From 66fa5b578904f7df61293d6ce5c08966b5db13db Mon Sep 17 00:00:00 2001 From: Björn Stenberg Date: Mon, 7 Dec 2009 09:03:11 +0000 Subject: Rename targets to be consistent in all places. (FS #10819) git-svn-id: svn://svn.rockbox.org/rockbox/branches/v3_4@23881 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-gigabeat-s.h | 227 ------------------------------------ 1 file changed, 227 deletions(-) delete mode 100644 firmware/export/config-gigabeat-s.h (limited to 'firmware/export/config-gigabeat-s.h') diff --git a/firmware/export/config-gigabeat-s.h b/firmware/export/config-gigabeat-s.h deleted file mode 100644 index 3f001af737..0000000000 --- a/firmware/export/config-gigabeat-s.h +++ /dev/null @@ -1,227 +0,0 @@ -/* - * This config file is for toshiba Gigabeat S - */ - -#define TARGET_TREE /* this target is using the target tree system */ - -#define TOSHIBA_GIGABEAT_S 1 - -#define MODEL_NAME "Toshiba Gigabeat S" - -/* For Rolo and boot loader */ -#define MODEL_NUMBER 21 - -/* define this if you use an ATA controller */ -#define CONFIG_STORAGE STORAGE_ATA - -/* define this if you have a bitmap LCD display */ -#define HAVE_LCD_BITMAP - -/* define this if you have a colour LCD */ -#define HAVE_LCD_COLOR - -/* define this if you want album art for this target */ -#define HAVE_ALBUMART - -/* define this to enable bitmap scaling */ -#define HAVE_BMP_SCALING - -/* define this to enable JPEG decoding */ -#define HAVE_JPEG - -/* define this if you have access to the quickscreen */ -#define HAVE_QUICKSCREEN - -/* define this if you have access to the pitchscreen */ -#define HAVE_PITCHSCREEN - -/* define this if you would like tagcache to build on this target */ -#define HAVE_TAGCACHE - -/* define this if the target has volume keys which can be used in the lists */ -#define HAVE_VOLUME_IN_LIST - -/* LCD dimensions */ -#define LCD_WIDTH 240 -#define LCD_HEIGHT 320 -#define LCD_DEPTH 16 /* 65k colours */ -#define LCD_PIXELFORMAT RGB565 /* rgb565 */ - -#define CONFIG_KEYPAD GIGABEAT_S_PAD - -/* Define keyboard features */ -#define KBD_CURSOR_KEYS /* allow non-line edit cursor movement */ -#define KBD_MODES /* enable line edit */ -#define KBD_MORSE_INPUT /* enable morse code input */ - -/* Define this if you do software codec */ -#define CONFIG_CODEC SWCODEC - -/* define this if you have a real-time clock */ -#define CONFIG_RTC RTC_MC13783 - -/* Define if the device can wake from an RTC alarm */ -#define HAVE_RTC_ALARM - -/* Define this for LCD backlight available */ -#define HAVE_BACKLIGHT - -/* define this if you have a disk storage, i.e. something - that needs spinups and can cause skips when shaked */ -#define HAVE_DISK_STORAGE - -/* Define this if you have a software controlled poweroff */ -#define HAVE_SW_POWEROFF - -/* The number of bytes reserved for loadable codecs */ -#define CODEC_SIZE 0x100000 - -/* The number of bytes reserved for loadable plugins */ -#define PLUGIN_BUFFER_SIZE 0x80000 - -/* Define this if you have a SI4700 fm radio tuner */ -#define CONFIG_TUNER SI4700 - -/* Define this if you have the WM8978 audio codec */ -#define HAVE_WM8978 - -/* Define bitmask of input sources - recordable bitmask can be defined - explicitly if different */ -#define INPUT_SRC_CAPS SRC_CAP_FMRADIO - -/* define the bitmask of hardware sample rates */ -#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ - SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ - SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) - -/* define the bitmask of recording sample rates */ -#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */ - -/* define default recording levels */ -#define DEFAULT_REC_LEFT_GAIN 0 -#define DEFAULT_REC_RIGHT_GAIN 0 - -/* Define this if you have recording capability */ -#define HAVE_RECORDING - -/* Define this if your LCD can be put to sleep. */ -#define HAVE_LCD_SLEEP -/* We don't use a setting but a fixed delay after the backlight has - * turned off */ -#define LCD_SLEEP_TIMEOUT (2*HZ) - -/* Define this if your LCD can be enabled/disabled */ -#define HAVE_LCD_ENABLE - -#ifndef BOOTLOADER - -#define HAVE_BACKLIGHT_BRIGHTNESS - -/* Main LCD backlight brightness range and defaults */ -#define MIN_BRIGHTNESS_SETTING 1 -#define MAX_BRIGHTNESS_SETTING 24 -#define DEFAULT_BRIGHTNESS_SETTING 12 - -/* Implementation-defined fading type with bool settings */ -#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET - -#define HAVE_HEADPHONE_DETECTION -#endif /* BOOTLOADER */ - -#ifndef SIMULATOR - -/* The LCD on a Gigabeat is 240x320 - it is portrait */ -#define HAVE_PORTRAIT_LCD - -#define CONFIG_CPU IMX31L - -/* Define this if you want to use imx31l's i2c interface */ -#define CONFIG_I2C I2C_IMX31L - -/* Define the bitmask of modules used */ -#define SPI_MODULE_MASK (USE_CSPI2_MODULE) -#define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE) -#define GPIO_EVENT_MASK (USE_GPIO1_EVENTS) - -/* Define this if target has an additional number of threads specific to it */ -#define TARGET_EXTRA_THREADS 2 - -/* Type of mobile power - check this out */ -#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */ -#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ -#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ -#define BATTERY_CAPACITY_INC 25 /* capacity increment */ -#define BATTERY_TYPES_COUNT 1 /* only one type */ - -/* TODO: have a proper status displayed in the bootloader and have it - * work! */ -/* Charing implemented in a target-specific algorithm */ -#define CONFIG_CHARGING CHARGING_TARGET - -/* define this if the hardware can be powered off while charging */ -#define HAVE_POWEROFF_WHILE_CHARGING - -/* The size of the flash ROM */ -#define FLASH_SIZE 0x400000 - -/* Define this to the CPU frequency */ -/* TODO */ -#define CPU_FREQ 264000000 /* Set by retailOS loader */ - -/* define this if the unit can be powered or charged via USB */ -#define HAVE_USB_POWER -#define USBPOWER_BUTTON BUTTON_MENU -#define USBPOWER_BTN_IGNORE BUTTON_POWER - -/* define this if the unit has a battery switch or battery can be removed - * when running */ -#define HAVE_BATTERY_SWITCH - -/* USB On-the-go */ -#define CONFIG_USBOTG USBOTG_ARC - -/* enable these for the usb stack */ -#define USE_ROCKBOX_USB -#define HAVE_USBSTACK -/* usb stack and driver settings */ -#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI -#define USB_VENDOR_ID 0x0930 -#define USB_PRODUCT_ID 0x0010 - -/* Define this if you have ATA power-off control */ -#define HAVE_ATA_POWER_OFF - -/* Define this to add support for ATA DMA */ -#define HAVE_ATA_DMA - -#define CONFIG_LCD LCD_GIGABEAT - -/* define this if the backlight can be set to a brightness */ -//#define HAVE_BACKLIGHT_SET_FADING -#define __BACKLIGHT_INIT - -/* Offset ( in the firmware file's header ) to the file CRC */ -#define FIRMWARE_OFFSET_FILE_CRC 0 - -/* Offset ( in the firmware file's header ) to the real data */ -#define FIRMWARE_OFFSET_FILE_DATA 8 - -//#define HAVE_SERIAL -#define HAVE_VOLUME_IN_LIST - -/*Remove Comments from UART_INT to enable the UART interrupts,*/ -/*otherwise iterrupts will be disabled. For now we will test */ -/*UART state by polling the registers, and if necessary update this */ -/*method by using the interrupts instead*/ -//#define UART_INT - -/* Define this if you have adjustable CPU frequency */ -/* #define HAVE_ADJUSTABLE_CPU_FREQ */ - -#define HAVE_PCM_DMA_ADDRESS - -#define BOOTFILE_EXT "gigabeat" -#define BOOTFILE "rockbox." BOOTFILE_EXT -#define BOOTDIR "/.rockbox" - -#endif -- cgit v1.2.3