From 4fa96fbc914ae8fd69aedafd73f4f1798679d29f Mon Sep 17 00:00:00 2001 From: Karl Kurbjun Date: Wed, 1 Apr 2009 03:21:18 +0000 Subject: M:Robe 500i: More LCD initialization, and beginnings of support for QVGA as well as VGA on the LCD. MPEGPlayer now works with reasonable performance on smaller videos, but YUV blitting persists after MPEGPlayer is left, some cleanup/changes to the initialization code. This should be functionally equivalent for the ZVM, but the #ifdef's may need to be added back for app.lds. Get the bootloader building again. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20598 a1c6a512-1295-4272-9138-f99709370657 --- .../target/arm/tms320dm320/mrobe-500/lcd-mr500.c | 145 +++++++++++++++++---- 1 file changed, 117 insertions(+), 28 deletions(-) (limited to 'firmware/target/arm/tms320dm320/mrobe-500/lcd-mr500.c') diff --git a/firmware/target/arm/tms320dm320/mrobe-500/lcd-mr500.c b/firmware/target/arm/tms320dm320/mrobe-500/lcd-mr500.c index 1126f35149..0357b469d9 100644 --- a/firmware/target/arm/tms320dm320/mrobe-500/lcd-mr500.c +++ b/firmware/target/arm/tms320dm320/mrobe-500/lcd-mr500.c @@ -43,7 +43,6 @@ static bool lcd_on = true; static bool lcd_powered = true; #endif -volatile bool lcd_poweroff = false; /* ** These are imported from lcd-16bit.c */ @@ -65,6 +64,14 @@ void lcd_sleep() /* "not powered" implies "disabled" */ if (lcd_on) lcd_enable(false); + + /* Disabling these saves another ~15mA */ + IO_OSD_OSDWINMD0&=~(0x01); + IO_VID_ENC_VMOD&=~(0x01); + + sleep(HZ/5); + + /* Disabling the LCD saves ~50mA */ IO_GIO_BITCLR2=1<<4; lcd_powered=false; } @@ -83,6 +90,11 @@ void lcd_enable(bool state) if (!lcd_powered) { lcd_powered=true; + + IO_OSD_OSDWINMD0|=0x01; + IO_VID_ENC_VMOD|=0x01; + + sleep(2); IO_GIO_BITSET2=1<<4; /* Wait long enough for a frame to be written - yes, it * takes awhile. */ @@ -110,6 +122,41 @@ void lcd_init_device(void) /* Clear the Frame */ memset16(FRAME, 0x0000, LCD_WIDTH*LCD_HEIGHT); + /* Setup the LCD controller */ + IO_VID_ENC_VMOD=0x2015; + IO_VID_ENC_VDCTL=0x2000; + IO_VID_ENC_VDPRO=0x0000; + IO_VID_ENC_SYNCTL=0x100E; + IO_VID_ENC_HSPLS=1; /* HSYNC pulse width */ + IO_VID_ENC_VSPLS=1; /* VSYNC pulse width */ + + /* These calculations support 640x480 and 320x240 */ + IO_VID_ENC_HINT=NATIVE_MAX_WIDTH+NATIVE_MAX_WIDTH/3; + IO_VID_ENC_HSTART=NATIVE_MAX_WIDTH/6; /* Front porch */ + IO_VID_ENC_HVALID=NATIVE_MAX_WIDTH; /* Data valid */ + IO_VID_ENC_VINT=NATIVE_MAX_HEIGHT+7; + IO_VID_ENC_VSTART=3; + IO_VID_ENC_VVALID=NATIVE_MAX_HEIGHT; + + IO_VID_ENC_HSDLY=0x0000; + IO_VID_ENC_VSDLY=0x0000; + IO_VID_ENC_YCCTL=0x0000; + IO_VID_ENC_RGBCTL=0x0000; + IO_VID_ENC_RGBCLP=0xFF00; + IO_VID_ENC_LNECTL=0x0000; + IO_VID_ENC_CULLLNE=0x0000; + IO_VID_ENC_LCDOUT=0x0000; + IO_VID_ENC_BRTS=0x0000; + IO_VID_ENC_BRTW=0x0000; + IO_VID_ENC_ACCTL=0x0000; + IO_VID_ENC_PWMP=0x0000; + IO_VID_ENC_PWMW=0x0000; + + IO_VID_ENC_DCLKCTL=0x0800; + IO_VID_ENC_DCLKPTN0=0x0001; + + + /* Setup the display */ IO_OSD_MODE=0x00ff; IO_OSD_VIDWINMD=0x0002; IO_OSD_OSDWINMD0=0x2001; @@ -117,21 +164,34 @@ void lcd_init_device(void) IO_OSD_ATRMD=0x0000; IO_OSD_RECTCUR=0x0000; - IO_OSD_OSDWIN0OFST=(480*2) / 32; + IO_OSD_OSDWIN0OFST=(NATIVE_MAX_WIDTH*2) / 32; + addr = ((int)FRAME-CONFIG_SDRAM_START) / 32; IO_OSD_OSDWINADH=addr >> 16; IO_OSD_OSDWIN0ADL=addr & 0xFFFF; + + IO_OSD_VIDWINADH=addr >> 16; + IO_OSD_VIDWIN0ADL=addr & 0xFFFF; - IO_OSD_BASEPX=80; - IO_OSD_BASEPY=2; + IO_OSD_BASEPX=IO_VID_ENC_HSTART; + IO_OSD_BASEPY=IO_VID_ENC_VSTART; IO_OSD_OSDWIN0XP=0; IO_OSD_OSDWIN0YP=0; - IO_OSD_OSDWIN0XL=480; - IO_OSD_OSDWIN0YL=640; + + IO_OSD_OSDWIN0XL=NATIVE_MAX_WIDTH; + IO_OSD_OSDWIN0YL=NATIVE_MAX_HEIGHT; + + /* Set pin 36 and 35 (LCD POWER and LCD RESOLUTION) to an output */ + IO_GIO_DIR2&=!