From 66fa5b578904f7df61293d6ce5c08966b5db13db Mon Sep 17 00:00:00 2001 From: Björn Stenberg Date: Mon, 7 Dec 2009 09:03:11 +0000 Subject: Rename targets to be consistent in all places. (FS #10819) git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config/logikdax.h | 150 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 firmware/export/config/logikdax.h (limited to 'firmware/export/config/logikdax.h') diff --git a/firmware/export/config/logikdax.h b/firmware/export/config/logikdax.h new file mode 100644 index 0000000000..8cfbbd8bd8 --- /dev/null +++ b/firmware/export/config/logikdax.h @@ -0,0 +1,150 @@ +/* + * This config file is for the Logik DAX MP3/DAB + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 33 + +#define MODEL_NAME "Logik DAX MP3/DAB" + +/* define this if you have recording possibility */ +//#define HAVE_RECORDING + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) + +#if 0 /* Enable for USB driver test */ +#define HAVE_USBSTACK +#define USB_VENDOR_ID 0x13d1 +#define USB_PRODUCT_ID 0x1002 +#endif + + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the colours on your LCD */ +#define HAVE_LCD_INVERT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +#define HAVE_FAT16SUPPORT + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +#define CONFIG_STORAGE STORAGE_NAND + +#define CONFIG_NAND NAND_TCC + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 64 +#define LCD_DEPTH 1 + +#define LCD_PIXELFORMAT VERTICAL_PACKING + +/* Display colours, for screenshots and sim (0xRRGGBB) */ +#define LCD_DARKCOLOR 0x000000 +#define LCD_BRIGHTCOLOR 0x5a915a +#define LCD_BL_DARKCOLOR 0x000000 +#define LCD_BL_BRIGHTCOLOR 0x82b4fa + +/* define this to indicate your device's keypad */ +#define CONFIG_KEYPAD LOGIK_DAX_PAD + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_TCC77X + +/* define this if you have RTC RAM available for settings */ +//#define HAVE_RTC_RAM + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x38000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x10000 + +#define AB_REPEAT_ENABLE 1 + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* The DAX uses built-in WM8731 codec */ +#define HAVE_WM8731 +/* Codec is slave on serial bus */ +#define CODEC_SLAVE + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +#define CONFIG_I2C I2C_TCC77X + +#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 50 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* define this if the unit should not shut down on low battery. */ +#define NO_LOW_BATTERY_SHUTDOWN + +#ifndef SIMULATOR + +/* Define this if you have a TCC773L */ +#define CONFIG_CPU TCC773L + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +#define HAVE_FAT16SUPPORT + +/* Define this to the CPU frequency */ +#define CPU_FREQ 120000000 + +/* Offset ( in the firmware file's header ) to the file length */ +#define FIRMWARE_OFFSET_FILE_LENGTH 0 + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 4 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 6 + +/* The start address index for ROM builds */ +/* #define ROM_START 0x11010 for behind original Archos */ +#define ROM_START 0x7010 /* for behind BootBox */ + +#define CONFIG_LCD LCD_SSD1815 + +#define BOOTFILE_EXT "logik" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/" + +#define IBSS_ATTR_VOICE_STACK +#define ICODE_ATTR_TREMOR_NOT_MDCT +#define ICODE_ATTR_TREMOR_MDCT +#define ICODE_ATTR_FLAC +#define IBSS_ATTR_FLAC_DECODED0 +#define ICONST_ATTR_MPA_HUFFMAN +#define IBSS_ATTR_MPC_SAMPLE_BUF +#define ICODE_ATTR_ALAC +#define IBSS_ATTR_SHORTEN_DECODED0 + +#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */ + +#endif /* SIMULATOR */ -- cgit v1.2.3