1c6a512-1295-4272-9138-f99709370657 --- manual/configure_rockbox/sound_settings.tex | 6 +++ manual/configure_rockbox/system_options.tex | 1 + manual/getting_started/cowond2_install.tex | 28 +++++++++++ manual/getting_started/installation.tex | 52 +++++++++++++++++++-- .../images/ss-fm-radio-screen-320x240x16.png | Bin 0 -> 10575 bytes manual/platform/cowond2.tex | 2 + manual/rockbox_interface/main.tex | 35 ++++++++++++-- 7 files changed, 115 insertions(+), 9 deletions(-) create mode 100644 manual/getting_started/cowond2_install.tex create mode 100644 manual/main_menu/images/ss-fm-radio-screen-320x240x16.png (limited to 'manual') diff --git a/manual/configure_rockbox/sound_settings.tex b/manual/configure_rockbox/sound_settings.tex index 565fd53f48..6291b5f64a 100644 --- a/manual/configure_rockbox/sound_settings.tex +++ b/manual/configure_rockbox/sound_settings.tex @@ -327,6 +327,7 @@ change to customise your listening experience. \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{\ButtonUp} \opt{SANSA_E200_PAD}{\ButtonScrollBack} \opt{GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonRight} + \opt{COWON_D2_PAD}{\TouchMidRight} \opt{HAVEREMOTEKEYMAP}{& \opt{IRIVER_RC_H100_PAD,GIGABEAT_RC_PAD}{\ButtonRCFF} } @@ -336,6 +337,7 @@ change to customise your listening experience. \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{\ButtonDown} \opt{SANSA_E200_PAD}{\ButtonScrollFwd} \opt{GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonLeft} + \opt{touchscreen}{\TouchMidLeft} \opt{HAVEREMOTEKEYMAP}{& \opt{IRIVER_RC_H100_PAD,GIGABEAT_RC_PAD}{\ButtonRCRew} } @@ -344,6 +346,7 @@ change to customise your listening experience. \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{\ButtonLeft} \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_VIDEO_PAD}{\ButtonLeft} \opt{SANSA_E200_PAD,GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonUp} + \opt{COWON_D2_PAD}{\ActionStdPrev} \opt{HAVEREMOTEKEYMAP}{& } \opt{GIGABEAT_RC_PAD}{\ButtonRCVolUp} & Moves to the previous EQ band. \\ @@ -351,12 +354,14 @@ change to customise your listening experience. \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,IAUDIO_X5_PAD}{\ButtonRight} \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_VIDEO_PAD}{\ButtonRight} \opt{SANSA_E200_PAD,GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonDown} + \opt{COWON_D2_PAD}{\ActionStdNext} \opt{HAVEREMOTEKEYMAP}{& } \opt{GIGABEAT_RC_PAD}{\ButtonRCVolDown} & Moves to the next EQ band. \\ % \opt{IRIVER_H100_PAD,IRIVER_H300_PAD,GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonSelect} \opt{IAUDIO_X5_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_VIDEO_PAD,SANSA_E200_PAD}{\ButtonSelect} + \opt{touchscreen}{\ButtonMenu{} or \TouchCenter} \opt{HAVEREMOTEKEYMAP}{& \opt{IRIVER_RC_H100_PAD}{\ButtonRCSelect} \opt{GIGABEAT_RC_PAD}{\ButtonRCPlay} @@ -369,6 +374,7 @@ change to customise your listening experience. \opt{IAUDIO_X5_PAD}{\ButtonPower/\ButtonRec} \opt{SANSA_E200_PAD}{\ButtonPower/\ButtonRight} \opt{GIGABEAT_PAD,GIGABEAT_S_PAD}{\ButtonPower} + \opt{touchscreen}{\ButtonPower{} or \TouchTopLeft} \opt{HAVEREMOTEKEYMAP}{& \opt{IRIVER_RC_H100_PAD}{\ButtonRCStop} \opt{GIGABEAT_RC_PAD}{\ButtonRCDsp} diff --git a/manual/configure_rockbox/system_options.tex b/manual/configure_rockbox/system_options.tex index bc513aa07f..e7f70b8f0f 100644 --- a/manual/configure_rockbox/system_options.tex +++ b/manual/configure_rockbox/system_options.tex @@ -29,6 +29,7 @@ \opt{m5,x5}{950mAh}% \opt{gigabeatf}{2000mAh}% \opt{gigabeats}{700mAh}% + \opt{cowond2}{1600mAh}% , which is the capacity value for the standard \opt{archos}{batteries}\nopt{archos}{battery} shipped with the \dap. Rockbox uses this value for runtime estimation, not battery percentage diff --git a/manual/getting_started/cowond2_install.tex b/manual/getting_started/cowond2_install.tex new file mode 100644 index 0000000000..f264ee96d8 --- /dev/null +++ b/manual/getting_started/cowond2_install.tex @@ -0,0 +1,28 @@ +\begin{enumerate} +\item Get a copy of the original \playerman{} \playertype{} firmware from + \url{http://www.cowonglobal.com/zeroboard/zboard.php?id=C08&bmenu=support}. + It has to be of the same version that is currently installed on your \dap{}. + +\item Build the mktccboot tool or download a binary for your operating system. + +\item Build the bootloader (\fname{bootloader-cowond2.bin}). Pre-built binary + is available at \download{bootloader/cowon/d2/bootloader-cowond2.bin}. + +\item Patch the bootloader into the \playerman{} firmware using mktccboot: + \begin{code} + mktccboot D2N.bin bootloader-cowond2.bin D2N-patched.bin + \end{code} + \note{The filename depends on the firmware version and hardware revision as + shown in the table below (for the \playertype{} use the file found in folder + ``\fname{1}'', not ``\fname{0}'') + \begin{table} + \begin{rbtabular}{0.6\textwidth}{XXX}% + { \textbf{FW / HW} & \textbf{\playertype{}} & \textbf{\playertype{}+}}{}{} + \textbf{1.xx, 3.xx} & \fname{D2.bin} & \fname{D2\_P.bin} \\ + \textbf{2.xx, 4.xx} & \fname{D2N.bin} & \fname{D2N\_P.bin} \\ + \end{rbtabular} + \end{table}} + +\item Copy the output file (``\fname{D2N-patched.bin}'' in our example) to the + root of the \daps{} internal memory and rename it according to the above table. +\end{enumerate} diff --git a/manual/getting_started/installation.tex b/manual/getting_started/installation.tex index a32027d5f2..5943e4ecde 100644 --- a/manual/getting_started/installation.tex +++ b/manual/getting_started/installation.tex @@ -11,7 +11,7 @@ before beginning there are a few things it is important to know. follow the instructions at \url{http://www.rockbox.org/twiki/bin/view/Main/SansaE200RInstallation}.}} -\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2,clip}{ +\opt{ipodnano,ipodnano2g,ipodvideo,e200,c200,e200v2,clip,cowond2}{ \begin{description} \item[Supported hardware versions.] \opt{ipodnano,ipodnano2g}{ @@ -50,10 +50,39 @@ follow the instructions at Settings $\rightarrow$ System Info. The v1 firmware is named 01.xx.xx, while the v2 firmware begins with 02. In addition, Rockbox does not run on the Clip+. +} + \opt{cowond2}{ + Rockbox runs on all \playerman{} \playertype{} and \playertype{}+ variants + (2 / 4 / 8 / 16GB, with or without DAB/DMB). + \note{Newer \playertype{}+ hardware revisions use an updated power + management chip, and some functionality is not yet implemented on these + players (e.g. touchscreen support).} } \end{description} } +\opt{cowond2}{ +\begin{description} + \item[Current limitations.] Most Rockbox functions are usable on the + \playertype{}/\playertype{}+, including music playback and most plugins, but + there are a number of shortcomings that prevent it from being a fully + supported target: + \begin{itemize} + \item An SD card is required to use many features, since the internal + flash memory is read-only in Rockbox. + \warn{The SD driver is still in development and may contain bugs. + There have been reports of SD cards becoming unusable after being used + with Rockbox on \playerman{} \playertype{}. Only use old, low-capacity + cards until we are satisfied the driver is safe to use.\\} + \item There is only basic touchscreen support. Further work is + required to make the UI more usable with a touchscreen in general. + \note{The touchscreen can be used in two modes, either a 3x3 grid mode + which divides the screen into areas to emulate a set of physical + buttons (the default setting), or ``absolute point'' mode where the + touchscreen is used to point to items on the screen.\\} + \end{itemize} +\end{description} +} \opt{h300}{ \begin{description} \item[DRM capability.] If your \dap{} has a US firmware, then by installing Rockbox you will @@ -373,7 +402,12 @@ data partiton.}} \item Take the \fname{.zip} file that you downloaded and use the ``Extract all'' command of your unzip program to extract - the files onto \opt{gigabeats}{the main data partition of }your \dap{}. + the files onto% + \opt{gigabeats}{the main data partition of } + \opt{cowond2}{either an SD card or the internal memory of } + your \dap{}. + \opt{cowond2}{\note{If you have chosen to extract to the internal memory, it + will not be possible to save settings.}} \end{enumerate} \note{The entire contents of the \fname{.zip} file should be extracted @@ -407,6 +441,7 @@ structure that Rockbox needs.\\} \opt{sansa}{\input{getting_started/sansa_install.tex}} \opt{sansaAMS}{\input{getting_started/sansaAMS_install.tex}} \opt{mrobe100}{\input{getting_started/mrobe100_install.tex}} + \opt{cowond2}{\input{getting_started/cowond2_install.tex}} }} \subsection{Finishing the install}\label{ref:finish_install} @@ -437,7 +472,7 @@ structure that Rockbox needs.