From f2042983f08cd49404be0b6916fc73d778fe8dba Mon Sep 17 00:00:00 2001 From: Dave Chapman Date: Fri, 2 May 2008 19:12:09 +0000 Subject: Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-m200.h | 116 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 firmware/export/config-m200.h (limited to 'firmware/export/config-m200.h') diff --git a/firmware/export/config-m200.h b/firmware/export/config-m200.h new file mode 100644 index 0000000000..760474d628 --- /dev/null +++ b/firmware/export/config-m200.h @@ -0,0 +1,116 @@ +/* + * This config file is for the Sansa M200 series + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 28 + +/* define this if you have recording possibility */ +//#define HAVE_RECORDING + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF) + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you can flip your LCD */ +#define HAVE_LCD_FLIP + +/* define this if you can invert the colours on your LCD */ +#define HAVE_LCD_INVERT + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN +/* define this if you have access to the pitchscreen */ +#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 64 +#define LCD_DEPTH 1 + +#define LCD_PIXELFORMAT VERTICAL_PACKING + +/* define this to indicate your device's keypad */ +#define CONFIG_KEYPAD SANSA_M200_PAD + +/* define this if you have a real-time clock */ +#define CONFIG_RTC RTC_TCC77X + +/* define this if you have RTC RAM available for settings */ +//#define HAVE_RTC_RAM + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x8000 + +#define AB_REPEAT_ENABLE 1 + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* Define this if you have the TLV320 audio codec */ +#define HAVE_TLV320 + +/* TLV320 has no tone controls, so we use the software ones */ +#define HAVE_SW_TONE_CONTROLS + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT + +#define CONFIG_I2C I2C_TCC77X + +#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 50 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* define this if the unit should not shut down on low battery. */ +#define NO_LOW_BATTERY_SHUTDOWN + +#ifndef SIMULATOR + +/* Define this if you have a TCC773L */ +#define CONFIG_CPU TCC773L + +/* Define this if you have ATA power-off control */ +#define HAVE_ATA_POWER_OFF + +/* Define this to the CPU frequency */ +#define CPU_FREQ 120000000 + +/* Offset ( in the firmware file's header ) to the file length */ +#define FIRMWARE_OFFSET_FILE_LENGTH 0 + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 4 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 6 + +/* The start address index for ROM builds */ +/* #define ROM_START 0x11010 for behind original Archos */ +#define ROM_START 0x7010 /* for behind BootBox */ + +/* Software controlled LED */ +#define CONFIG_LED LED_VIRTUAL + +#define CONFIG_LCD LCD_SSD1815 + +#define BOOTFILE_EXT "m200" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/" + +#endif /* SIMULATOR */ -- cgit v1.2.3