From 476e464901dda57b51080a3ca373863bbd72da05 Mon Sep 17 00:00:00 2001
From: Maurus Cuelenaere <mcuelenaere@gmail.com>
Date: Fri, 21 Jan 2011 12:38:03 +0000
Subject: Fix Onda VX747+ LCD not working on boot

Same fix as in r29083.

Flyspray: FS#11896
Author: Purling Nayuki

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29102 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'firmware/target')

diff --git a/firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c b/firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
index 56c8504649..192b4409fb 100644
--- a/firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
+++ b/firmware/target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
@@ -39,10 +39,11 @@ do {                                    \
 #define SLEEP(x) { register int __i; for(__i=0; __i<x; __i++) asm volatile("nop\n nop\n"); }
 #define DELAY    SLEEP(700000);
 
-#if (defined(ONDA_VX777) && !defined(BOOTLOADER)) || defined(USB_BOOT)
+#if (defined((ONDA_VX777) || (ONDA_VX747P)) && !defined(BOOTLOADER)) \
+    || defined(USB_BOOT)
  /*
-  * Onda VX777 needs this in order to boot correctly, it looks like the SPL
-  * does not correctly initialize the LCD for Rockbox to switch it on.
+  * Onda VX777/VX747+ needs this in order to boot correctly, it looks like the
+  * SPL does not correctly initialize the LCD for Rockbox to switch it on.
   */
  #define RESET_LCD
 #endif
-- 
cgit v1.2.3