From 1511d75f9d965cba0e1ef9d2fddb94149196638c Mon Sep 17 00:00:00 2001
From: Robert Kukla <roolku@rockbox.org>
Date: Tue, 24 Nov 2009 15:42:54 +0000
Subject: Tatung Elio: a few more buttons identified

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23737 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/target/arm/tatung/tpj1022/button-target.h | 45 +++++++++--------
 .../target/arm/tatung/tpj1022/button-tpj1022.c     | 56 +++++-----------------
 2 files changed, 33 insertions(+), 68 deletions(-)

(limited to 'firmware/target/arm')

diff --git a/firmware/target/arm/tatung/tpj1022/button-target.h b/firmware/target/arm/tatung/tpj1022/button-target.h
index c7afa59070..979cf88936 100644
--- a/firmware/target/arm/tatung/tpj1022/button-target.h
+++ b/firmware/target/arm/tatung/tpj1022/button-target.h
@@ -7,7 +7,7 @@
  *                     \/            \/     \/    \/            \/
  * $Id$
  *
- * Copyright (C) 2006 by Barry Wardell
+ * Copyright (C) 2006 by Robert Kukla
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -22,34 +22,33 @@
 #ifndef _BUTTON_TARGET_H_
 #define _BUTTON_TARGET_H_
 
-#include <stdbool.h>
-#include "config.h"
-
 #define HAS_BUTTON_HOLD
 
+#define button_init_device()
+
 bool button_hold(void);
-void button_init_device(void);
 int button_read_device(void);
 
-/* Tatung Elio TPJ-1022 button codes */
-
 /* Main unit's buttons */
-#define BUTTON_POWER        0x00000001
-
-#define BUTTON_LEFT         0x00000002
-#define BUTTON_RIGHT        0x00000004
-#define BUTTON_UP           0x00000008
-#define BUTTON_DOWN         0x00000010
-
-#define BUTTON_MENU         0x00000020
-#define BUTTON_FF           0x00000040
-#define BUTTON_REW          0x00000080
-#define BUTTON_REC          0x00000100
-#define BUTTON_AB           0x00000200
-#define BUTTON_PLUS         0x00000400
-#define BUTTON_MINUS        0x00000800
-
-#define BUTTON_MAIN         0x00000fff
+
+#define BUTTON_VOL_DOWN     0x00000001
+
+/* bit position in GPIOA */
+#define BUTTON_REW          0x00000002
+#define BUTTON_FF           0x00000004
+#define BUTTON_POWER        0x00000008
+#define BUTTON_UP           0x00000010
+#define BUTTON_DOWN         0x00000020
+#define BUTTON_AB           0x00000040
+#define BUTTON_RIGHT        0x00000080
+
+/* still unknown */
+#define BUTTON_MENU         0x00000100
+#define BUTTON_REC          0x00000200
+#define BUTTON_VOL_UP       0x00000400
+#define BUTTON_LEFT         0x00000800
+
+#define BUTTON_MAIN         0x00000FFF
 
 /* No Remote control */
 #define BUTTON_REMOTE 0
diff --git a/firmware/target/arm/tatung/tpj1022/button-tpj1022.c b/firmware/target/arm/tatung/tpj1022/button-tpj1022.c
index 6cdca5b35d..ce9d7ab24d 100644
--- a/firmware/target/arm/tatung/tpj1022/button-tpj1022.c
+++ b/firmware/target/arm/tatung/tpj1022/button-tpj1022.c
@@ -7,7 +7,7 @@
  *                     \/            \/     \/    \/            \/
  * $Id$
  *
- * Copyright (C) 2006 by Barry Wardell
+ * Copyright (C) 2006 by Robert Kukla
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -19,64 +19,30 @@
  *
  ****************************************************************************/
 
-/* Custom written for the TPJ-1022 based on analysis of the GPIO data */
-
-#include <stdlib.h>
-#include "config.h"
-#include "cpu.h"
 #include "system.h"
 #include "button.h"
-#include "kernel.h"
-#include "backlight.h"
-
-void button_init_device(void)
-{
-    /* No hardware initialisation required as it is done by the bootloader */
-}
 
 bool button_hold(void)
 {
-  return false;
+    return (GPIOK_INPUT_VAL & 0x40) ?  true : false; 
 }
 
-/*
- * Get button pressed from hardware
- */
 int button_read_device(void)
 {
     int btn = BUTTON_NONE;
-    unsigned char state;
-    static bool hold_button = false;
 
-#if 0
-    /* light handling */
-    if (hold_button && !button_hold())
+    if (!button_hold())
     {
-        backlight_on();
-    }
-#endif
+        btn = (GPIOA_INPUT_VAL & 0xfe) ^ 0xfe;
 
-    hold_button = button_hold();
-    if (!hold_button)
-    {
-        /* Read normal buttons */
-        state = GPIOA_INPUT_VAL;
-        if ((state & 0x2) == 0) btn |= BUTTON_REW;
-        if ((state & 0x4) == 0) btn |= BUTTON_FF;
-        if ((state & 0x80) == 0) btn |= BUTTON_RIGHT;
+        if ((GPIOK_INPUT_VAL & 0x20) == 0) btn |= BUTTON_VOL_DOWN;
 
-        /* Buttons left to figure out:
-           button_hold()
-           BUTTON_POWER
-           BUTTON_LEFT
-           BUTTON_UP
-           BUTTON_DOWN
-           BUTTON_MENU
-           BUTTON_REC  
-           BUTTON_AB
-           BUTTON_PLUS
-           BUTTON_MINUS
-        */
+        /* to be found
+        if ((GPIO?_INPUT_VAL & 0x??) == 0) btn |= BUTTON_MENU;
+        if ((GPIO?_INPUT_VAL & 0x??) == 0) btn |= BUTTON_REC;
+        if ((GPIO?_INPUT_VAL & 0x??) == 0) btn |= BUTTON_VOL_UP;
+        if ((GPIO?_INPUT_VAL & 0x??) == 0) btn |= BUTTON_LEFT;
+         */  
     }
     
     return btn;
-- 
cgit v1.2.3