From 3e7a09cb0dee0ee04b5c77f427bf89d990ec8d0b Mon Sep 17 00:00:00 2001 From: Dana Conrad Date: Sat, 26 Jun 2021 12:07:11 -0500 Subject: New Port: Eros Q Native What works: - LCD: 16-bit RGB565 - all buttons, including scrollwheel - SD Card - Battery level and charging/not charging status - USB - audio - sample rate switching - HP / LO detect, with "safe" fixed LO volume - LO volume will only be put to user-defined max volume if headphones are not present. - rtc - Plugins build, tried a couple and they seem OK - Bootloader, installable to nand via usbboot What doesn't work: - Dual Boot - power on/off has intermittent, low volume audio click (sometimes it's completely silent, sometimes there's a click) - Audio uses 16-bit volume scaling, so clicking/popping is pretty bad at lower volumes - need 32 bit volume scaling, 24 bit I2S data - USB HID keys not yet defined - no jztool support Unknowns: - Stereo Switch pins: Direction select, AC_DC (probably not even hooked up) - What is the actual purpose of the Stereo Swtich? - How does the bluetooth module connect? "Someday" stuff: - get LCD working at higher bit depth - Bluetooth Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33 --- firmware/target/mips/ingenic_x1000/clk-x1000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'firmware/target/mips/ingenic_x1000/clk-x1000.c') diff --git a/firmware/target/mips/ingenic_x1000/clk-x1000.c b/firmware/target/mips/ingenic_x1000/clk-x1000.c index 7e254401fb..4988e7c3bf 100644 --- a/firmware/target/mips/ingenic_x1000/clk-x1000.c +++ b/firmware/target/mips/ingenic_x1000/clk-x1000.c @@ -265,7 +265,7 @@ void clk_init(void) jz_writef(CPM_APCR, BS(1), PLLM(42 - 1), PLLN(0), PLLOD(0), ENABLE(1)); while(jz_readf(CPM_APCR, ON) == 0); -#if defined(FIIO_M3K) +#if (defined(FIIO_M3K) || defined(EROS_QN)) /* TODO: Allow targets to define their clock frequencies in their config, * instead of having this be a random special case. */ if(get_boot_option() == BOOT_OPTION_ROCKBOX) { @@ -296,7 +296,7 @@ void clk_init(void) CLKMUX_CPU(SCLK_A) | CLKMUX_AHB0(MPLL) | CLKMUX_AHB2(MPLL)); -#if defined(FIIO_M3K) +#if (defined(FIIO_M3K) || defined(EROS_QN)) } #endif -- cgit v1.2.3