From a00bd421acc0fc11588f0494be2bb532dc93d904 Mon Sep 17 00:00:00 2001 From: William Wilgus Date: Fri, 30 Dec 2022 19:40:47 -0500 Subject: clean up button.c optimize !filter_first_keypress do a bit of cleanup in button_tick move filter_first_keypress to a function pointer Change-Id: Iefb05c1a182c1e15cfb5bca8e2ef31a710d15eba --- firmware/backlight.c | 11 +++ firmware/drivers/button.c | 210 +++++++++++++++++++++++--------------------- firmware/export/backlight.h | 4 - 3 files changed, 119 insertions(+), 106 deletions(-) (limited to 'firmware') diff --git a/firmware/backlight.c b/firmware/backlight.c index 9ee84b0ca4..9c7a16808c 100644 --- a/firmware/backlight.c +++ b/firmware/backlight.c @@ -1065,3 +1065,14 @@ void buttonlight_set_brightness(int val) { (void)val; } #endif /* HAVE_BUTTON_LIGHT */ #endif /* defined(HAVE_BACKLIGHT) && defined(BACKLIGHT_FULL_INIT) */ + +#ifndef HAVE_BUTTON_LIGHT /* Dummy Functions */ +void buttonlight_on(void) {} +void buttonlight_on_ignore(bool value, int timeout){(void)value;(void)timeout;} +void buttonlight_off(void) {} +void buttonlight_set_timeout(int value) {(void)value;} +#endif /* ndef HAVE_BUTTON_LIGHT */ + +#ifndef HAVE_BUTTONLIGHT_BRIGHTNESS /* Dummy Functions */ +void buttonlight_set_brightness(int val) { (void)val; } +#endif /* ndef HAVE_BUTTONLIGHT_BRIGHTNESS */ diff --git a/firmware/drivers/button.c b/firmware/drivers/button.c index 9979bc0155..3220f18ed7 100644 --- a/firmware/drivers/button.c +++ b/firmware/drivers/button.c @@ -51,18 +51,14 @@ static long lastbtn; /* Last valid button status */ static long last_read; /* Last button status, for debouncing/filtering */ static intptr_t button_data; /* data value from last message dequeued */ static bool flipped; /* buttons can be flipped to match the LCD flip */ -#ifdef HAVE_BACKLIGHT -static bool filter_first_keypress; + +#ifdef HAVE_BACKLIGHT /* Filter first keypress function pointer */ +static bool (*keypress_filter_fn)(int, int); #ifdef HAVE_REMOTE_LCD -static bool remote_filter_first_keypress; +static bool (*remote_keypress_filter_fn)(int, int); #endif #endif /* HAVE_BACKLIGHT */ -#ifdef HAVE_HEADPHONE_DETECTION -static bool phones_present = false; -#endif -#ifdef HAVE_LINEOUT_DETECTION -static bool lineout_present = false; -#endif + #ifdef HAVE_SW_POWEROFF static bool enable_sw_poweroff = true; #endif @@ -72,7 +68,7 @@ static bool enable_sw_poweroff = true; /* The next two make repeat "accelerate", which is nice for lists * which begin to scroll a bit faster when holding until the - * real list accerelation kicks in (this smooths acceleration). + * real list acceleration kicks in (this smooths acceleration). * * Note that touchscreen pointing events are not subject to this * acceleration and always use REPEAT_INTERVAL_TOUCH. (Do repeat @@ -86,19 +82,24 @@ static bool enable_sw_poweroff = true; /* repeat interval for touch events */ #define REPEAT_INTERVAL_TOUCH (5*HZ/100) -#ifdef HAVE_BUTTON_DATA -static int button_read(int *data); static int lastdata = 0; -#else -static int button_read(void); -#endif +static int button_read(int *data); #ifdef HAVE_TOUCHSCREEN static long last_touchscreen_touch; #endif -#if defined(HAVE_HEADPHONE_DETECTION) -static struct timeout hp_detect_timeout; /* Debouncer for headphone plug/unplug */ +static void button_remote_post(void) +{ +#if defined(HAS_SERIAL_REMOTE) && !defined(SIMULATOR) + /* Post events for the remote control */ + int btn = remote_control_rx(); + if(btn) + button_try_post(btn, 0); +#endif +} + +#if defined(HAVE_HEADPHONE_DETECTION) static int hp_detect_callback(struct timeout *tmo) { /* Try