From 8fb67f48ab57770c3233352de17846a8a773192a Mon Sep 17 00:00:00 2001 From: Cástor Muñoz Date: Thu, 12 May 2016 06:47:38 +0200 Subject: iPod Classic: updates for uc8702 driver - Small rework on the UC8702 UART controller to make it compatible with other s5l870x SOCs. Files moved and renamed, many conditional code added to deal with capabilities and 'features' of the different CPUs. - A couple of optimizacions that should not affect the functionality. Change-Id: I705169f7e8b18d5d1da642f81ffc31c4089780a6 --- firmware/export/uc870x.h | 372 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 firmware/export/uc870x.h (limited to 'firmware/export/uc870x.h') diff --git a/firmware/export/uc870x.h b/firmware/export/uc870x.h new file mode 100644 index 0000000000..ad7168fe64 --- /dev/null +++ b/firmware/export/uc870x.h @@ -0,0 +1,372 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2014 by Cástor Muñoz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#ifndef __UC870X_H__ +#define __UC870X_H__ + +#include +#include + +#include "config.h" +#include "system.h" +#include "uart-target.h" + + +/* + * UC870x: UART controller for s5l870x + * + * This UART is similar to the UART described in s5l8700 datasheet, + * (see also s3c2416 and s3c6400 datasheets). On s5l8701/2 the UC870x + * includes autobauding, and fine tunning for Tx/Rx on s5l8702. + */ + +/* + * Controller registers + */ +#define REG32_PTR_T volatile uint32_t * + +#define ULCON(ba) (*((REG32_PTR_T)((ba) + 0x00))) /* line control */ +#define UCON(ba) (*((REG32_PTR_T)((ba) + 0x04))) /* control */ +#define UFCON(ba) (*((REG32_PTR_T)((ba) + 0x08))) /* FIFO control */ +#define UMCON(ba) (*((REG32_PTR_T)((ba) + 0x0C))) /* modem control */ +#define UTRSTAT(ba) (*((REG32_PTR_T)((ba) + 0x10))) /* Tx/Rx status */ +#define UERSTAT(ba) (*((REG32_PTR_T)((ba) + 0x14))) /* Rx error status */ +#define UFSTAT(ba) (*((REG32_PTR_T)((ba) + 0x18))) /* FIFO status */ +#define UMSTAT(ba) (*((REG32_PTR_T)((ba) + 0x1C))) /* modem status */ +#define UTXH(ba) (*((REG32_PTR_T)((ba) + 0x20))) /* transmission hold */ +#define URXH(ba) (*((REG32_PTR_T)((ba) + 0x24))) /* receive buffer */ +#define UBRDIV(ba) (*((REG32_PTR_T)((ba) + 0x28))) /* baud rate divisor */ +#if CONFIG_CPU != S5L8700 +#define UABRCNT(ba) (*((REG32_PTR_T)((ba) + 0x2c))) /* autobaud counter */ +#define UABRSTAT(ba) (*((REG32_PTR_T)((ba) + 0x30))) /* autobaud status */ +#endif +#if CONFIG_CPU == S5L8702 +#define UBRCONTX(ba) (*((REG32_PTR_T)((ba) + 0x34))) /* Tx frame config */ +#define UBRCONRX(ba) (*((REG32_PTR_T)((ba) + 0x38))) /* Rx frame config */ +#endif + +/* ULCON register */ +#define ULCON_DATA_BITS_MASK 0x3 +#define ULCON_DATA_BITS_POS 0 +#define ULCON_DATA_BITS_5 0 +#define ULCON_DATA_BITS_6 1 +#define ULCON_DATA_BITS_7 2 +#define ULCON_DATA_BITS_8 3 + +#define ULCON_STOP_BITS_MASK 0x1 +#define ULCON_STOP_BITS_POS 2 +#define ULCON_STOP_BITS_1 0 +#define ULCON_STOP_BITS_2 1 + +#define ULCON_PARITY_MASK 0x7 +#define ULCON_PARITY_POS 3 +#define ULCON_PARITY_NONE 0 +#define ULCON_PARITY_ODD 