From c42a1a05bbd623e434d34d72aa320188a723675d Mon Sep 17 00:00:00 2001
From: Jens Arnold <amiconn@rockbox.org>
Date: Sat, 7 May 2005 22:29:35 +0000
Subject: Moved unrelated stuff from i2c the driver to appropriate places.
 Minor optimisation in i2c driver.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6419 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/drivers/i2c.c   | 24 ++++++++----------------
 firmware/drivers/mas.c   |  6 +++++-
 firmware/drivers/power.c |  6 ++++++
 3 files changed, 19 insertions(+), 17 deletions(-)

(limited to 'firmware/drivers')

diff --git a/firmware/drivers/i2c.c b/firmware/drivers/i2c.c
index ed12145da9..71cb9cf8b0 100644
--- a/firmware/drivers/i2c.c
+++ b/firmware/drivers/i2c.c
@@ -50,7 +50,7 @@
 #define SDA_HI     or_b(0x80, &PBDRL)
 #define SDA_INPUT  and_b(~0x80, &PBIORL)
 #define SDA_OUTPUT or_b(0x80, &PBIORL)
-#define SDA     (PBDR & 0x80)
+#define SDA        (PBDRL & 0x80)
 
 #if CONFIG_I2C == I2C_ONDIO
 /* Ondio pinout, SCL moved to PB6 */
@@ -58,14 +58,14 @@
 #define SCL_OUTPUT or_b(0x40, &PBIORL)
 #define SCL_LO     and_b(~0x40, &PBDRL)
 #define SCL_HI     or_b(0x40, &PBDRL)
-#define SCL     (PBDR & 0x0040)
+#define SCL        (PBDRL & 0x40)
 #else 
 /* "classic" pinout, SCL is PB13 */
 #define SCL_INPUT  and_b(~0x20, &PBIORH)
 #define SCL_OUTPUT or_b(0x20, &PBIORH)
 #define SCL_LO     and_b(~0x20, &PBDRH)
 #define SCL_HI     or_b(0x20, &PBDRH)
-#define SCL     (PBDR & 0x2000)
+#define SCL        (PBDRH & 0x20)
 #endif
 #endif /* ! I2C_GMINI */
 
@@ -109,22 +109,14 @@ void i2c_init(void)
 #if CONFIG_I2C == I2C_GMINI
    SCL_INPUT;
    SDA_INPUT;   
-#else
-#if CONFIG_I2C == I2C_ONDIO
-   /* make PB5, PB6 & PB7 general I/O */
-   PBCR2 &= ~0xfc00; /* includes PB5, see FIXME below */
+#elif CONFIG_I2C == I2C_ONDIO
+   /* make PB6 & PB7 general I/O */
+   PBCR2 &= ~0xf000;
 #else /* not Gmini, not Ondio */
-   /* make PB5, PB7 & PB13 general I/O */
+   /* make PB7 & PB13 general I/O */
    PBCR1 &= ~0x0c00; /* PB13 */
-   PBCR2 &= ~0xcc00; /* PB5 and PB7, see FIXME below */
+   PBCR2 &= ~0xc000; /* PB7 */
 #endif
-   
-   /* PB5 is "MAS enable" (no I2C signal!). make it output and high */
-   /* FIXME: this is true only for Players, and should go into mas.c */
-   /* for Recorders, it shuts off the charger, for FM/V2 it holds power */
-   or_b(0x20, &PBIORL);
-   or_b(0x20, &PBDRL);
-#endif /* end of non-Gmini */
 
    SCL_OUTPUT;
    SDA_OUTPUT;
diff --git a/firmware/drivers/mas.c b/firmware/drivers/mas.c
index 891ceff18d..7c8b55c422 100644
--- a/firmware/drivers/mas.c
+++ b/firmware/drivers/mas.c
@@ -271,11 +271,15 @@ void mas_reset(void)
     or_b(0x01, &PAIORH);
 
 #if CONFIG_HWCODEC == MAS3507D
+    /* PB5 is "MAS enable". make it GPIO output and high */
+    PBCR2 &= ~0x0c00;
+    or_b(0x20, &PBIORL);
+    or_b(0x20, &PBDRL);
+
     and_b(~0x01, &PADRH);
     sleep(HZ/100);
     or_b(0x01, &PADRH);
     sleep(HZ/5);
-
 #elif (CONFIG_HWCODEC == MAS3587F) || (CONFIG_HWCODEC == MAS3539F)
     if(old_recorder)
     {
diff --git a/firmware/drivers/power.c b/firmware/drivers/power.c
index de62c7aa96..2d6c1c815c 100644
--- a/firmware/drivers/power.c
+++ b/firmware/drivers/power.c
@@ -74,7 +74,13 @@ void power_init(void)
     spdif_power_enable(false);
 #endif
 #else
+#ifdef HAVE_POWEROFF_ON_PB5
+    PBCR2 &= ~0x0c00;    /* GPIO for PB5 */
+    or_b(0x20, &PBIORL); 
+    or_b(0x20, &PBDRL);  /* hold power */
+#endif
 #ifdef HAVE_CHARGE_CTRL
+    PBCR2 &= ~0x0c00;    /* GPIO for PB5 */
     or_b(0x20, &PBIORL); /* Set charging control bit to output */
     charger_enable(false); /* Default to charger OFF */
 #endif
-- 
cgit v1.2.3