From e8a8a1be43afe63079ae48ce1a9eb3052df3b1a4 Mon Sep 17 00:00:00 2001 From: Tomasz Moń Date: Wed, 16 Nov 2011 14:08:01 +0000 Subject: Sandisk Sansa Connect port (FS #12363) Included are drivers for buttons, backlight, lcd, audio and storage. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config/sansaconnect.h | 201 ++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 firmware/export/config/sansaconnect.h (limited to 'firmware/export/config') diff --git a/firmware/export/config/sansaconnect.h b/firmware/export/config/sansaconnect.h new file mode 100644 index 0000000000..714534d6ad --- /dev/null +++ b/firmware/export/config/sansaconnect.h @@ -0,0 +1,201 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * + * Copyright (C) 2011 by Tomasz Moń + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +/* + * This config file is for the Sansa Connect + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* This is the absolute address on the bus set by OF bootloader */ +#define CONFIG_SDRAM_START 0x01000000 + +#define SANSA_CONNECT 1 +#define MODEL_NAME "Sandisk Sansa Connect" + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 81 + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if you use an SD controller */ +#define CONFIG_STORAGE STORAGE_SD + +#define HAVE_MULTIDRIVE +#define NUM_DRIVES 2 +#define HAVE_HOTSWAP +#define HAVE_HOTSWAP_STORAGE_AS_MAIN + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you want album art for this target */ +#define HAVE_ALBUMART + +/* define this to enable bitmap scaling */ +#define HAVE_BMP_SCALING + +/* define this to enable JPEG decoding */ +#define HAVE_JPEG + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if the target has volume keys which can be used in the lists */ +#define HAVE_VOLUME_IN_LIST + +/* define this if you want viewport clipping enabled for safe LCD functions */ +#define HAVE_VIEWPORT_CLIP + +/* LCD dimensions */ +#define CONFIG_LCD LCD_CONNECT + +#define LCD_WIDTH 240 +#define LCD_HEIGHT 320 + +#define LCD_DEPTH 16 /* 65k colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +#define HAVE_LCD_ENABLE +#ifndef BOOTLOADER +#define HAVE_LCD_SLEEP +#endif + +#define LCD_SLEEP_TIMEOUT (2*HZ) + +#define MAX_ICON_HEIGHT 35 +#define MAX_ICON_WIDTH 35 + + +#define CONFIG_KEYPAD SANSA_CONNECT_PAD + +/* Define this to have CPU bootsted while scrolling in the UI */ +#define HAVE_GUI_BOOST + +/* define this if the target has volume keys which can be used in the lists */ +#define HAVE_VOLUME_IN_LIST + +#define HAVE_MORSE_INPUT + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +//#define HAVE_HARDWARE_BEEP + +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +#define HAVE_AIC3X + +//#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8 + +/* define this if you have a real-time clock */ +//#define CONFIG_RTC RTC_STM41T62 + +/* define this if the unit uses a scrollwheel for navigation */ +#define HAVE_SCROLLWHEEL + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +#define HAVE_BACKLIGHT_BRIGHTNESS + +#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 +#define MAX_BRIGHTNESS_SETTING 20 +#define DEFAULT_BRIGHTNESS_SETTING 16 /* OF default brightness (80%) */ +#define DEFAULT_DIMNESS_SETTING 6 /* OF default inactive (30%) */ + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x200000 + +#define BATTERY_CAPACITY_DEFAULT 800 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 100 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* define current usage levels */ +#if 0 +/* TODO */ +#define CURRENT_NORMAL 85 +#define CURRENT_BACKLIGHT 200 +#endif + +/* Hardware controlled charging with monitoring */ +//#define CONFIG_CHARGING CHARGING_MONITOR + +#define CONFIG_CPU DM320 + +#define CONFIG_I2C I2C_DM320 +#define HAVE_SOFTWARE_I2C + +/* define this if the hardware can be powered off while charging */ +#define HAVE_POWEROFF_WHILE_CHARGING + +/* The size of the flash ROM */ +#define FLASH_SIZE 0x400000 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 150000000 + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +#if 0 +#define HAVE_USBSTACK +#define USB_VENDOR_ID 0x0781 +#define USB_PRODUCT_ID 0x7480 +#endif + +#define INCLUDE_TIMEOUT_API + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +/* Define this if a programmable hotkey is mapped */ +#define HAVE_HOTKEY -- cgit v1.2.3