From 84f04a57eee2480100ab533b97665fec7f1da83f Mon Sep 17 00:00:00 2001 From: Jack Halpin Date: Wed, 25 Nov 2009 03:24:28 +0000 Subject: AMS Sansa: For consistency, replace references to SECTOR_SIZE with SD_BLOCK_SIZE which is defined in sd.h as 512 bytes. We had 3 different references to the same value. Rockbox always uses a blocksize of 512 bytes for SD and we were using SECTOR_SIZE, SD_BLOCK_SIZE, & card_info[drive].blocksize to use this value. Now the only reference being used is SD_BLOCK_SIZE. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23746 a1c6a512-1295-4272-9138-f99709370657 --- firmware/target/arm/as3525/ata_sd_as3525.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'firmware/target') diff --git a/firmware/target/arm/as3525/ata_sd_as3525.c b/firmware/target/arm/as3525/ata_sd_as3525.c index e71c886021..fdb39f34c2 100644 --- a/firmware/target/arm/as3525/ata_sd_as3525.c +++ b/firmware/target/arm/as3525/ata_sd_as3525.c @@ -98,7 +98,7 @@ static int sd_wait_for_state(const int drive, unsigned int state); static int sd_select_bank(signed char bank); static int sd_init_card(const int drive); static void init_pl180_controller(const int drive); -#define SECTOR_SIZE 512 /* XXX: different sector sizes ? */ + #define BLOCKS_PER_BANK 0x7a7800 static tCardInfo card_info[NUM_DRIVES]; @@ -126,7 +126,7 @@ static volatile unsigned int transfer_error[NUM_VOLUMES]; #define PL180_MAX_TRANSFER_ERRORS 10 #define UNALIGNED_NUM_SECTORS 10 -static unsigned char aligned_buffer[UNALIGNED_NUM_SECTORS* SECTOR_SIZE] __attribute__((aligned(32))); /* align on cache line size */ +static unsigned char aligned_buffer[UNALIGNED_NUM_SECTORS* SD_BLOCK_SIZE] __attribute__((aligned(32))); /* align on cache line size */ static unsigned char *uncached_buffer = UNCACHED_ADDR(&aligned_buffer[0]); static inline void mci_delay(void) @@ -691,7 +691,7 @@ static int sd_transfer_sectors(IF_MD2(int drive,) unsigned long start, if(transfer > UNALIGNED_NUM_SECTORS) transfer = UNALIGNED_NUM_SECTORS; if(write) - memcpy(uncached_buffer, buf, transfer * SECTOR_SIZE); + memcpy(uncached_buffer, buf, transfer * SD_BLOCK_SIZE); /* Set bank_start to the correct unit (blocks or bytes) */ if(!(card_info[drive].ocr & (1<<30))) /* not SDHC */ @@ -724,7 +724,7 @@ static int sd_transfer_sectors(IF_MD2(int drive,) unsigned long start, * Note : the OF doesn't seem to use them anyway */ MCI_DATA_TIMER(drive) = write ? SD_MAX_WRITE_TIMEOUT : SD_MAX_READ_TIMEOUT; - MCI_DATA_LENGTH(drive) = transfer * card_info[drive].blocksize; + MCI_DATA_LENGTH(drive) = transfer * SD_BLOCK_SIZE; MCI_DATA_CTRL(drive) = (1<<0) /* enable */ | (!write<<1) /* transfer direction */ | (1<<3) /* DMA */ | @@ -739,8 +739,8 @@ static int sd_transfer_sectors(IF_MD2(int drive,) unsigned long start, if(!transfer_error[drive]) { if(!write) - memcpy(buf, uncached_buffer, transfer * SECTOR_SIZE); - buf += transfer * SECTOR_SIZE; + memcpy(buf, uncached_buffer, transfer * SD_BLOCK_SIZE); + buf += transfer * SD_BLOCK_SIZE; start += transfer; count -= transfer; loops = 0; /* reset errors counter */ -- cgit v1.2.3