4 +#define ULCON_PARITY_EVEN 5 +#define ULCON_PARITY_FORCE_1 6 +#define ULCON_PARITY_FORCE_0 7 + +#define ULCON_INFRARED_EN_BIT (1 << 6) + +/* UCON register */ +#define UCON_RX_MODE_MASK 0x3 +#define UCON_RX_MODE_POS 0 + +#define UCON_TX_MODE_MASK 0x3 +#define UCON_TX_MODE_POS 2 + +#define UCON_MODE_DISABLED 0 +#define UCON_MODE_INTREQ 1 /* INT request or polling mode */ +#define UCON_MODE_UNDEFINED 2 /* Not defined, DMAREQ signal 1 ??? */ +#define UCON_MODE_DMAREQ 3 /* DMA request (signal 0) */ + +#define UCON_SEND_BREAK_BIT (1 << 4) +#define UCON_LOOPBACK_BIT (1 << 5) +#define UCON_RX_TOUT_EN_BIT (1 << 7) /* Rx timeout enable */ + +#define UCON_CLKSEL_MASK 0x1 +#define UCON_CLKSEL_POS 10 +#define UCON_CLKSEL_PCLK 0 /* internal */ +#define UCON_CLKSEL_ECLK 1 /* external */ + +#if CONFIG_CPU == S5L8702 +#define UCON_RX_TOUT_INT_BIT (1 << 11) /* Rx timeout INT enable */ +#endif +#define UCON_RX_INT_BIT (1 << 12) /* Rx INT enable */ +#define UCON_TX_INT_BIT (1 << 13) /* Tx INT enable */ +#define UCON_ERR_INT_BIT (1 << 14) /* Rx error INT enable */ +#define UCON_MODEM_INT_BIT (1 << 15) /* modem INT enable (TBC) */ +#if CONFIG_CPU != S5L8700 +#define UCON_AUTOBR_INT_BIT (1 << 16) /* autobauding INT enable */ +#define UCON_AUTOBR_START_BIT (1 << 17) /* autobauding start/stop */ +#endif + +#if CONFIG_CPU == S5L8701 +/* WTF! ABR bits are swapped on reads, so don't forget to + always use this workaround to read the UCON register. */ +static inline uint32_t _UCON_RD(uint32_t ba) +{ + uint32_t ucon = UCON(ba); + return ((ucon & 0xffff) | + ((ucon & UCON_AUTOBR_INT_BIT) << 1) | + ((ucon & UCON_AUTOBR_START_BIT) >> 1)); +} +#else +#define _UCON_RD(ba) UCON(ba) +#endif + +/* UFCON register */ +#define UFCON_FIFO_ENABLE_BIT (1 << 0) +#define UFCON_RX_FIFO_RST_BIT (1 << 1) +#define UFCON_TX_FIFO_RST_BIT (1 << 2) + +#define UFCON_RX_FIFO_TRG_MASK 0x3 +#define UFCON_RX_FIFO_TRG_POS 4 +#define UFCON_RX_FIFO_TRG_4 0 +#define UFCON_RX_FIFO_TRG_8 1 +#define UFCON_RX_FIFO_TRG_12 2 +#define UFCON_RX_FIFO_TRG_16 3 + +#define UFCON_TX_FIFO_TRG_MASK 0x3 +#define UFCON_TX_FIFO_TRG_POS 6 +#define UFCON_TX_FIFO_TRG_EMPTY 0 +#define UFCON_TX_FIFO_TRG_4 1 +#define UFCON_TX_FIFO_TRG_8 2 +#define UFCON_TX_FIFO_TRG_12 3 + +/* UMCON register */ +#define UMCON_RTS_BIT (1 << 0) +#define UMCON_AUTO_FLOW_CTRL_BIT (1 << 4) + +/* UTRSTAT register */ +#define UTRSTAT_RXBUF_RDY_BIT (1 << 0) +#define UTRSTAT_TXBUF_EMPTY_BIT (1 << 1) +#define UTRSTAT_TX_EMPTY_BIT (1 << 2) +#if CONFIG_CPU == S5L8702 +#define UTRSTAT_RX_TOUT_INT_BIT (1 << 3) /* Rx timeout INT status */ +#endif +#define UTRSTAT_RX_INT_BIT (1 << 4) +#define UTRSTAT_TX_INT_BIT (1 << 5) +#define UTRSTAT_ERR_INT_BIT (1 << 6) +#define UTRSTAT_MODEM_INT_BIT (1 << 7) /* modem INT status */ +#if CONFIG_CPU != S5L8700 +#define UTRSTAT_AUTOBR_INT_BIT (1 << 8) /* autobauding INT status */ +#endif + +/* UERSTAT register */ +#define UERSTAT_OVERRUN_BIT (1 << 0) +#define UERSTAT_PARITY_ERR_BIT (1 << 1) +#define UERSTAT_FRAME_ERR_BIT (1 << 2) +#define UERSTAT_BREAK_DETECT_BIT (1 << 3) + +/* UFSTAT register */ +#define UFSTAT_RX_FIFO_CNT_MASK 0xf +#define UFSTAT_RX_FIFO_CNT_POS 0 + +#define UFSTAT_TX_FIFO_CNT_MASK 0xf +#define UFSTAT_TX_FIFO_CNT_POS 4 + +#define UFSTAT_RX_FIFO_FULL_BIT (1 << 8) +#define UFSTAT_TX_FIFO_FULL_BIT (1 << 9) +#define UFSTAT_RX_FIFO_ERR_BIT (1 << 10) /* clears when reading UERSTAT + for the last pending error */ +/* UMSTAT register */ +#define UMSTAT_CTS_ACTIVE_BIT (1 << 0) +#define UMSTAT_CTS_DELTA_BIT (1 << 4) + + +#if CONFIG_CPU == S5L8702 +/* Bitrate: + * + * Master UCLK clock is divided by 16 to serialize data, UBRDIV is + * used to configure nominal bit width, NBW = (UBRDIV+1)*16 in UCLK + * clock ticks. + * + * Fine tuning works shrining/expanding each individual bit of each + * frame. Each bit width can be incremented/decremented by 1/16 of + * nominal bit width, it seems UCLK is divided by 17 for expanded + * bits and divided by 15 for compressed bits. A whole frame of N + * bits can be shrined or expanded up to (NBW * N / 16) UCLK clock + * ticks (in 1/16 steps). + */ +/* UBRCONx register */ +#define UC_FRAME_MAX_LEN 12 /* 1 start + 8 data + 1 par + 2 stop */ +#define UBRCON_JITTER_MASK 0x3 +#define UBRCON_JITTER_POS(bit) ((bit) << 1) /* 0..UC_FRAME_MAX_LEN-1 */ + +#define UBRCON_JITTER_NONE 0 /* no jitter for this bit */ +#define UBRCON_JITTER_INC 1 /* increment 1/16 bit width */ +#define UBRCON_JITTER_UNUSED 2 /* does nothing */ +#define UBRCON_JITTER_DEC 3 /* decremet 1/16 bit width */ +#endif /* CONFIG_CPU == S5L8702 */ + + +#if CONFIG_CPU != S5L8700 +/* Autobauding: + * + * Initial UABRSTAT is NOT_INIT, it goes to READY when either of + * UCON_AUTOBR bits are enabled for the first time. + * + * Interrupts are enabled/disabled using UCON_AUTOBR_INT_BIT and + * checked using UTRSTAT_AUTOBR_INT_BIT, writing this bit cleans the + * interrupt. + * + * When UCON_AUTOBR_START_BIT is enabled, autobauding starts and the + * hardware waits for a low pulse on RX line. + * + * Once autobauding is started, when a falling edge is detected on + * the RX line, UABRSTAT changes to COUNTING status, an internal + * counter starts incrementing at UCLK clock frequency. During + * COUNTING state, UABRCNT reads as the value of the previous ABR + * count, not the value of the current internal count. + * + * Count finish when a rising edge is detected on the line, at this + * moment internal counter stops and it can be read using UABRCNT + * register, UABRSTAT goes to READY, AUTOBR_START_BIT is disabled, + * and an interrupt is raised if UCON_AUTOBR_INT_BIT is enabled. + */ +/* UABRSTAT register */ +#define UABRSTAT_STATUS_MASK 0x3 +#define UABRSTAT_STATUS_POS 0 + +#define UABRSTAT_STATUS_NOT_INIT 0 /* initial status */ +#define UABRSTAT_STATUS_READY 1 /* machine is ready */ +#define UABRSTAT_STATUS_COUNTING 2 /* count in progress */ +#endif /* CONFIG_CPU != S5L8700 */ + + +/* + * other HW definitions + */ +#define UART_FIFO_SIZE 16 + + +/* + * structs + */ +struct uartc +{ + /* static configuration */ + uint8_t id; + uint8_t