to post only transistions */ @@ -111,8 +112,6 @@ static int hp_detect_callback(struct timeout *tmo) #endif #if defined(HAVE_LINEOUT_DETECTION) -static struct timeout lo_detect_timeout; /* Debouncer for lineout plug/unplug */ - static int lo_detect_callback(struct timeout *tmo) { /* Try to post only transistions */ @@ -124,6 +123,34 @@ static int lo_detect_callback(struct timeout *tmo) } #endif +static void check_audio_peripheral_state(void) +{ +#if defined(HAVE_HEADPHONE_DETECTION) + static struct timeout hp_detect_timeout; /* Debouncer for headphone plug/unplug */ + static bool phones_present = false; + + if (headphones_inserted() != phones_present) + { + /* Use the autoresetting oneshot to debounce the detection signal */ + phones_present = !phones_present; + timeout_register(&hp_detect_timeout, hp_detect_callback, + HZ/2, phones_present); + } +#endif +#if defined(HAVE_LINEOUT_DETECTION) + static struct timeout lo_detect_timeout; /* Debouncer for lineout plug/unplug */ + static bool lineout_present = false; + + if (lineout_inserted() != lineout_present) + { + /* Use the autoresetting oneshot to debounce the detection signal */ + lineout_present = !lineout_present; + timeout_register(&lo_detect_timeout, lo_detect_callback, + HZ/2, lineout_present); + } +#endif +} + static bool button_try_post(int button, int data) { #ifdef HAVE_TOUCHSCREEN @@ -153,6 +180,43 @@ static bool button_try_post(int button, int data) return ret; } +#ifdef HAVE_BACKLIGHT +/* disabled function is shared between Main & Remote LCDs */ +static bool filter_first_keypress_disabled(int button, int data) +{ + button_try_post(button, data); + return false; +} + +static bool filter_first_keypress_enabled(int button, int data) +{ +#if defined(HAVE_TRANSFLECTIVE_LCD) && defined(HAVE_LCD_SLEEP) + if (is_backlight_on(false) && lcd_active()) +#else + if (is_backlight_on(false)) +#endif + { + return filter_first_keypress_disabled(button, data); + } + return true; +} + +#ifdef HAVE_REMOTE_LCD +static bool filter_first_remote_keypress_enabled(int button, int data) +{ + if (is_remote_backlight_on(false) +#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES) + || (remote_type()==REMOTETYPE_H300_NONLCD) +#endif + ) + { + return filter_first_keypress_disabled(button, data); + } + return true; +} +#endif /* def HAVE_REMOTE_LCD */ +#endif /* def HAVE_BACKLIGHT */ + static void button_tick(void) { static int count = 0; @@ -168,42 +232,13 @@ static void button_tick(void) #endif int diff; int btn; -#ifdef HAVE_BUTTON_DATA int data = 0; -#else - const int data = 0; -#endif -#if defined(HAS_SERIAL_REMOTE) && !defined(SIMULATOR) - /* Post events for the remote control */ - btn = remote_control_rx(); - if(btn) - button_try_post(btn, 0); -#endif + button_remote_post(); -#ifdef HAVE_BUTTON_DATA btn = button_read(&data); -#else - btn = button_read(); -#endif -#if defined(HAVE_HEADPHONE_DETECTION) - if (headphones_inserted() != phones_present) - { - /* Use the autoresetting oneshot to debounce the detection signal */ - phones_present = !phones_present; - timeout_register(&hp_detect_timeout, hp_detect_callback, - HZ/2, phones_present); - } -#endif -#if defined(HAVE_LINEOUT_DETECTION) - if (lineout_inserted() != lineout_present) - { - /* Use the autoresetting oneshot to debounce the detection signal */ - lineout_present = !lineout_present; - timeout_register(&lo_detect_timeout, lo_detect_callback, - HZ/2, lineout_present); - } -#endif + + check_audio_peripheral_state(); /* Find out if a key has been released */ diff = btn ^ lastbtn; @@ -348,48 +383,21 @@ static void button_tick(void) #ifdef