From 15f1057cc021f627d8eb2cd453a1e659af1af1fc Mon Sep 17 00:00:00 2001
From: Jonathan Gordon <rockbox@jdgordon.info>
Date: Sat, 9 Feb 2013 23:27:22 +1100
Subject: fix the eq settings in the manual

Change-Id: I4fa8537f31faef0d4f6f925476dcfb8b3336113b
---
 manual/configure_rockbox/sound_settings.tex | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'manual/configure_rockbox/sound_settings.tex')

diff --git a/manual/configure_rockbox/sound_settings.tex b/manual/configure_rockbox/sound_settings.tex
index 2a5f7fa31e..f06bfaf6e5 100644
--- a/manual/configure_rockbox/sound_settings.tex
+++ b/manual/configure_rockbox/sound_settings.tex
@@ -351,7 +351,7 @@ change to customise your listening experience.
         The ``Q'' parameter should always be set to 0.7 for the shelving
         filters. Higher values will add a small boost around the cutoff
         frequency that is almost always undesirable.
-  \item[Bands 1-3: Peaking filters.]
+  \item[Bands 1-8: Peaking filters.]
         Peaking EQ filters boost or lower a frequency range centered at the
         centre frequency chosen.
         Graphic equalizers in home stereos are usually peaking
@@ -365,7 +365,7 @@ change to customise your listening experience.
         frequency range is. Higher Q values will affect a narrower band of
         frequencies, while lower Q values will affect a wider band of
         frequencies.
-  \item[Band 4: High shelf filter.]
+  \item[Band 9: High shelf filter.]
         A high shelf filter boosts or lowers all frequencies above a certain
         frequency limit, much as the ``treble'' control found on ordinary
         stereo systems does.
@@ -374,7 +374,7 @@ change to customise your listening experience.
         than the low end.
   \end{description}
   As a general guide, EQ band 0 should be used for low frequencies, EQ bands 1
-  through 3 should be used for mids, and EQ band 4 should be used for highs.
+  through 8 should be used for mids, and EQ band 9 should be used for highs.
 
 \begin {description}
   \item[Enable EQ.]
-- 
cgit v1.2.3

