From 12af2926e50450fe8a5aacbc1d4477b68fdd3e63 Mon Sep 17 00:00:00 2001
From: Rafaël Carré <rafael.carre@gmail.com>
Date: Fri, 5 Feb 2010 12:40:25 +0000
Subject: Make Clip+ bootloader build

Now making the Fuzev2 bootloader build should be pretty easy

TODO:
    - write button driver (FlynDice found all buttons already)
    - find button light
    - decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
    - check if backlight code works (I copied Clipv2 code)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
---
 .../arm/as3525/sansa-clipplus/backlight-clip.c     | 53 ++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c

(limited to 'firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c')

diff --git a/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c b/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c
new file mode 100644
index 0000000000..c51d61231d
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipplus/backlight-clip.c
@@ -0,0 +1,53 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright © 2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "backlight-target.h"
+#include "lcd.h"
+#include "as3525v2.h"
+#include "ascodec-target.h"
+
+/* FIXME : this is clipv2 code, not sure if it works the same on clip+ */
+
+void _backlight_on(void)
+{
+    ascodec_write(0x25, ascodec_read(0x25) | 2);    /* lcd power */
+    ascodec_write(0x1c, 8|1);
+    ascodec_write(0x1b, 0x90);
+    lcd_enable(true);
+}
+
+void _backlight_off(void)
+{
+    ascodec_write(0x25, ascodec_read(0x25) & ~2);    /* lcd power */
+    lcd_enable(false);
+}
+
+void _buttonlight_on(void)
+{
+    GPIOA_DIR |= (1<<5);
+    GPIOA_PIN(5) = (1<<5);  /* set pin a5 high */
+}
+
+void _buttonlight_off(void)
+{
+    GPIOA_DIR |= (1<<5);
+    GPIOA_PIN(5) = 0;       /* set pin a5 low */
+}
-- 
cgit v1.2.3