From 0fc30d117412f2cbd8e00a043e0c901345125d31 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Tue, 1 Aug 2006 22:28:14 +0000 Subject: added mostly dummy changes to allow building of a Sansa e200 bootloader without functionality git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10399 a1c6a512-1295-4272-9138-f99709370657 --- firmware/export/config-e200.h | 121 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+) create mode 100644 firmware/export/config-e200.h (limited to 'firmware/export/config-e200.h') diff --git a/firmware/export/config-e200.h b/firmware/export/config-e200.h new file mode 100644 index 0000000000..3793a716ec --- /dev/null +++ b/firmware/export/config-e200.h @@ -0,0 +1,121 @@ +/* + * This config file is for the Sandisk Sansa e200 + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 12 + +/* define this if you have recording possibility */ +/*#define HAVE_RECORDING 1*/ /* TODO: add support for this */ + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP 1 + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR 1 + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* LCD dimensions */ +#define LCD_WIDTH 176 +#define LCD_HEIGHT 220 +#define LCD_DEPTH 16 /* 65536 colours */ +#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */ + +/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ + +#define CONFIG_KEYPAD SANSA_E200_PAD + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +/* define this if you have a real-time clock */ +#ifndef BOOTLOADER +#define CONFIG_RTC RTC_E8564 /* TODO: figure this out */ +#endif + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x80000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +/* Define this if you have the WM8975 audio codec */ +#define HAVE_WM8731 + +#define AB_REPEAT_ENABLE 1 + +/* FM Tuner */ +/*#define CONFIG_TUNER TEA5767 +#define CONFIG_TUNER_XTAL 32768 *//* TODO: what is this? */ + +/* Define this for LCD backlight available */ +#define CONFIG_BACKLIGHT BL_H10 /* TODO: figure this out, probably not necessary + because of 'target' stuff */ + +#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity + TODO: check this, probably different + for different models too */ + +#ifndef SIMULATOR + +/* Define this if you have a PortalPlayer PP5024 */ +#define CONFIG_CPU PP5024 + +/* Define this if you want to use the PP5020 i2c interface */ +#define CONFIG_I2C I2C_PP5020 + +/* Type of mobile power */ +#define CONFIG_BATTERY BATT_LPCS355385 +#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 10 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ +#define BATTERY_SCALE_FACTOR 5865 + +/* Hardware controlled charging? FIXME */ +//#define CONFIG_CHARGING CHARGING_SIMPLE + +/* define this if the hardware can be powered off while charging */ +/* TODO: should this be set for the H10? */ +//#define HAVE_POWEROFF_WHILE_CHARGING + +/* The start address index for ROM builds */ +#define ROM_START 0x00000000 + +/* Define this to the CPU frequency */ +/* TODO: this is probably wrong */ +#define CPU_FREQ 11289600 + +/* Type of LCD TODO: hopefully the same as the x5 but check this*/ +#define CONFIG_LCD LCD_X5 + +/* Offset ( in the firmware file's header ) to the file length */ +#define FIRMWARE_OFFSET_FILE_LENGTH 0 + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +/* #define USB_IPODSTYLE */ + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +/* Define this if you have adjustable CPU frequency */ +/*#define HAVE_ADJUSTABLE_CPU_FREQ Let's say we don't for now*/ + +#define BOOTFILE_EXT "e200" +#define BOOTFILE "rockbox." BOOTFILE_EXT + +#endif -- cgit v1.2.3