From 73a35a1aa445932176fca78688d43c636a3fda5e Mon Sep 17 00:00:00 2001
From: Linus Nielsen Feltzing <linus@haxx.se>
Date: Wed, 16 Nov 2005 23:42:19 +0000
Subject: Reverted erroneous commit

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7918 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/drivers/ata.c          |  8 ++------
 firmware/drivers/i2c-coldfire.c |  3 +--
 firmware/drivers/power.c        | 14 ++++++--------
 3 files changed, 9 insertions(+), 16 deletions(-)

(limited to 'firmware/drivers')

diff --git a/firmware/drivers/ata.c b/firmware/drivers/ata.c
index c0799f30e4..9cc49c1731 100644
--- a/firmware/drivers/ata.c
+++ b/firmware/drivers/ata.c
@@ -1413,20 +1413,16 @@ int ata_init(void)
     or_b(0x02, &PADRH); /* release ATA reset */
     PACR2 &= 0xBFFF; /* GPIO function for PA7 (IDE enable) */
 #elif CONFIG_CPU == MCF5249
-#ifdef HAVE_ATA_LED_CTRL
     /* Enable disk LED & ISD chip power control */
     and_l(~0x0000240, &GPIO_OUT);
     or_l(0x00000240, &GPIO_ENABLE);
     or_l(0x00000200, &GPIO_FUNCTION);
-#endif
     
     /* ATA reset */
-    and_l(~0x00080000, &GPIO_OUT);
+    or_l(0x00080000, &GPIO_OUT);
     or_l(0x00080000, &GPIO_ENABLE);
     or_l(0x00080000, &GPIO_FUNCTION);
-    sleep(10);
-    or_l(0x00080000, &GPIO_OUT);
-    
+
     /* FYI: The IDECONFIGx registers are set by set_cpu_frequency() */
 #elif CONFIG_CPU == PP5020
     /* From ipod-ide.c:ipod_ide_register() */
diff --git a/firmware/drivers/i2c-coldfire.c b/firmware/drivers/i2c-coldfire.c
index 0c83c1cb1a..aecd3a3b3b 100644
--- a/firmware/drivers/i2c-coldfire.c
+++ b/firmware/drivers/i2c-coldfire.c
@@ -37,7 +37,6 @@ static volatile unsigned char *i2c_get_addr(int device);
 
 void i2c_init(void)
 {
-#ifdef IRIVER_H100_SERIES
     /* The FM chip has no pullup for SCL, so we have to bit-bang the
        I2C for that one. */
     or_l(0x00800000, &GPIO1_OUT);
@@ -46,7 +45,7 @@ void i2c_init(void)
     or_l(0x00000008, &GPIO_ENABLE);
     or_l(0x00800000, &GPIO1_FUNCTION);
     or_l(0x00000008, &GPIO_FUNCTION);
-#endif
+
     /* I2C Clock divisor = 576 => 119.952 MHz / 2 / 576 = 104.125 kHz */
     MFDR = 0x14;
 
diff --git a/firmware/drivers/power.c b/firmware/drivers/power.c
index 2547c11cb0..4e5d347d54 100644
--- a/firmware/drivers/power.c
+++ b/firmware/drivers/power.c
@@ -62,25 +62,23 @@ int radio_get_status(void)
 void power_init(void)
 {
 #if CONFIG_CPU == MCF5249
-#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
-//    or_l(0x00080000, &GPIO1_OUT);
-//    or_l(0x00080000, &GPIO1_ENABLE);
-//    or_l(0x00080000, &GPIO1_FUNCTION);
+#if IRIVER_H100_SERIES
+    or_l(0x00080000, &GPIO1_OUT);
+    or_l(0x00080000, &GPIO1_ENABLE);
+    or_l(0x00080000, &GPIO1_FUNCTION);
 
 #ifndef BOOTLOADER
     /* The boot loader controls the power */
-//    ide_power_enable(true);
+    ide_power_enable(true);
 #endif
-    or_l(0x80000000, &GPIO_OUT);
     or_l(0x80000000, &GPIO_ENABLE);
     or_l(0x80000000, &GPIO_FUNCTION);
 #ifdef HAVE_SPDIF_POWER
     spdif_power_enable(false);
 #endif
-#ifdef IRIVER_H300_SERIES
+#elif defined(IRIVER_H300_SERIES)
     pcf50606_init();
 #endif
-#endif
 #elif CONFIG_CPU == PP5020
     /* TODO: Implement power_init() */
 #else
-- 
cgit v1.2.3