From 50d75f35e9aad9f5c54cb9a1e5fb12ac70fc19ae Mon Sep 17 00:00:00 2001 From: Jack Halpin Date: Sat, 7 Nov 2009 22:11:25 +0000 Subject: sd.h: No functional changes to present code. Added some additional SD CMD's and a #define for card errors flagged in an R1 response. Add SD_SD_STATUS(ACMD13), SD_SET_WR_BLK_ERASE_COUNT(ACMD23), SD_PROGRAM_CSD(CMD27). Add #define SD_R1_CARD_ERROR to make card error checking easier. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23560 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/sd.h | 78 +++++++++++++++++++++++++++++++++------------------- 1 file changed, 50 insertions(+), 28 deletions(-) (limited to 'firmware/export') diff --git a/firmware/export/sd.h b/firmware/export/sd.h index f2854423ec..c12546562e 100644 --- a/firmware/export/sd.h +++ b/firmware/export/sd.h @@ -72,34 +72,37 @@ int sd_num_drives(int first_drive); #define SD_DIS 8 /* SD Commands */ -#define SD_GO_IDLE_STATE 0 -#define SD_ALL_SEND_CID 2 -#define SD_SEND_RELATIVE_ADDR 3 -#define SD_SET_DSR 4 -#define SD_SWITCH_FUNC 6 -#define SD_SET_BUS_WIDTH 6 /* acmd6 */ -#define SD_SELECT_CARD 7 -#define SD_DESELECT_CARD 7 -#define SD_SEND_IF_COND 8 -#define SD_SEND_CSD 9 -#define SD_SEND_CID 10 -#define SD_STOP_TRANSMISSION 12 -#define SD_SEND_STATUS 13 -#define SD_GO_INACTIVE_STATE 15 -#define SD_SET_BLOCKLEN 16 -#define SD_READ_SINGLE_BLOCK 17 -#define SD_READ_MULTIPLE_BLOCK 18 -#define SD_SEND_NUM_WR_BLOCKS 22 -#define SD_WRITE_BLOCK 24 -#define SD_WRITE_MULTIPLE_BLOCK 25 -#define SD_ERASE_WR_BLK_START 32 -#define SD_ERASE_WR_BLK_END 33 -#define SD_ERASE 38 -#define SD_APP_OP_COND 41 -#define SD_LOCK_UNLOCK 42 -#define SD_SET_CLR_CARD_DETECT 42 /* acmd42 */ -#define SD_SEND_SCR 51 /* acmd51 */ -#define SD_APP_CMD 55 +#define SD_GO_IDLE_STATE 0 +#define SD_ALL_SEND_CID 2 +#define SD_SEND_RELATIVE_ADDR 3 +#define SD_SET_DSR 4 +#define SD_SWITCH_FUNC 6 +#define SD_SET_BUS_WIDTH 6 /* acmd6 */ +#define SD_SELECT_CARD 7 /* with card's rca */ +#define SD_DESELECT_CARD 7 /* with rca = 0 */ +#define SD_SEND_IF_COND 8 +#define SD_SEND_CSD 9 +#define SD_SEND_CID 10 +#define SD_STOP_TRANSMISSION 12 +#define SD_SEND_STATUS 13 +#define SD_SD_STATUS 13 /* acmd13 */ +#define SD_GO_INACTIVE_STATE 15 +#define SD_SET_BLOCKLEN 16 +#define SD_READ_SINGLE_BLOCK 17 +#define SD_READ_MULTIPLE_BLOCK 18 +#define SD_SEND_NUM_WR_BLOCKS 22 /* acmd22 */ +#define SD_SET_WR_BLK_ERASE_COUNT 23 /* acmd23 */ +#define SD_WRITE_BLOCK 24 +#define SD_WRITE_MULTIPLE_BLOCK 25 +#define SD_PROGRAM_CSD 27 +#define SD_ERASE_WR_BLK_START 32 +#define SD_ERASE_WR_BLK_END 33 +#define SD_ERASE 38 +#define SD_APP_OP_COND 41 /* acmd41 */ +#define SD_LOCK_UNLOCK 42 +#define SD_SET_CLR_CARD_DETECT 42 /* acmd42 */ +#define SD_SEND_SCR 51 /* acmd51 */ +#define SD_APP_CMD 55 /* SD/MMC status in R1, for native mode (SPI bits are different) @@ -144,4 +147,23 @@ int sd_num_drives(int first_drive); /* SD OCR bits */ #define SD_OCR_CARD_CAPACITY_STATUS (1 << 30) /* Card Capacity Status */ +/* All R1 Response flags that indicate Card error(vs MCI Controller error) */ +#define SD_R1_CARD_ERROR ( SD_R1_OUT_OF_RANGE \ + | SD_R1_ADDRESS_ERROR \ + | SD_R1_BLOCK_LEN_ERROR \ + | SD_R1_ERASE_SEQ_ERROR \ + | SD_R1_ERASE_PARAM \ + | SD_R1_WP_VIOLATION \ + | SD_R1_LOCK_UNLOCK_FAILED \ + | SD_R1_COM_CRC_ERROR \ + | SD_R1_ILLEGAL_COMMAND \ + | SD_R1_CARD_ECC_FAILED \ + | SD_R1_CC_ERROR \ + | SD_R1_ERROR \ + | SD_R1_UNDERRUN \ + | SD_R1_CSD_OVERWRITE \ + | SD_R1_WP_ERASE_SKIP \ + | SD_R1_AKE_SEQ_ERROR) + + #endif -- cgit v1.2.3