From 463b3ed8b2630d1b9d656dd2a52bbcbd429b4c08 Mon Sep 17 00:00:00 2001 From: Bertrik Sikken Date: Sat, 27 Aug 2011 16:21:19 +0000 Subject: Initial framework for the Sandisk Sansa Clip Zip git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30365 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config/sansaclipzip.h | 202 ++++++++++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 firmware/export/config/sansaclipzip.h (limited to 'firmware/export/config/sansaclipzip.h') diff --git a/firmware/export/config/sansaclipzip.h b/firmware/export/config/sansaclipzip.h new file mode 100644 index 0000000000..749439c668 --- /dev/null +++ b/firmware/export/config/sansaclipzip.h @@ -0,0 +1,202 @@ +/* + * This config file is for the Sandisk Sansa Clip Zip + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 79 +#define MODEL_NAME "Sandisk Sansa Zip" +#define FIRMWARE_OFFSET_FILE_DATA 8 +#define FIRMWARE_OFFSET_FILE_CRC 0 + + +#ifndef BOOTLOADER +#define HAVE_MULTIDRIVE +#define NUM_DRIVES 2 +#define HAVE_HOTSWAP +#endif + +#define HW_SAMPR_CAPS SAMPR_CAP_ALL + +/* define this if you have recording possibility */ +#define HAVE_RECORDING + +#define REC_SAMPR_CAPS SAMPR_CAP_ALL + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* LCD dimensions */ +#define LCD_WIDTH 96 +#define LCD_HEIGHT 96 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */ + +/* define this if you have LCD enable function */ +//#define HAVE_LCD_ENABLE + +#ifndef BOOTLOADER +/* Define this if your LCD can be put to sleep. + * HAVE_LCD_ENABLE should be defined as well. */ +//#define HAVE_LCD_SLEEP +//#define HAVE_LCD_SLEEP_SETTING +#endif + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the pixels */ +#define HAVE_LCD_INVERT + +/* Define this if your LCD can set contrast */ +#define HAVE_LCD_CONTRAST + +#define MIN_CONTRAST_SETTING 0 +#define MAX_CONTRAST_SETTING 50 +#define DEFAULT_CONTRAST_SETTING 30 + +#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */ + +#define CONFIG_KEYPAD SANSA_CLIP_PAD + +/* define this if the target has volume keys which can be used in the lists */ +#define HAVE_VOLUME_IN_LIST + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +/* AS3514 or newer */ +#define HAVE_AS3514 +#define HAVE_AS3543 + +#ifndef BOOTLOADER +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_AS3514 + +/* Define if the device can wake from an RTC alarm */ +#define HAVE_RTC_ALARM +#endif + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +#define HAVE_FAT16SUPPORT + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE (0x100000-0x8000) + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE + +/* FM Tuner */ +#define CONFIG_TUNER SI4700 /* in fact SI4702 */ +//#define HAVE_TUNER_PWR_CTRL + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define CONFIG_STORAGE STORAGE_SD + +#define BATTERY_CAPACITY_DEFAULT 290 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 290 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 290 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* Charging implemented in a target-specific algorithm */ +#define CONFIG_CHARGING CHARGING_TARGET + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/** Non-simulator section **/ +#ifndef SIMULATOR + +/* Define this if you have a AMS AS3525v2 SoC */ +#define CONFIG_CPU AS3525v2 + +/* Define this if you want to use the AS3525 i2c interface */ +#define CONFIG_I2C I2C_AS3525 + +/* define this if the hardware can be powered off while charging */ +/* Sansa can't be powered off while charging */ +/* #define HAVE_POWEROFF_WHILE_CHARGING */ + +/* define current usage levels (based on battery bench) */ +#define CURRENT_NORMAL 19 /* TODO copied from clipplus */ +#define CURRENT_BACKLIGHT 15 /* TODO copied from clipplus */ +#define CURRENT_RECORD CURRENT_NORMAL /* TODO */ + +/* maximum charging current */ +#define CURRENT_MAX_CHG 150 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 240000000 + +/* Type of LCD */ +#define CONFIG_LCD LCD_CLIPZIP + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_AS3525v2 + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +#define USB_HANDLED_BY_OF +//#define USE_ROCKBOX_USB +#define USB_VENDOR_ID 0x0781 /* TODO */ +#define USB_PRODUCT_ID 0x74d1 /* TODO */ + + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +/* Define this if you have adjustable CPU frequency */ +//#define HAVE_ADJUSTABLE_CPU_FREQ + +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +#define ICODE_ATTR_TREMOR_NOT_MDCT + +#define INCLUDE_TIMEOUT_API + +#endif /* SIMULATOR */ + +/** Port-specific settings **/ + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 /* TODO */ +#define MAX_BRIGHTNESS_SETTING 12 /* TODO */ +#define DEFAULT_BRIGHTNESS_SETTING 6 /* TODO */ + +/* Default recording levels */ +#define DEFAULT_REC_MIC_GAIN 23 +#define DEFAULT_REC_LEFT_GAIN 23 +#define DEFAULT_REC_RIGHT_GAIN 23 + +/* Define this if a programmable hotkey is mapped */ +//#define HAVE_HOTKEY -- cgit v1.2.3