From f40bfc9267b13b54e6379dfe7539447662879d24 Mon Sep 17 00:00:00 2001 From: Sean Bartell Date: Sat, 25 Jun 2011 21:32:25 -0400 Subject: Add codecs to librbcodec. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Id7f4717d51ed02d67cb9f9cb3c0ada4a81843f97 Reviewed-on: http://gerrit.rockbox.org/137 Reviewed-by: Nils Wallménius Tested-by: Nils Wallménius --- lib/rbcodec/codecs/libspeex/speex/speex_jitter.h | 197 +++++++++++++++++++++++ 1 file changed, 197 insertions(+) create mode 100644 lib/rbcodec/codecs/libspeex/speex/speex_jitter.h (limited to 'lib/rbcodec/codecs/libspeex/speex/speex_jitter.h') diff --git a/lib/rbcodec/codecs/libspeex/speex/speex_jitter.h b/lib/rbcodec/codecs/libspeex/speex/speex_jitter.h new file mode 100644 index 0000000000..03bac15636 --- /dev/null +++ b/lib/rbcodec/codecs/libspeex/speex/speex_jitter.h @@ -0,0 +1,197 @@ +/* Copyright (C) 2002 Jean-Marc Valin */ +/** + @file speex_jitter.h + @brief Adaptive jitter buffer for Speex +*/ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef SPEEX_JITTER_H +#define SPEEX_JITTER_H +/** @defgroup JitterBuffer JitterBuffer: Adaptive jitter buffer + * This is the jitter buffer that reorders UDP/RTP packets and adjusts the buffer size + * to maintain good quality and low latency. + * @{ + */ + +#include "speex_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** Generic adaptive jitter buffer state */ +struct JitterBuffer_; + +/** Generic adaptive jitter buffer state */ +typedef struct JitterBuffer_ JitterBuffer; + +/** Definition of an incoming packet */ +typedef struct _JitterBufferPacket JitterBufferPacket; + +/** Definition of an incoming packet */ +struct _JitterBufferPacket { + char *data; /**< Data bytes contained in the packet */ + spx_uint32_t len; /**< Length of the packet in bytes */ + spx_uint32_t timestamp; /**< Timestamp for the packet */ + spx_uint32_t span; /**< Time covered by the packet (same units as timestamp) */ + spx_uint16_t sequence; /**< RTP Sequence number if available (0 otherwise) */ + spx_uint32_t user_data; /**< Put whatever data you like here (it's ignored by the jitter buffer) */ +}; + +/** Packet has been retrieved */ +#define JITTER_BUFFER_OK 0 +/** Packet is lost or is late */ +#define JITTER_BUFFER_MISSING 1 +/** A "fake" packet is meant to be inserted here to increase buffering */ +#define JITTER_BUFFER_INSERTION 2 +/** There was an error in the jitter buffer */ +#define JITTER_BUFFER_INTERNAL_ERROR -1 +/** Invalid argument */ +#define JITTER_BUFFER_BAD_ARGUMENT -2 + + +/** Set minimum amount of extra buffering required (margin) */ +#define JITTER_BUFFER_SET_MARGIN 0 +/** Get minimum amount of extra buffering required (margin) */ +#define JITTER_BUFFER_GET_MARGIN 1 +/* JITTER_BUFFER_SET_AVAILABLE_COUNT wouldn't make sense */ + +/** Get the amount of available packets currently buffered */ +#define JITTER_BUFFER_GET_AVAILABLE_COUNT 3 +/** Included because of an early misspelling (will remove in next release) */ +#define JITTER_BUFFER_GET_AVALIABLE_COUNT 3 + +/** Assign a function to destroy unused packet. When setting that, the jitter + buffer no longer copies packet data. */ +#define JITTER_BUFFER_SET_DESTROY_CALLBACK 4 +/** */ +#define JITTER_BUFFER_GET_DESTROY_CALLBACK 5 + +/** Tell the jitter buffer to only adjust the delay in multiples of the step parameter provided */ +#define JITTER_BUFFER_SET_DELAY_STEP 6 +/** */ +#define JITTER_BUFFER_GET_DELAY_STEP 7 + +/** Tell the jitter buffer to only do concealment in multiples of the size parameter provided */ +#define JITTER_BUFFER_SET_CONCEALMENT_SIZE 8 +#define JITTER_BUFFER_GET_CONCEALMENT_SIZE 9 + +/** Absolute max amount of loss that can be tolerated regardless of the delay. Typical loss + should be half of that or less. */ +#define JITTER_BUFFER_SET_MAX_LATE_RATE 10 +#define JITTER_BUFFER_GET_MAX_LATE_RATE 11 + +/** Equivalent cost of one percent late packet in timestamp units */ +#define JITTER_BUFFER_SET_LATE_COST 12 +#define JITTER_BUFFER_GET_LATE_COST 13 + + +/** Initialises jitter buffer + * + * @param step_size Starting value for the size of concleanment packets and delay + adjustment steps. Can be changed at any time using JITTER_BUFFER_SET_DELAY_STEP + and JITTER_BUFFER_GET_CONCEALMENT_SIZE. + * @return Newly created jitter buffer state + */ +JitterBuffer *jitter_buffer_init(int step_size); + +/** Restores jitter buffer to its original state + * + * @param jitter Jitter buffer state + */ +void jitter_buffer_reset(JitterBuffer *jitter); + +/** Destroys jitter buffer + * + * @param jitter Jitter buffer state + */ +void jitter_buffer_destroy(JitterBuffer *jitter); + +/** Put one packet into the jitter buffer + * + * @param jitter Jitter buffer state + * @param packet Incoming packet +*/ +void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet); + +/** Get one packet from the jitter buffer + * + * @param jitter Jitter buffer state + * @param packet Returned packet + * @param desired_span Number of samples (or units) we wish to get from the buffer (no guarantee) + * @param current_timestamp Timestamp for the returned packet +*/ +int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset); + +/** Used right after jitter_buffer_get() to obtain another packet that would have the same timestamp. + * This is mainly useful for media where a single "frame" can be split into several packets. + * + * @param jitter Jitter buffer state + * @param packet Returned packet + */ +int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet); + +/** Get pointer timestamp of jitter buffer + * + * @param jitter Jitter buffer state +*/ +int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter); + +/** Advance by one tick + * + * @param jitter Jitter buffer state +*/ +void jitter_buffer_tick(JitterBuffer *jitter); + +/** Telling the jitter buffer about the remaining data in the application buffer + * @param jitter Jitter buffer state + * @param rem Amount of data buffered by the application (timestamp units) + */ +void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem); + +/** Used like the ioctl function to control the jitter buffer parameters + * + * @param jitter Jitter buffer state + * @param request ioctl-type request (one of the JITTER_BUFFER_* macros) + * @param ptr Data exchanged to-from function + * @return 0 if no error, -1 if request in unknown +*/ +int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr); + +int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset); + +/* @} */ + +#ifdef __cplusplus +} +#endif + +#endif -- cgit v1.2.3