From 0e6dd7efcd21d48665b5a799fe081a75cdcb960f Mon Sep 17 00:00:00 2001 From: Jens Arnold Date: Mon, 27 Nov 2006 02:16:32 +0000 Subject: Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657 --- .../target/sh/archos/recorder/button-recorder.c | 108 +++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100755 firmware/target/sh/archos/recorder/button-recorder.c (limited to 'firmware/target/sh/archos/recorder/button-recorder.c') diff --git a/firmware/target/sh/archos/recorder/button-recorder.c b/firmware/target/sh/archos/recorder/button-recorder.c new file mode 100755 index 0000000000..dc43cce0e0 --- /dev/null +++ b/firmware/target/sh/archos/recorder/button-recorder.c @@ -0,0 +1,108 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2006 by Jens Arnold + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "config.h" +#include "system.h" +#include "button.h" +#include "backlight.h" +#include "adc.h" + +/* + Recorder hardware button hookup + =============================== + + F1, F2, F3, UP: connected to AN4 through a resistor network + DOWN, PLAY, LEFT, RIGHT: likewise connected to AN5 + + The voltage on AN4/ AN5 depends on which keys (or key combo) is pressed + + ON: PB8, low active + OFF: PB4, low active +*/ + +void button_init_device(void) +{ + /* Set PB4 and PB8 as input pins */ + PBCR1 &= 0xfffc; /* PB8MD = 00 */ + PBCR2 &= 0xfcff; /* PB4MD = 00 */ + PBIOR &= ~0x0110; /* Inputs */ +} + +int button_read_device(void) +{ + int btn = BUTTON_NONE; + int data; + static int off_button_count = 0; + + /* check F1..F3 and UP */ + data = adc_read(ADC_BUTTON_ROW1); + if (data >= 250) + { + if (data >= 700) + if (data >= 900) + btn = BUTTON_F3; + else + btn = BUTTON_UP; + else + if (data >= 500) + btn = BUTTON_F2; + else + btn = BUTTON_F1; + } + + /* Some units have mushy keypads, so pressing UP also activates + the Left/Right buttons. Let's combat that by skipping the AN5 + checks when UP is pressed. */ + if(!(btn & BUTTON_UP)) + { + /* check DOWN, PLAY, LEFT, RIGHT */ + data = adc_read(ADC_BUTTON_ROW2); + if (data >= 250) + { + if (data >= 700) + if (data >= 900) + btn |= BUTTON_DOWN; + else + btn |= BUTTON_PLAY; + else + if (data >= 500) + btn |= BUTTON_LEFT; + else + btn |= BUTTON_RIGHT; + } + } + + /* check port B pins for ON and OFF */ + data = PBDR; + if ((data & 0x0100) == 0) + btn |= BUTTON_ON; + + if ((data & 0x0010) == 0) + { + /* When the batteries are low, the low-battery shutdown logic causes + * spurious OFF events due to voltage fluctuation on some units. + * Only accept OFF when read several times in sequence. */ + if (++off_button_count > 3) + btn |= BUTTON_OFF; + } + else + off_button_count = 0; + + return btn; +} -- cgit v1.2.3