From 3e7a09cb0dee0ee04b5c77f427bf89d990ec8d0b Mon Sep 17 00:00:00 2001
From: Dana Conrad <dconrad@fastmail.com>
Date: Sat, 26 Jun 2021 12:07:11 -0500
Subject: New Port: Eros Q Native

What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
   LO volume will only be put to user-defined max volume
   if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot

What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
   (sometimes it's completely silent, sometimes there's
    a click)
- Audio uses 16-bit volume scaling, so clicking/popping
   is pretty bad at lower volumes - need 32 bit volume
   scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support

Unknowns:
- Stereo Switch pins: Direction select, AC_DC
   (probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?

"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth

Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
---
 .../mips/ingenic_x1000/erosqnative/button-target.h | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 firmware/target/mips/ingenic_x1000/erosqnative/button-target.h

(limited to 'firmware/target/mips/ingenic_x1000/erosqnative/button-target.h')

diff --git a/firmware/target/mips/ingenic_x1000/erosqnative/button-target.h b/firmware/target/mips/ingenic_x1000/erosqnative/button-target.h
new file mode 100644
index 0000000000..9c39a40296
--- /dev/null
+++ b/firmware/target/mips/ingenic_x1000/erosqnative/button-target.h
@@ -0,0 +1,45 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ *
+ * Copyright (C) 2021 Solomon Peachy, Dana Conrad
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+/* Main unit's buttons */
+#define BUTTON_POWER       0x00000001
+#define BUTTON_MENU        0x00000002
+#define BUTTON_BACK        0x00000004
+#define BUTTON_PLAY        0x00000008
+#define BUTTON_NEXT        0x00000010
+#define BUTTON_PREV        0x00000020
+#define BUTTON_VOL_UP      0x00000040
+#define BUTTON_VOL_DOWN    0x00000080
+#define BUTTON_SCROLL_BACK 0x00000100
+#define BUTTON_SCROLL_FWD  0x00000200
+
+#define BUTTON_MAIN  (BUTTON_POWER | BUTTON_MENU | BUTTON_BACK | BUTTON_PREV | \
+                      BUTTON_NEXT | BUTTON_PLAY | BUTTON_VOL_UP | BUTTON_VOL_DOWN | BUTTON_SCROLL_BACK | BUTTON_SCROLL_FWD)
+
+#define BUTTON_LEFT BUTTON_PREV
+#define BUTTON_RIGHT BUTTON_NEXT
+
+/* Software power-off */
+#define POWEROFF_BUTTON BUTTON_POWER
+#define POWEROFF_COUNT  25
+
+#endif /* _BUTTON_TARGET_H_ */
-- 
cgit v1.2.3