From 0d8667bbe44b6c9bf35a82954710555875751687 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Tue, 17 Jun 2003 07:13:14 +0000 Subject: Andreas Stemmer's update to Q74, contributions from multiple persons on the Rockbox list. Thanks friends! git-svn-id: svn://svn.rockbox.org/rockbox/trunk@3752 a1c6a512-1295-4272-9138-f99709370657 --- docs/FAQ | 50 +++++++++++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 21 deletions(-) (limited to 'docs/FAQ') diff --git a/docs/FAQ b/docs/FAQ index 9e24d44abb..ed36309047 100644 --- a/docs/FAQ +++ b/docs/FAQ @@ -677,45 +677,53 @@ A73: Yes, the recorder can crash when you copy several gigabytes of * Copy incrementally. With fully charged standard batteries it should be capable of sustained copying for 2 - 2.5 hours. -Q74: There's a digital I/O connector on my jukebox. What is it good for? +Q74: What should I know about digital I/O connector on my jukebox? A74: The Recorder models have a connector for digital audio output using the common S/PDIF standard (Sony/Phillips Digital Interface). This jack is not present on the Studio/Player/FM Recorder models. By using the digital output in combination with high class external equipment, you can get - much better sound quality out of your jukebox, because you can use better - DA-converters and better amplifiers. + much better sound quality out of your jukebox. This is because you can + use better DA-converters and better amplifiers, plus you eliminate the + analog audio connections between the jukebox and your equipment that can + introduce noise and distortion. The Recorder and the FM Recorder models are able to record from digital sources, too. The digital inputs don't have the 15kHz lowpass filter like the analog inputs and you are sure to minimize the noise floor. - Generally, S/PDIF can be an electrical or an optical signal and there are - many devices that support both. There are even small 3.5mm sockets that - can take either an optical or an electrical cable. But the socket on the - jukebox is for electrical signals only! + + Although S/PDIF can be an electrical or an optical signal and there are + many devices that support both, the socket on the jukebox is for + electrical signals only! Some devices have sockets that look the same, + and can take either an optical or an electrical cable, but sadly this is + not true with the Jukebox. If you want to connect your amp with digital input (RCA type) to the output of your Recorder you need an adapter cable (3.5mm stereo jack to dual RCA jack). Plug the 3.5mm stero jack into the digital I/O socket of your jukebox and the red RCA jack (right channel) into the digital input socket of your amp and that's it. You don't have to enable the digital - output. The sound settings on the digital output are always flat, your - volume, bass, treble, bass boost, loudness settings won't have any effect - here. + output, since it's always on. The sound settings on the digital output + are always flat, your volume, bass, treble, bass boost, loudness settings + won't have any effect here, that's why fade in/out won't work, + either. The sampling frequency of the digital output is the same as the + sampling frequency of the mp3. It's therefore possible that your external + equipment won't be able to synchronize to the output of your jukebox if + you have mp3's with sampling frequencies other than 32, 44.1 or 48kHz + (The pitch shift function also modifies the sampling frequency!). For recording digital signals on the Recorder, use the white RCA jack - (left channel) and plug it into the digital output of your CD player, MD + (left channel) and plug it into the digital output of your CD aplayer, MD player or whatever. Don't forget to select digital input in the recording - settings. Note that there exist some adapter cables with different color - coding, so if output doesn't work the red jack try the white RCA jack, - too. The tip of the 3.5mm jack is the digital input, the ring is the - ouput. + settings! - For recording digital signals on the FM Recorder, you need a special - 4-pole 3.5mm plug (shaft = ground, tip = left channel analog line in, - first ring (next to tip) = right channel analog line in, second ring = - digital in). + Note that there exist some adapter cables with different color coding, so + if it doesn't work try to swap red and white. The tip of the 3.5mm jack + is the digital input, the ring is the ouput. For recording digital + signals on the FM Recorder, you need a special 4-pole 3.5mm plug (shaft = + ground, tip = left channel analog line in, first ring (next to tip) = + right channel analog line in, second ring = digital in). If you want to connect devices with optical inputs/outputs, you need a small converter box which converts your signal from electrical to optical - (for digital output) respectively optical to electrical (for digital - recording). + (for digital output from the Archos) or optical to electrical (for + digital recording in to the Archos). -- cgit v1.2.3