From f9fae86de25a71e79571d8e692868be544ac1bfb Mon Sep 17 00:00:00 2001
From: Karl Kurbjun <kkurbjun@gmail.com>
Date: Mon, 4 May 2009 04:14:52 +0000
Subject: M:Robe 500: Add backlight cleanups and fix power management so that
 dangerous and shutoff voltages are taken care of, carge discharge curves are
 better modeled.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20849 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/export/config-mrobe500.h                        |  4 ++--
 .../target/arm/tms320dm320/mrobe-500/backlight-mr500.c   |  9 ++++-----
 .../target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c   | 16 ++++++++++++----
 3 files changed, 18 insertions(+), 11 deletions(-)

(limited to 'firmware')

diff --git a/firmware/export/config-mrobe500.h b/firmware/export/config-mrobe500.h
index 5a97d8ba85..f8f3502152 100644
--- a/firmware/export/config-mrobe500.h
+++ b/firmware/export/config-mrobe500.h
@@ -131,6 +131,8 @@
 
 #define HAVE_BACKLIGHT_BRIGHTNESS
 
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
 /* Main LCD backlight brightness range and defaults */
 #define MIN_BRIGHTNESS_SETTING          0
 #define MAX_BRIGHTNESS_SETTING          127
@@ -186,8 +188,6 @@
 /* Define this if you have ATA power-off control */
 #define HAVE_ATA_POWER_OFF
 
-#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
-
 /* Virtual LED (icon) */
 #define CONFIG_LED LED_VIRTUAL
 
diff --git a/firmware/target/arm/tms320dm320/mrobe-500/backlight-mr500.c b/firmware/target/arm/tms320dm320/mrobe-500/backlight-mr500.c
index 751a59da94..1596b83dc3 100644
--- a/firmware/target/arm/tms320dm320/mrobe-500/backlight-mr500.c
+++ b/firmware/target/arm/tms320dm320/mrobe-500/backlight-mr500.c
@@ -29,8 +29,6 @@
 #include "spi-target.h"
 #include "lcd-target.h"
 
-int _backlight_brightness=DEFAULT_BRIGHTNESS_SETTING;
-
 static void _backlight_write_brightness(int brightness)
 {
     uint8_t bl_command[] = {0xa4, 0x00, brightness, 0xbb};
@@ -41,7 +39,9 @@ void _backlight_on(void)
 {
     lcd_awake(); /* power on lcd + visible display */
 
-    _backlight_write_brightness(_backlight_brightness);
+#if !defined(CONFIG_BACKLIGHT_FADING)
+    _backlight_write_brightness(backlight_brightness);
+#endif
 }
 
 void _backlight_off(void)
@@ -52,7 +52,6 @@ void _backlight_off(void)
 /* Assumes that the backlight has been initialized */
 void _backlight_set_brightness(int brightness)
 {
-    _backlight_brightness=brightness;
     _backlight_write_brightness(brightness);
 }
 
@@ -65,6 +64,6 @@ void __backlight_dim(bool dim_now)
 
 bool _backlight_init(void)
 {
-    _backlight_set_brightness(_backlight_brightness);
+    _backlight_set_brightness(backlight_brightness);
     return true;
 }
diff --git a/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c b/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c
index 60949b2c18..b81c34ac3b 100755
--- a/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c
+++ b/firmware/target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c
@@ -25,29 +25,35 @@
 #include "tsc2100.h"
 #include "kernel.h"
 
+unsigned short current_bat2 = 3910;
+unsigned short current_aux = 3910;
 static unsigned short current_voltage = 3910;
 const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
 {
-    0
+    3450
 };
 
 const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
 {
-    0
+    3400
 };
 
+/* Right now these are linear translations, it would be good to model them
+ * appropriate to the actual battery curve.
+ */
+
 /* 6.10 format */
 
 /* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
 const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
 {
-    { 375, 1125, 1500, 1875, 2250, 2625, 3000, 3375, 3750, 4500, 4950 },
+    { 3400, 3300, 3600, 3700, 3800, 3900, 4000, 4100, 4200, 4300, 4400 },
 };
 
 /* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
 const unsigned short percent_to_volt_charge[11] =
 {
-    375, 1125, 1500, 1875, 2250, 2625, 3000, 3375, 3750, 4500, 4950,
+    4000, 4105, 4210, 4315, 4420, 4525, 4630, 4735, 4840, 4945, 5050,
 };
     
 /* Returns battery voltage from ADC [millivolts] */
@@ -59,6 +65,8 @@ unsigned int battery_adc_voltage(void)
     
     if(tsc2100_read_volt(&bat1, &bat2, &aux)){
         current_voltage=((short)((int)(bat1<<10)/4096*6*2.5));
+        current_bat2=((short)((int)(bat2<<10)/4096*6*2.5));
+        current_aux=((short)((int)(aux<<10)/4096*6*2.5));
     }
 
     if (TIME_BEFORE(last_tick+2*HZ, current_tick))
-- 
cgit v1.2.3