(3<<3); - /* Set pin 36 to an output */ - IO_GIO_DIR2&=!(1<<4); +#if NATIVE_MAX_HEIGHT > 320 + /* Set LCD resolution to VGA */ + IO_GIO_BITSET2=1<<3; +#else + /* Set LCD resolution to QVGA */ + IO_GIO_BITCLR2=1<<3; +#endif } /* Update a fraction of the display. */ @@ -204,50 +264,79 @@ void lcd_update(void) #endif } -/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */ -extern void lcd_write_yuv420_lines(fb_data *dst, - unsigned char chroma_buf[LCD_HEIGHT/2*3], - unsigned char const * const src[3], - int width, - int stride); +void lcd_blit_yuv(unsigned char * const src[3], + int src_x, int src_y, int stride, + int x, int y, int width, + int height) __attribute__ ((section(".icode"))); + /* Performance function to blit a YUV bitmap directly to the LCD */ -/* For the Gigabeat - show it rotated */ -/* So the LCD_WIDTH is now the height */ +/* Show it rotated so the LCD_WIDTH is now the height */ void lcd_blit_yuv(unsigned char * const src[3], int src_x, int src_y, int stride, int x, int y, int width, int height) { /* Caches for chroma data so it only need be recaculated every other line */ - unsigned char chroma_buf[LCD_HEIGHT/2*3]; /* 480 bytes */ unsigned char const * yuv_src[3]; off_t z; + /* Turn off the RGB buffer and enable the YUV buffer */ + IO_OSD_OSDWINMD0&=~(0x01); + IO_OSD_VIDWINMD|=0x01; + if (!lcd_on) return; + + /* y has to be at multiple of 2 or else it will mess up the HW (interleaving) */ + y &= ~1; /* Sorry, but width and height must be >= 2 or else */ width &= ~1; - height >>= 1; + height>>=1; - fb_data *dst = (fb_data*)FRAME + x * LCD_WIDTH + (LCD_WIDTH - y) - 1; + fb_data *dst = (fb_data*)FRAME + LCD_WIDTH*LCD_HEIGHT - x * LCD_WIDTH + y; z = stride*src_y; yuv_src[0] = src[0] + z + src_x; yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1); yuv_src[2] = src[2] + (yuv_src[1] - src[1]); - do { - lcd_write_yuv420_lines(dst, chroma_buf, yuv_src, width, - stride); - - yuv_src[0] += stride << 1; /* Skip down two luma lines */ - yuv_src[1] += stride >> 1; /* Skip down one chroma line */ - yuv_src[2] += stride >> 1; - dst -= 2; + do + { + register fb_data *c_dst=dst; + register int c_width=width; + unsigned char const * c_yuv_src[3]; + c_yuv_src[0] = yuv_src[0]; + c_yuv_src[1] = yuv_src[1]; + c_yuv_src[2] = yuv_src[2]; + + do + { + /* This needs to be done in a block of 4 pixels */ + *c_dst=*c_yuv_src[0]<<8 | *c_yuv_src[1]; + *(c_dst+1)=*(c_yuv_src[0]+stride)<<8 | *c_yuv_src[2]; + c_dst-=LCD_WIDTH; + c_yuv_src[0]++; + *c_dst=*c_yuv_src[0]<<8 | *c_yuv_src[1]; + *(c_dst+1)=*(c_yuv_src[0]+stride)<<8 | *c_yuv_src[2]; + c_dst-=LCD_WIDTH; + c_yuv_src[0]++; + + c_yuv_src[1]++; + c_yuv_src[2]++; + + c_width -= 2; + } + while (c_width > 0); + + yuv_src[0] += stride << 1; /* Skip down two luma lines */ + yuv_src[1] += stride >> 1; /* Skip down one chroma line */ + yuv_src[2] += stride >> 1; + dst+=2; + } + while (--height > 0); } - while (--height > 0); } void lcd_set_contrast(int val) { -- cgit v1.2.3