From 6f0320a9535bc1aa81d83fa879ac14d5ee603658 Mon Sep 17 00:00:00 2001 From: William Wilgus Date: Fri, 27 Jul 2018 23:56:32 +0200 Subject: As3525 v1/v2 Add power savings menu Allow user to select cpu undervolt There have been quite a few issues across the SANSA AMS line related to CPU undervolting while most players show greatly increased runtime some crash. Rather than constanly upping the voltage we now have a setting with a safe value for all players and the option for lower voltages I plan to add a few other options here later such as disk timings and maybe some other clocks/experimental settings Added: Disk Low speed option for AS3525v2 devices cuts frequency to 12 MHz from 24 MHz Added: Disk Low speed option for AS3525v1 devices cuts frequency to 15.5 MHz from 31 MHz Added: I2c Low Speed AS3525 devices, should be bigger improvement for v1 devices Fixed: Debug menu for AS3525v2 No SDSLOT frequency, Showed IDE freq though it is unused Added: DBOP and SSP underclocking affects display on v1/v2 respectively Fixed: debug menu now has SSP frequency, and SSP_CPSR Update: made settings menu more generic Update: cleaned up code Added: Clip v1 & Fuze v1 didn't have HAVE_ADJUSTABLE_CPU_VOLTAGE. not sure why but, waiting on testing to confirm Added: C200v2 and E200v2 devices and HAVE_ADJUSTABLE_CPU_VOLTAGE. Fixed: v1 devices don't like display timing set lower (dbop) v1 devices don't have a divider set for ssp (causes divide by 0) Fixed: ClipZip display lags with Max SSP divider changed from 0xFE to 0x32 Fixed: v1 devices didn't work properly with highspeed sd cards Added code from http://gerrit.rockbox.org/r/#/c/1704/ Added powersave and IDE interface enable/disable Added: V2 devices now have powersave enabled on sd interface Update: cleaned up code, lang defines, added manual entries Update ssp clock mechanism added calculated ssp divider to clipzip Update turn display clock off when clip+ turns off display Fixed: clipzip wrong register for SSP clock Change-Id: I04137682243be92f0f8d8bf1cfa54fbb1965559b TODO: add other players? --- firmware/export/config/sansaclip.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'firmware/export/config/sansaclip.h') diff --git a/firmware/export/config/sansaclip.h b/firmware/export/config/sansaclip.h index cdee43d44a..f0300c2ac1 100644 --- a/firmware/export/config/sansaclip.h +++ b/firmware/export/config/sansaclip.h @@ -186,6 +186,14 @@ /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ +/*define this to enable CPU voltage scaling on AMS devices*/ +#define HAVE_ADJUSTABLE_CPU_VOLTAGE + +#ifndef BOOTLOADER +/*define this with flags for power saving options device supports*/ +#define CONFIG_POWER_SAVING (POWERSV_CPU | POWERSV_I2C | POWERSV_DISK) +#endif + #define BOOTFILE_EXT "sansa" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" -- cgit v1.2.3