HAVE_BACKLIGHT #ifdef HAVE_REMOTE_LCD if (btn & BUTTON_REMOTE) { - if (!remote_filter_first_keypress - || is_remote_backlight_on(false) -#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES) - || (remote_type()==REMOTETYPE_H300_NONLCD) -#endif - ) - button_try_post(btn, data); - else - skip_remote_release = true; + skip_remote_release = remote_keypress_filter_fn(btn, data); + remote_backlight_on(); } else #endif - if (!filter_first_keypress -#if defined(HAVE_TRANSFLECTIVE_LCD) && defined(HAVE_LCD_SLEEP) - || (is_backlight_on(false) && lcd_active()) -#else - || is_backlight_on(false) -#endif -#if BUTTON_REMOTE - || (btn & BUTTON_REMOTE) -#endif - ) - button_try_post(btn, data); - else - skip_release = true; + { + skip_release = keypress_filter_fn(btn, data); + backlight_on(); + buttonlight_on(); + } #else /* no backlight, nothing to skip */ button_try_post(btn, data); #endif post = false; } -#ifdef HAVE_REMOTE_LCD - if(btn & BUTTON_REMOTE) - remote_backlight_on(); - else -#endif - { - backlight_on(); -#ifdef HAVE_BUTTON_LIGHT - buttonlight_on(); -#endif - } - reset_poweroff_timer(); } } @@ -400,9 +408,8 @@ static void button_tick(void) } } lastbtn = btn & ~(BUTTON_REL | BUTTON_REPEAT); -#ifdef HAVE_BUTTON_DATA + lastdata = data; -#endif } #ifdef HAVE_ADJUSTABLE_CPU_FREQ @@ -515,30 +522,23 @@ intptr_t button_get_data(void) void button_init(void) { + int temp; /* Init used objects first */ queue_init(&button_queue, true); -#ifdef HAVE_BUTTON_DATA - int temp; -#endif /* hardware inits */ button_init_device(); -#ifdef HAVE_BUTTON_DATA button_read(&temp); lastbtn = button_read(&temp); -#else - button_read(); - lastbtn = button_read(); -#endif reset_poweroff_timer(); flipped = false; #ifdef HAVE_BACKLIGHT - filter_first_keypress = false; + set_backlight_filter_keypress(false); #ifdef HAVE_REMOTE_LCD - remote_filter_first_keypress = false; + set_remote_backlight_filter_keypress(false); #endif #endif #ifdef HAVE_TOUCHSCREEN @@ -649,12 +649,18 @@ void button_set_flip(bool flip) #ifdef HAVE_BACKLIGHT void set_backlight_filter_keypress(bool value) { - filter_first_keypress = value; + if (!value) + keypress_filter_fn = filter_first_keypress_disabled; + else + keypress_filter_fn = filter_first_keypress_enabled; } #ifdef HAVE_REMOTE_LCD void set_remote_backlight_filter_keypress(bool value) { - remote_filter_first_keypress = value; + if (!value) + remote_keypress_filter_fn = filter_first_keypress_disabled; + else + remote_keypress_filter_fn = filter_first_remote_keypress_enabled; } #endif #endif @@ -662,13 +668,13 @@ void set_remote_backlight_filter_keypress(bool value) /* * Get button pressed from hardware */ -#ifdef HAVE_BUTTON_DATA + static int button_read(int *data) { +#ifdef HAVE_BUTTON_DATA int btn = button_read_device(data); #else -static int button_read(void) -{ + (void) data; int btn = button_read_device(); #endif int retval; diff --git a/firmware/export/backlight.h b/firmware/export/backlight.h index 6d029790b3..f4ce5d8568 100644 --- a/firmware/export/backlight.h +++ b/firmware/export/backlight.h @@ -98,16 +98,12 @@ extern int backlight_brightness; void backlight_set_brightness(int val); #endif /* HAVE_BACKLIGHT_BRIGHTNESS */ -#ifdef HAVE_BUTTONLIGHT_BRIGHTNESS void buttonlight_set_brightness(int val); -#endif /* HAVE_BUTTONLIGHT_BRIGHTNESS */ -#ifdef HAVE_BUTTON_LIGHT void buttonlight_on_ignore(bool value, int timeout); void buttonlight_on(void); void buttonlight_off(void); void buttonlight_set_timeout(int value); -#endif /* Private API for use in target tree backlight code only */ #ifdef HAVE_BUTTON_LIGHT -- cgit v1.2.3