From b4275d4941e464c851ae3f5fe33c80f56ea365e5 Mon Sep 17 00:00:00 2001 From: Mark Arigo Date: Wed, 21 May 2008 03:55:17 +0000 Subject: Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-sa9200.h | 167 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100755 firmware/export/config-sa9200.h (limited to 'firmware/export/config-sa9200.h') diff --git a/firmware/export/config-sa9200.h b/firmware/export/config-sa9200.h new file mode 100755 index 0000000000..9cdfe6bba7 --- /dev/null +++ b/firmware/export/config-sa9200.h @@ -0,0 +1,167 @@ +/* + * This config file is for the Philips GoGear SA9200 + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 26 +#define MODEL_NAME "Philips GoGear SA200" + +#define HW_SAMPR_CAPS (SAMPR_CAP_44) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you want album art for this target */ +#define HAVE_ALBUMART + +/* define this if you have a light associated with the buttons */ +#define HAVE_BUTTON_LIGHT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 160 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +/* define this if you have LCD enable function */ +/* #define HAVE_LCD_ENABLE */ + +/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE + should be defined as well. */ +/* #define HAVE_LCD_SLEEP */ + +/* define this if you can flip your LCD */ +/* #define HAVE_LCD_FLIP */ + +/* define this if you can invert the colours on your LCD */ +/* #define HAVE_LCD_INVERT */ + +/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ + +#define CONFIG_KEYPAD PHILIPS_SA9200_PAD + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +/* The PP5024 has a built-in AustriaMicrosystems AS3514 */ +#define HAVE_AS3514 + +/* define this if you have a real-time clock */ +#ifndef BOOTLOADER +#define CONFIG_RTC RTC_AS3514 +#endif + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* Some Sansa E200s seem to be FAT16 formatted */ +#define HAVE_FAT16SUPPORT + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x80000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE 1 + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 +#define MAX_BRIGHTNESS_SETTING 12 +#define DEFAULT_BRIGHTNESS_SETTING 6 + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define HAVE_ATA_SD + +#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* Hardware controlled charging? FIXME */ +#define CONFIG_CHARGING CHARGING_SIMPLE + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/** Non-simulator section **/ +#ifndef SIMULATOR + +/* Define this if you have a PortalPlayer PP5024 */ +#define CONFIG_CPU PP5024 + +/* Define this if you want to use the PP5024 i2c interface */ +#define CONFIG_I2C I2C_PP5024 + +/* define this if the hardware can be powered off while charging */ +/* Sansa can't be powered off while charging */ +/* #define HAVE_POWEROFF_WHILE_CHARGING */ + +/* The start address index for ROM builds */ +#define ROM_START 0x00000000 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 75000000 + +/* Type of LCD TODO: hopefully the same as the x5 but check this*/ +#define CONFIG_LCD LCD_SA9200 + +/* #define USB_IPODSTYLE */ + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_ARC + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +#define USB_VENDOR_ID 0x0471 +#define USB_PRODUCT_ID 0x014f + +/* WARNING! Enable Rockbox USB mass storage. */ +#ifndef BOOTLOADER +#define USE_ROCKBOX_USB +#endif + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define MI4_FORMAT +#define BOOTFILE_EXT "mi4" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" + +/* These values are unused, but need to be defined */ +#define FIRMWARE_OFFSET_FILE_CRC 0x0 +#define FIRMWARE_OFFSET_FILE_DATA 0x8 + +#define ICODE_ATTR_TREMOR_NOT_MDCT + +#define INCLUDE_TIMEOUT_API + +#endif /* SIMULATOR */ -- cgit v1.2.3