From 01d4b4c99714f5e22d25e0a86dfd0e75824b1f3e Mon Sep 17 00:00:00 2001 From: Bertrik Sikken Date: Sat, 14 Feb 2009 16:19:21 +0000 Subject: Sansa Clip: enable battery charging. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20006 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-clip.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'firmware/export') diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h index 95ed715276..1068440e63 100644 --- a/firmware/export/config-clip.h +++ b/firmware/export/config-clip.h @@ -134,14 +134,14 @@ /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD -#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ -#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ -#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ +#define BATTERY_CAPACITY_DEFAULT 380 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 380 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 380 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ -/* Hardware controlled charging? FIXME */ -#define CONFIG_CHARGING CHARGING_SIMPLE +/* Charging implemented in a target-specific algorithm */ +#define CONFIG_CHARGING CHARGING_TARGET /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER -- cgit v1.2.3