From 2a471e288c16b91a7186a60b3fb84dd55a494c7a Mon Sep 17 00:00:00 2001
From: Solomon Peachy <pizza@shaftnet.org>
Date: Thu, 8 Oct 2020 09:47:40 -0400
Subject: New port:  AIGO EROS Q / EROS K

The Q and K have a slightly different case, but the hardware under the
shell is completely identical.

These models are rebadged versions:

 * Hifiwalker H2   (== Q)
 * AGPTek H3       (== K)
 * Surfans F20     (== K)

Other notes:

  * Significant improvements in the shared Hiby-platform launcher/loader
    * SD card can theoretically be hot-swapped now
    * Support external USB mass storage!
  * Some consolidation of Hiby-platform targets
  * Some consolidation of plugin keymaps

Todo/known issues:

 * Keymaps need to be gone over properly
 * Convert to HAVE_SCROLLWHEEL?

Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
---
 firmware/export/config/aigoerosq.h | 132 +++++++++++++++++++++++++++++++++++++
 1 file changed, 132 insertions(+)
 create mode 100644 firmware/export/config/aigoerosq.h

(limited to 'firmware/export/config/aigoerosq.h')

diff --git a/firmware/export/config/aigoerosq.h b/firmware/export/config/aigoerosq.h
new file mode 100644
index 0000000000..9207b5548f
--- /dev/null
+++ b/firmware/export/config/aigoerosq.h
@@ -0,0 +1,132 @@
+/*
+ * This config file is for the AIGO EROS Q / EROS K (and its clones)
+ */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 113
+
+#define MODEL_NAME   "AIGO Eros Q"
+
+/* LCD dimensions */
+#define LCD_WIDTH  320
+#define LCD_HEIGHT 240
+/* sqrt(240^2 + 320^2) / 2.0 = 200 */
+#define LCD_DPI 200
+
+#ifndef SIMULATOR
+#define CONFIG_PLATFORM (PLATFORM_HOSTED)
+#endif
+
+#define HIBY_LINUX
+#define HAVE_FPU
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+#define HAVE_LCD_ENABLE
+
+/* Define this if the LCD can shut down */
+#define HAVE_LCD_SHUTDOWN
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+#define LCD_DEPTH  32
+/* Check that but should not matter */
+#define LCD_PIXELFORMAT XRGB8888
+
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+/* Main LCD backlight brightness range and defaults: the backlight driver
+ * has levels from 0 to 255. But 0 is off so start at 1.
+ */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING      255
+#define BRIGHTNESS_STEP             5
+#define DEFAULT_BRIGHTNESS_SETTING  70
+
+/* Which backlight fading type? */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC APPLICATION
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x100000
+
+#define HAVE_HEADPHONE_DETECTION
+#define HAVE_LINEOUT_DETECTION
+
+/* KeyPad configuration for plugins */
+#define CONFIG_KEYPAD EROSQ_PAD
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+#ifndef SIMULATOR
+/* We have usb power and can detect usb but it is handled by Linux */
+#define HAVE_USB_POWER
+
+#endif
+
+#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
+
+/* Linux controlls charging, we can monitor */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* same dimensions as gigabeats */
+#define CONFIG_LCD LCD_INGENIC_LINUX
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ           108000000
+
+/* No special storage */
+#define CONFIG_STORAGE STORAGE_HOSTFS
+#define HAVE_STORAGE_FLUSH
+
+/* Battery */
+#define BATTERY_TYPES_COUNT  1
+
+/* Audio codec */
+#define HAVE_EROSQ_LINUX_CODEC
+/* Rockbox has to handle the volume level */
+#define HAVE_SW_VOLUME_CONTROL
+
+/* We don't have hardware controls */
+#define HAVE_SW_TONE_CONTROLS
+
+/* HW codec is flexible */
+#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192
+
+/* Battery */
+#define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 2000  /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 0   /* capacity increment */
+
+/* ROLO */
+#define BOOTFILE_EXT "erosq"
+#define BOOTFILE     "rockbox." BOOTFILE_EXT
+#define BOOTDIR      "/.rockbox"
-- 
cgit v1.2.3