From 08c41d42bb699a1be99c9696b4d4fb7b40e8723a Mon Sep 17 00:00:00 2001 From: Dave Chapman Date: Sun, 19 Oct 2008 14:11:01 +0000 Subject: Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-m200v2.h | 127 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 firmware/export/config-m200v2.h (limited to 'firmware/export/config-m200v2.h') diff --git a/firmware/export/config-m200v2.h b/firmware/export/config-m200v2.h new file mode 100644 index 0000000000..9386a157f6 --- /dev/null +++ b/firmware/export/config-m200v2.h @@ -0,0 +1,127 @@ +/* + * This config file is for the Sansa M200 series + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 42 + +#define MODEL_NAME "Sandisk Sansa m200 series" + +/* Enable FAT16 support */ +#define HAVE_FAT16SUPPORT + +/* define this if you have recording possibility */ +//#define HAVE_RECORDING + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the colours on your LCD */ +#define HAVE_LCD_INVERT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 64 +#define LCD_DEPTH 1 + +#define LCD_PIXELFORMAT VERTICAL_PACKING + +/* define this to indicate your device's keypad */ +#define CONFIG_KEYPAD SANSA_M200_PAD + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_AS3525 + +/* define this if you have RTC RAM available for settings */ +//#define HAVE_RTC_RAM + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x38000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x10000 + +#define AB_REPEAT_ENABLE 1 + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* Define this if you have the TLV320 audio codec */ +/*#define HAVE_TLV320*/ + +/* TLV320 has no tone controls, so we use the software ones */ +#define HAVE_SW_TONE_CONTROLS + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +#define CONFIG_I2C I2C_AS3525 + +#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 50 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* define this if the unit should not shut down on low battery. */ +#define NO_LOW_BATTERY_SHUTDOWN + +#ifndef SIMULATOR + +/* Define this if you have an AMS AS3525 */ +#define CONFIG_CPU AS3525 + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +/* Define this to the CPU frequency */ +#define CPU_FREQ 120000000 + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +/* Software controlled LED */ +#define CONFIG_LED LED_VIRTUAL + +#define CONFIG_LCD LCD_SSD1815 + +#define BOOTFILE_EXT "sansa" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/" + +#define IBSS_ATTR_VOICE_STACK +#define ICODE_ATTR_TREMOR_NOT_MDCT +#define ICODE_ATTR_TREMOR_MDCT +#define ICODE_ATTR_FLAC +#define IBSS_ATTR_FLAC_DECODED0 +#define ICONST_ATTR_MPA_HUFFMAN +#define IBSS_ATTR_MPC_SAMPLE_BUF +#define ICODE_ATTR_ALAC +#define IBSS_ATTR_SHORTEN_DECODED0 + +#endif /* SIMULATOR */ -- cgit v1.2.3