From 775ab07d5e710c4811a66b246f8f8708a09eba28 Mon Sep 17 00:00:00 2001 From: Amaury Pouly Date: Fri, 7 Dec 2012 13:37:26 +0100 Subject: usb: add support for hardware handled SET ADDR/CONFIG Some USB controllers like the one of the Rockchip 27xx handle some requests in pure hardware. This is especially a problem for two of them: - SET ADDR which is used by our core to track the DEFAULT/ADDRESS state and is required for the drivers to work properly - SET CONFIG which is used by our core to initialise the drivers by calling init_connection() In these cases we need a way to notify the core that such requests happened. We do this by exporting two functions which directly notify the core about these requests and perform the necessary init steps required without doing the actual USB transfers. Special care is needed because these functions could be called from an interrupt handler. For this reason we still use the usb_queue and introduce new IDs so that they are processed in order and safely. No functional change is intended, both in the usbstack and on targets without such quirks. Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140 --- firmware/usb.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'firmware/usb.c') diff --git a/firmware/usb.c b/firmware/usb.c index 6823851e08..b8c9822ff6 100644 --- a/firmware/usb.c +++ b/firmware/usb.c @@ -270,6 +270,11 @@ void usb_signal_transfer_completion( queue_post(&usb_queue, USB_TRANSFER_COMPLETION, (intptr_t)event_data); } +void usb_signal_notify(long id, intptr_t data) +{ + queue_post(&usb_queue, id, data); +} + #else /* !HAVE_USBSTACK */ static inline void usb_stack_enable(bool enable) @@ -431,6 +436,12 @@ static void NORETURN_ATTR usb_thread(void) /*** Main USB thread duties ***/ #ifdef HAVE_USBSTACK + case USB_NOTIFY_SET_ADDR: + case USB_NOTIFY_SET_CONFIG: + if(usb_state <= USB_EXTRACTED) + break; + usb_core_handle_notify(ev.id, ev.data); + break; case USB_TRANSFER_COMPLETION: if(usb_state <= USB_EXTRACTED) break; -- cgit v1.2.3