From ea669d7c4a07bbc1709a69b3b28d9e96b415c88f Mon Sep 17 00:00:00 2001
From: Alex Parker <rockbox@aeparker.com>
Date: Sat, 7 Nov 2009 12:31:32 +0000
Subject: Make it clear in the beast manual that you need to play Russian dolls
 with the  OF you download from Toshiba - it is inside an exe file which is
 inside an iso file which is inside a zip file.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23548 a1c6a512-1295-4272-9138-f99709370657
---
 manual/getting_started/gigabeats_install.tex | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

(limited to 'manual/getting_started/gigabeats_install.tex')

diff --git a/manual/getting_started/gigabeats_install.tex b/manual/getting_started/gigabeats_install.tex
index f831d8610a..2e2c98f83b 100644
--- a/manual/getting_started/gigabeats_install.tex
+++ b/manual/getting_started/gigabeats_install.tex
@@ -43,8 +43,11 @@ install the bootloader. After a short time you should see the message
 ``[INFO] Bootloader installed successfully''. Press ENTER again to exit
 beastpatcher.
 
-\item[Dual Boot.]  Extract the \playerman{} firmware file \fname{nk.bin} from
-the archive you downloaded earlier (linked above) and place it in the same
+\item[Dual Boot.]  Inside the \fname{MESV12US.zip} file you downloaded earlier
+you should find an \fname{.iso} file.  Using e.g. 7zip
+(\url{http://www.7-zip.org} you can extract an \fname{.exe} file from this
+\fname{.iso} file.  Using 7zip again, extract the \playerman{} firmware file
+\fname{nk.bin} from the \fname{.exe} file and place it in the same
 directory as \fname{beastpatcher.exe}.  Open a command prompt and navigate
 to this directory, and then type the following commands:
 
@@ -81,9 +84,12 @@ should see the message ``[INFO] Bootloader installed successfully''
 followed by some error messages that you can safely ignore. Press 
 ENTER again to exit beastpatcher and then quit the Terminal application.
 
-\item [Dual Boot.] Extract the \playerman{} firmware file \fname{nk.bin}
-from the archive you downloaded earlier (linked above) and place it in the
-same directory as \fname{beastpatcher}.  Open a terminal window and type the
+\item[Dual Boot.]  Inside the \fname{MESV12US.zip} file you downloaded earlier
+you should find an \fname{.iso} file.  Using e.g. 7zip
+(\url{http://www.7-zip.org} you can extract an \fname{.exe} file from this
+\fname{.iso} file.  Using 7zip again, extract the \playerman{} firmware file
+\fname{nk.bin} from the \fname{.exe} file and place it in the same
+directory as \fname{beastpatcher}.  Open a terminal window and type the
 following command:
 
 \begin{code} 
@@ -126,8 +132,11 @@ bootloader. After a short time you should see the message ``[INFO] Bootloader
 installed successfully'' followed by some error
 messages that you can safely ignore. Press ENTER again to exit beastpatcher.
 
-\item [Dual Boot.] Extract the \playerman{} firmware file \fname{nk.bin} from
-the archive you downloaded earlier (linked above) and place it in the same
+\item[Dual Boot.]  Inside the \fname{MESV12US.zip} file you downloaded earlier
+you should find an \fname{.iso} file.  Using e.g. 7zip
+(\url{http://www.7-zip.org} you can extract an \fname{.exe} file from this
+\fname{.iso} file.  Using 7zip again, extract the \playerman{} firmware file
+\fname{nk.bin} from the \fname{.exe} file and place it in the same
 directory as \fname{beastpatcher}.  Open a terminal window and type the
 following commands:
 
-- 
cgit v1.2.3

