From af81cc4a935753d3ba6c692b7e928691f0155355 Mon Sep 17 00:00:00 2001 From: Amaury Pouly Date: Sat, 20 Aug 2016 21:28:50 +0100 Subject: imx233: slightly rework 3D audio setting The old code made the setting appear as 0dB, 1.5dB, 3dB and 4.5dB when in fact it is 0dB, 3dB, 4.5dB and 6dB. This commit clarifies the code and also fix this at the same time. This imx233 3D enhancement is complete crap anyway but now you can satisfy yourself with 6 dB of pure crap, clearly an enhancement. Change-Id: Ia3e088987c1ff0cdde228905ff70f46476a499a2 --- firmware/export/imx233-codec.h | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'firmware/export/imx233-codec.h') diff --git a/firmware/export/imx233-codec.h b/firmware/export/imx233-codec.h index 10500f15b9..040a829284 100644 --- a/firmware/export/imx233-codec.h +++ b/firmware/export/imx233-codec.h @@ -21,12 +21,12 @@ #ifndef __IMX233_CODEC_H_ #define __IMX233_CODEC_H_ -/* i.MX233 can boost up to 6dB in DAC mode and 12dB in line mode. Since mic/line - * already have adjustable gain, keep lowest of both. With chained DAC volume - * and headphone volume, the i.MX233 can achieve < -100dB but stay at -100dB. */ #define AUDIOHW_CAPS (DEPTH_3D_CAP | BASS_CAP | TREBLE_CAP | \ LIN_GAIN_CAP | MIC_GAIN_CAP) +/* i.MX233 can boost up to 6dB in DAC mode and 12dB in line mode. Pretend we can + * do 12dB (but we cap at 6dB in DAC mode). With chained DAC volume + * and headphone volume, the i.MX233 can achieve < -100dB but stay at -100dB. */ AUDIOHW_SETTING(VOLUME, "dB", 0, 1, -100, 12, -25) /* HAVE_SW_TONE_CONTROLS */ #ifdef HAVE_RECORDING @@ -38,7 +38,16 @@ AUDIOHW_SETTING(LEFT_GAIN, "dB", 0, 1, -100, 22, 0) AUDIOHW_SETTING(RIGHT_GAIN, "dB", 0, 1, -100, 22, 0) AUDIOHW_SETTING(MIC_GAIN, "dB", 0, 1, -100, 60, 20) #endif /* HAVE_RECORDING */ -/* i.MX233 has four settings: 0dB, 3dB, 4.5dB, 6dB so fake 1.5dB steps */ -AUDIOHW_SETTING(DEPTH_3D, "dB", 1,15, 0, 60, 0) +/* i.MX233 has four settings: 0dB, 3dB, 4.5dB, 6dB */ +/* depth_3d setting: 0=0dB, 1=3dB, 2=4.5dB, 3=6dB. Return value in tenth of dB */ +static inline int imx233_depth_3d_val2phys(int val) +{ + if(val == 0) + return 0; /* 0dB */ + else + return 15 * (val + 1); /* 3dB + 1.5dB per step */ +} +AUDIOHW_SETTING(DEPTH_3D, "dB", 1, 1, 0, 3, 0, imx233_depth_3d_val2phys(val)) + #endif /* __IMX233_CODEC_H_ */ -- cgit v1.2.3