n_ports; + uint16_t port_off; + uint32_t baddr; + struct uartc_port **port_l; +}; + +struct uartc_port +{ + /* static configuration */ + const struct uartc * const uartc; + const uint8_t id; /* port number */ + const uint8_t rx_trg; /* UFCON_RX_FIFO_TRG_xxx */ + const uint8_t tx_trg; /* UFCON_TX_FIFO_TRG_xxx */ + const uint8_t clksel; /* UFCON_CLKSEL_xxx */ + const uint32_t clkhz; /* UCLK (PCLK or ECLK) frequency */ + void (* const tx_cb) (int len); /* ISRs */ +#if CONFIG_CPU != S5L8700 + void (* const rx_cb) (int len, char *data, char *err, uint32_t abr_cnt); +#else + void (* const rx_cb) (int len, char *data, char *err); +#endif + + /* private */ + uint32_t baddr; + uint32_t utrstat_int_mask; + uint8_t rx_data[UART_FIFO_SIZE]; /* data buffer for rx_cb */ + uint8_t rx_err[UART_FIFO_SIZE]; /* error buffer for rx_cb */ +#if CONFIG_CPU != S5L8700 + bool abr_aborted; +#endif + +#ifdef UC870X_DEBUG + uint32_t n_tx_bytes; + uint32_t n_rx_bytes; + uint32_t n_ovr_err; + uint32_t n_parity_err; + uint32_t n_frame_err; + uint32_t n_break_detect; +#if CONFIG_CPU != S5L8700 + /* autobauding */ + uint32_t n_abnormal0; + uint32_t n_abnormal1; +#endif +#endif +}; + + +/* + * uc870x low level API + */ + +/* Initialization */ +void uartc_open(const struct uartc* uartc); +void uartc_close(const struct uartc* uartc); +void uartc_port_open(struct uartc_port *port); +void uartc_port_close(struct uartc_port *port); +void uartc_port_rx_onoff(struct uartc_port *port, bool onoff); +void uartc_port_tx_onoff(struct uartc_port *port, bool onoff); + +/* Configuration */ +void uartc_port_config(struct uartc_port *port, + uint8_t data_bits, uint8_t parity, uint8_t stop_bits); +void uartc_port_set_bitrate_raw(struct uartc_port *port, uint32_t brdata); +void uartc_port_set_bitrate(struct uartc_port *port, unsigned int speed); +void uartc_port_set_rx_mode(struct uartc_port *port, uint32_t mode); +void uartc_port_set_tx_mode(struct uartc_port *port, uint32_t mode); + +/* Transmit */ +bool uartc_port_tx_ready(struct uartc_port *port); +void uartc_port_tx_byte(struct uartc_port *port, uint8_t ch); +void uartc_port_send_byte(struct uartc_port *port, uint8_t ch); + +/* Receive */ +bool uartc_port_rx_ready(struct uartc_port *port); +uint8_t uartc_port_rx_byte(struct uartc_port *port); +uint8_t uartc_port_read_byte(struct uartc_port *port); + +#if CONFIG_CPU != S5L8700 +/* Autobauding */ +void uartc_port_abr_start(struct uartc_port *port); +void uartc_port_abr_stop(struct uartc_port *port); +#endif + +/* ISR */ +void uartc_callback(const struct uartc *uartc, int port_id); + +/* Debug */ +#ifdef UC870X_DEBUG +void uartc_port_get_line_info(struct uartc_port *port, + int *tx_status, int *rx_status, + int *tx_speed, int *rx_speed, char *line_cfg); + +#if CONFIG_CPU != S5L8700 +enum { + ABR_INFO_ST_IDLE, + ABR_INFO_ST_LAUNCHED, + ABR_INFO_ST_COUNTING, + ABR_INFO_ST_ABNORMAL +}; + +int uartc_port_get_abr_info(struct uartc_port *port, uint32_t *abr_cnt); +#endif +#endif /* UC870X_DEBUG */ + +#endif /* __UC870X_H__ */ -- cgit v1.2.3