From 75cb8ba8a4c3b5f2a5bd7195ef3d61089151a6f5 Mon Sep 17 00:00:00 2001 From: Aidan MacDonald Date: Wed, 21 Apr 2021 01:47:02 +0100 Subject: FiiO M3K/X1000: add USB support This only required a minor patch to the usb-designware driver due to DMA requiring physical addresses -- on the X1000, these differ from virtual addresses so we have to do the usual conversion. Both the mass storage and HID drivers work, but there are a few issues so this can't be considered 100% stable yet. - Mass storage might not be detected properly on insertion, and USB has to be replugged before it shows up - HID driver may occasionally panic or hang the machine Change-Id: Ia3ce7591d5928ec7cbca7953abfef01bdbd873ef --- firmware/SOURCES | 1 + 1 file changed, 1 insertion(+) (limited to 'firmware/SOURCES') diff --git a/firmware/SOURCES b/firmware/SOURCES index d306f0b8e8..463933b8c5 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -1741,6 +1741,7 @@ target/mips/ingenic_x1000/pwm-x1000.c target/mips/ingenic_x1000/sfc-x1000.c target/mips/ingenic_x1000/system-x1000.c target/mips/ingenic_x1000/timer-x1000.c +target/mips/ingenic_x1000/usb-x1000.c #if (CONFIG_STORAGE & (STORAGE_SD|STORAGE_MMC|STORAGE_ATA)) target/mips/ingenic_x1000/msc-x1000.c #endif -- cgit v1.2.3