\\} \end{itemize} } -\opt{h10,h10_5gb,ipod,mrobe100,sansa,archos,sansaAMS}{ +\opt{h10,h10_5gb,ipod,mrobe100,sansa,archos,sansaAMS,cowond2}{ Safely eject / unmount the USB drive, unplug the cable and restart. } @@ -482,7 +517,7 @@ Rockbox Utility can also aid in the production of talk files, which allow Rockbo to speak file and folder names. \section{Running Rockbox} -\nopt{ipod,gigabeats}{When +\nopt{ipod,gigabeats,cowond2}{When you turn the unit on, Rockbox should load.} \opt{ipod}{Hard reset the Ipod by holding \opt{IPOD_4G_PAD}{\ButtonMenu{}+\ButtonSelect{}}% @@ -501,6 +536,15 @@ you turn the unit on, Rockbox should load.} See \reference{ref:database} for more information.} } +\opt{cowond2}{ + To boot the Rockbox firmware set the \ButtonHold{} switch immediately after + power on.\\ + \note{If you have chosen to install to an SD card and it is inserted at power + on, Rockbox will boot from that card and use it as the primary drive for + storing settings, etc. If there is no SD card inserted, Rockbox will boot + from the internal memory, and it will not be possible to save settings.} +} + \opt{ipod}{ \note{ If you have loaded music onto your \dap{} using Itunes, diff --git a/manual/main_menu/images/ss-fm-radio-screen-320x240x16.png b/manual/main_menu/images/ss-fm-radio-screen-320x240x16.png new file mode 100644 index 0000000000..cf161f4475 Binary files /dev/null and b/manual/main_menu/images/ss-fm-radio-screen-320x240x16.png differ diff --git a/manual/platform/cowond2.tex b/manual/platform/cowond2.tex index c43b3d42c2..12c2a05c49 100644 --- a/manual/platform/cowond2.tex +++ b/manual/platform/cowond2.tex @@ -3,6 +3,8 @@ \edef\UseOption{\UseOption,COWON_D2_PAD} \edef\UseOption{\UseOption,HAVE_BACKLIGHT} \edef\UseOption{\UseOption,HAVE_RB_BL_IN_FLASH} +\edef\UseOption{\UseOption,HAVE_CAR_ADAPTER_MODE} +\edef\UseOption{\UseOption,cowond2} \newcommand{\playerman}{Cowon} \newcommand{\playertype}{D2} diff --git a/manual/rockbox_interface/main.tex b/manual/rockbox_interface/main.tex index fda6ff2413..c74ade9b46 100644 --- a/manual/rockbox_interface/main.tex +++ b/manual/rockbox_interface/main.tex @@ -18,9 +18,27 @@ \end{center} Throughout this manual, the buttons on the \dap{} are labelled according to the -picture above. Whenever a button name is prefixed by ``Long'', a long press of -approximately one second should be performed on that button. The buttons are -described in detail in the following paragraph. +picture above. +\opt{touchscreen}{ +The areas of the touchscreen in the 3x3 grid mode are in turn referred as follows: +\begin{table} + \begin{center} + %\begin{tabularx}{.82\textwidth}{l|c|r} + \begin{tabularx}{.9\textwidth}{X|X|X} + \toprule + \TouchTopLeft & \TouchTopMiddle & \TouchTopRight \\ + \midrule + \TouchMidLeft & \TouchCenter & \TouchMidRight \\ + \midrule + \TouchBottomLeft & \TouchBottomMiddle & \TouchBottomRight \\ + \bottomrule + \end{tabularx} + \end{center} +\end{table} +} +Whenever a button name is prefixed by ``Long'', a long press of approximately +one second should be performed on that button. The buttons are described in +detail in the following paragraph. \blind{ Additional information for blind users is available on the Rockbox website at @@ -443,6 +461,8 @@ described in detail in the following paragraph. } \subsection{Turning the \dap{} on and off} +\opt{cowond2}{Rockbox has a dual-boot feature with the original firmware being + the default.\\} To turn on and off your Rockbox enabled \dap{} use the following keys: \begin{table} \begin{btnmap}{}{} @@ -452,8 +472,8 @@ To turn on and off your Rockbox enabled \dap{} use the following keys: \opt{ONDIO_PAD}{\ButtonOff}\opt{RECORDER_PAD,PLAYER_PAD}% {Long \ButtonOn}% \opt{IAUDIO_X5_PAD,IRIVER_H10_PAD,SANSA_E200_PAD,SANSA_C200_PAD% - ,GIGABEAT_PAD,MROBE100_PAD,GIGABEAT_S_PAD,sansaAMS,COWON_D2_PAD} - {\ButtonPower}% + ,GIGABEAT_PAD,MROBE100_PAD,GIGABEAT_S_PAD,sansaAMS}{\ButtonPower}% + \opt{COWON_D2_PAD} {\ButtonPower{}, then \ButtonHold}% \opt{HAVEREMOTEKEYMAP}{& \opt{IRIVER_RC_H100_PAD}{\ButtonRCOn}% } @@ -579,6 +599,11 @@ To turn on and off your Rockbox enabled \dap{} use the following keys: turn the \ButtonHold{} switch on just after turning on the \dap{}. } + \opt{cowond2} + { + Use \ButtonPower{} to boot the original \playerman{} firmware. + } + } \subsection{Putting music on your \dap{}} -- cgit v1.2.3