From 3e7a09cb0dee0ee04b5c77f427bf89d990ec8d0b Mon Sep 17 00:00:00 2001 From: Dana Conrad Date: Sat, 26 Jun 2021 12:07:11 -0500 Subject: New Port: Eros Q Native What works: - LCD: 16-bit RGB565 - all buttons, including scrollwheel - SD Card - Battery level and charging/not charging status - USB - audio - sample rate switching - HP / LO detect, with "safe" fixed LO volume - LO volume will only be put to user-defined max volume if headphones are not present. - rtc - Plugins build, tried a couple and they seem OK - Bootloader, installable to nand via usbboot What doesn't work: - Dual Boot - power on/off has intermittent, low volume audio click (sometimes it's completely silent, sometimes there's a click) - Audio uses 16-bit volume scaling, so clicking/popping is pretty bad at lower volumes - need 32 bit volume scaling, 24 bit I2S data - USB HID keys not yet defined - no jztool support Unknowns: - Stereo Switch pins: Direction select, AC_DC (probably not even hooked up) - What is the actual purpose of the Stereo Swtich? - How does the bluetooth module connect? "Someday" stuff: - get LCD working at higher bit depth - Bluetooth Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33 --- firmware/export/audiohw.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'firmware/export/audiohw.h') diff --git a/firmware/export/audiohw.h b/firmware/export/audiohw.h index 5b2815149d..5a706da3b8 100644 --- a/firmware/export/audiohw.h +++ b/firmware/export/audiohw.h @@ -210,6 +210,8 @@ struct sound_settings_info #include "df1704.h" #elif defined(HAVE_PCM1792_CODEC) #include "pcm1792.h" +#elif defined(HAVE_EROS_QN_CODEC) +#include "eros_qn_codec.h" #elif defined(HAVE_NWZ_LINUX_CODEC) #include "nwzlinux_codec.h" #elif defined(HAVE_CS4398) -- cgit v1.2.3