From 15f1057cc021f627d8eb2cd453a1e659af1af1fc Mon Sep 17 00:00:00 2001 From: Jonathan Gordon Date: Sat, 9 Feb 2013 23:27:22 +1100 Subject: fix the eq settings in the manual Change-Id: I4fa8537f31faef0d4f6f925476dcfb8b3336113b --- manual/configure_rockbox/sound_settings.tex | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'manual/configure_rockbox') diff --git a/manual/configure_rockbox/sound_settings.tex b/manual/configure_rockbox/sound_settings.tex index 2a5f7fa31e..f06bfaf6e5 100644 --- a/manual/configure_rockbox/sound_settings.tex +++ b/manual/configure_rockbox/sound_settings.tex @@ -351,7 +351,7 @@ change to customise your listening experience. The ``Q'' parameter should always be set to 0.7 for the shelving filters. Higher values will add a small boost around the cutoff frequency that is almost always undesirable. - \item[Bands 1-3: Peaking filters.] + \item[Bands 1-8: Peaking filters.] Peaking EQ filters boost or lower a frequency range centered at the centre frequency chosen. Graphic equalizers in home stereos are usually peaking @@ -365,7 +365,7 @@ change to customise your listening experience. frequency range is. Higher Q values will affect a narrower band of frequencies, while lower Q values will affect a wider band of frequencies. - \item[Band 4: High shelf filter.] + \item[Band 9: High shelf filter.] A high shelf filter boosts or lowers all frequencies above a certain frequency limit, much as the ``treble'' control found on ordinary stereo systems does. @@ -374,7 +374,7 @@ change to customise your listening experience. than the low end. \end{description} As a general guide, EQ band 0 should be used for low frequencies, EQ bands 1 - through 3 should be used for mids, and EQ band 4 should be used for highs. + through 8 should be used for mids, and EQ band 9 should be used for highs. \begin {description} \item[Enable EQ.] -- cgit v1.2.3