From bbb789120ce4c2eb470233920e602e5f79c62430 Mon Sep 17 00:00:00 2001
From: Amaury Pouly <amaury.pouly@gmail.com>
Date: Tue, 18 Jun 2013 16:24:28 +0200
Subject: imx233: add uartdbg driver

The driver is current unused and very minimal. It can used on
targets which have an accessible UART port and it will be used on
some creative targets as backlight control.

Change-Id: Id710d63574aadb0a2d7327b03187506b469470b1
---
 firmware/target/arm/imx233/uartdbg-imx233.c | 74 +++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 firmware/target/arm/imx233/uartdbg-imx233.c

(limited to 'firmware/target/arm/imx233/uartdbg-imx233.c')

diff --git a/firmware/target/arm/imx233/uartdbg-imx233.c b/firmware/target/arm/imx233/uartdbg-imx233.c
new file mode 100644
index 0000000000..077b405f49
--- /dev/null
+++ b/firmware/target/arm/imx233/uartdbg-imx233.c
@@ -0,0 +1,74 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2013 by Lorenzo Miori
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "uartdbg-imx233.h"
+#include "pinctrl-imx233.h"
+#include "clkctrl-imx233.h"
+
+void imx233_uartdbg_init(unsigned long baud)
+{
+    /* Enable UART clock */
+    imx233_clkctrl_enable(CLK_UART, true);
+    /* Configure UART pins */
+    imx233_pinctrl_setup_vpin(VPIN_UARTDBG_TX, "uartdbg tx", PINCTRL_DRIVE_4mA, false);
+    imx233_pinctrl_setup_vpin(VPIN_UARTDBG_RX, "uartdbg rx", PINCTRL_DRIVE_4mA, false);
+
+    /* Set baud rate */
+    HW_UARTDBG_IBRD = baud >> 16;
+    HW_UARTDBG_FBRD = baud & 0xFFFF;
+
+    /* Set port options (actually needed to set baud rate), 8 bit char, enable FIFO buffer */
+    BF_WR(UARTDBG_LCR_H, WLEN, 3);
+    BF_WR(UARTDBG_LCR_H, FEN, 1);
+
+    /* Finally enable UART device, TX enable, RX enable, device enable */
+    BF_WR(UARTDBG_CR, TXE, 1);
+    BF_WR(UARTDBG_CR, RXE, 1);
+    BF_WR(UARTDBG_CR, UARTEN, 1);
+}
+
+void imx233_uartdbg_send(unsigned char data)
+{
+    /* Wait to transmit if TX FIFO buffer is full*/
+    while (BF_RD(UARTDBG_FR, TXFF));
+    BF_WR(UARTDBG_DR, DATA, data);
+}
+
+void uart_tx(const char* data)
+{
+    while (*data != 0)
+        imx233_uartdbg_send(*data++);
+}
+
+unsigned int uart_rx(char* rx_buf, unsigned int len)
+{
+    unsigned int i = 0;
+
+    while(i < len)
+    {
+        /* Check if the UART Rx Buffer has something into -> RXFE */
+        if(!BF_RD(UARTDBG_FR, RXFE))
+        {
+            rx_buf[i] = HW_UARTDBG_DR;
+            i++;
+        }
+    }
+    return i;
+}
\ No newline at end of file
-- 
cgit v1.2.3