From 66519000f47cfb5c58be68ab2335b7cbc0bce35b Mon Sep 17 00:00:00 2001 From: Dana Conrad Date: Sun, 22 Jan 2023 12:33:15 -0600 Subject: ErosQNative: Enable Line Out capabilities on new revision players The newer players have some changed hardware, but most importantly the line out now appears to be routed through the stereo switch instead of being hardwired directly off the DAC. Disable muting the headphone amp, enable switching the stereo switch, and rename some of the GPIOs to be more generic since the DAC, headphone amp, and stereo switch all appear to have changed. Change-Id: I220fe5e37bcbcd959b544183e1fcf70673a83c13 --- .../mips/ingenic_x1000/erosqnative/gpio-target.h | 26 +++++++++++----------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h') diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h index 376eae136e..3318a39786 100644 --- a/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h +++ b/firmware/target/mips/ingenic_x1000/erosqnative/gpio-target.h @@ -24,26 +24,26 @@ DEFINE_PINGROUP(I2S, GPIO_B, 0x1f << 0, GPIOF_DEVICE(1)) DEFINE_PINGROUP(I2C2, GPIO_D, 3 << 0, GPIOF_DEVICE(1)) /* Name Pin Function */ -/* mute DAC - 0 - mute, 1 - play. Affects both HP and LO. */ -DEFINE_GPIO(PCM5102A_XMIT, GPIO_PB(12), GPIOF_OUTPUT(0)) +/* mute DAC: 0 - mute, 1 - play */ +DEFINE_GPIO(DAC_XMIT, GPIO_PB(12), GPIOF_OUTPUT(0)) -/* mute HP amp, no effect on LO. 0 - mute, 1 - play */ -DEFINE_GPIO(MAX97220_SHDN, GPIO_PB(8), GPIOF_OUTPUT(0)) +/* mute HP amp: 0 - mute, 1 - play */ +DEFINE_GPIO(HPAMP_SHDN, GPIO_PB(8), GPIOF_OUTPUT(0)) -/* mute audio mux, only affects Headphone out. - * 0 - play, 1 - mute */ -DEFINE_GPIO(ISL54405_MUTE, GPIO_PB(15), GPIOF_OUTPUT(1)) +/* mute audio mux: 0 - play, 1 - mute */ +DEFINE_GPIO(STEREOSW_MUTE, GPIO_PB(15), GPIOF_OUTPUT(1)) -/* switches HP on/off - 0 HP on, 1 hp off, has no effect on LO. - * As best I can tell, it switches HP Out sources between HP amp and something - * not implemented - there seem to be resistors missing. */ -DEFINE_GPIO(ISL54405_SEL, GPIO_PB(5), GPIOF_OUTPUT(0)) +/* + * Original devices: switches HP on/off - 0 HP on, 1 HP off, no effect on LO. + * Newer devices: switches between HP and LO - 0 HP, 1 LO. + */ +DEFINE_GPIO(STEREOSW_SEL, GPIO_PB(5), GPIOF_OUTPUT(0)) /* DAC AVDD */ -DEFINE_GPIO(PCM5102A_ANALOG_PWR, GPIO_PB(9), GPIOF_OUTPUT(0)) +DEFINE_GPIO(DAC_ANALOG_PWR, GPIO_PB(9), GPIOF_OUTPUT(0)) /* Headphone Amp power */ -DEFINE_GPIO(MAX97220_POWER, GPIO_PB(6), GPIOF_OUTPUT(0)) +DEFINE_GPIO(HPAMP_POWER, GPIO_PB(6), GPIOF_OUTPUT(0)) /* SD card */ DEFINE_GPIO(MSC0_CD, GPIO_PB(11), GPIOF_INPUT) -- cgit v1.2.3