From 5e305d35c94199241f71a994cf6a691aec49688c Mon Sep 17 00:00:00 2001 From: Cástor Muñoz Date: Sun, 31 Jul 2016 03:00:43 +0200 Subject: Introduce new USB driver for Synopsys DesignWare USB OTG core. Based on g#844 and g#949, it is intended as a replacement for the current s3c6400x USB driver. The DesignWare USB OTG core is integrated into many SoC's, however HW core version and capabilities (mainly DMA mode, Tx FIFO mode, FIFO size and number of available IN/OUT endpoins) may differ: CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT -------- ------------- ------ --- --------- ------- ------- as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4 sansaclipv2 sansaclipzip sansafuzev2 s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5 s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7 ipodnano3g s5l8720 ipodnano4g ? ? ? ? ? Functionality supported by this driver: - Device mode, compatible with USB 1.1/2.0 hosts. - Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs. - No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode. - Concurrent transfers: control, bulk (usb_storage, usb_serial) and interrupt (usb_hid). Actually this driver is not used by any CPU, it will be enabled for each individual CPU/target in next patches. Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f --- firmware/usbstack/usb_serial.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'firmware/usbstack') diff --git a/firmware/usbstack/usb_serial.c b/firmware/usbstack/usb_serial.c index 4a80433435..e3ef4f5814 100644 --- a/firmware/usbstack/usb_serial.c +++ b/firmware/usbstack/usb_serial.c @@ -19,6 +19,7 @@ * ****************************************************************************/ #include "string.h" +#include "config.h" #include "system.h" #include "usb_core.h" #include "usb_drv.h" @@ -60,6 +61,11 @@ static unsigned char send_buffer[BUFFER_SIZE] USB_DEVBSS_ATTR __attribute__((aligned(32))); static unsigned char receive_buffer[32] USB_DEVBSS_ATTR __attribute__((aligned(32))); +#if CONFIG_USBOTG == USBOTG_DESIGNWARE +/* Aligned transit buffer */ +static unsigned char transit_buffer[32] + USB_DEVBSS_ATTR __attribute__((aligned(4))); +#endif static void sendout(void); @@ -163,8 +169,13 @@ static void sendout(void) if(buffer_transitlength > 0) { buffer_length -= buffer_transitlength; +#if CONFIG_USBOTG == USBOTG_DESIGNWARE + memcpy(transit_buffer,&send_buffer[buffer_start],buffer_transitlength); + usb_drv_send_nonblocking(ep_in,transit_buffer,buffer_transitlength); +#else usb_drv_send_nonblocking(ep_in, &send_buffer[buffer_start], buffer_transitlength); +#endif } } -- cgit v1.2.3