From aaa9a2cceedf45b04a85b206cd622a6fb1d9da77 Mon Sep 17 00:00:00 2001
From: James Buren <braewoods+rb@braewoods.net>
Date: Sat, 14 Nov 2020 14:29:18 +0000
Subject: h1x0/h300: clean up the bootloader source a bit

First this removes most of the conditionals for the CPP as they
are always true for the targets that use the bootloader source.

Second this moves some global variable references around to reduce
some redundancy in the h1x0 bootloader source.

All of this is done to make it easier to compare the two bootloaders
as they are very heavily related to each other.

Change-Id: I7eb4a3106fb9fce6059797310d9e053a3d3ecf63
---
 bootloader/iriver_h1x0.c | 25 +++++--------------------
 1 file changed, 5 insertions(+), 20 deletions(-)

(limited to 'bootloader/iriver_h1x0.c')

diff --git a/bootloader/iriver_h1x0.c b/bootloader/iriver_h1x0.c
index e744b642b0..168bd29b67 100644
--- a/bootloader/iriver_h1x0.c
+++ b/bootloader/iriver_h1x0.c
@@ -57,6 +57,10 @@
 
 #define DRAM_START 0x31000000
 
+/* From common.c */
+extern int line;
+extern int remote_line;
+
 #ifdef HAVE_EEPROM_SETTINGS
 static bool recovery_mode = false;
 #endif
@@ -89,7 +93,6 @@ void start_firmware(void)
     asm(" jmp (%a0)");
 }
 
-#ifdef IRIVER_H100_SERIES
 void start_flashed_romimage(void)
 {
     uint8_t *src = (uint8_t *)FLASH_ROMIMAGE_ENTRY;
@@ -134,7 +137,6 @@ void start_flashed_ramimage(void)
     /* Failure */
     power_off();
 }
-#endif /* IRIVER_H100_SERIES */
 
 void shutdown(void)
 {
@@ -159,9 +161,7 @@ void shutdown(void)
 
     /* Backlight OFF */
     backlight_hw_off();
-#ifdef HAVE_REMOTE_LCD
     remote_backlight_hw_off();
-#endif
 
     __reset_cookie();
     power_off();
@@ -252,7 +252,6 @@ void failsafe_menu(void)
     int defopt = -1;
     char buf[32];
     int i;
-    extern int line;
 
     reset_screen();
     printf("Bootloader %s", rbversion);
@@ -362,18 +361,14 @@ void failsafe_menu(void)
  -> RESET signal */
 inline static void __uda1380_reset_hi(void)
 {
-#ifdef HAVE_UDA1380
     or_l(1<<29, &GPIO_OUT);
     or_l(1<<29, &GPIO_ENABLE);
     or_l(1<<29, &GPIO_FUNCTION);
-#endif
 }
 
 inline static void __uda1380_reset_lo(void)
 {
-#ifdef HAVE_UDA1380
     and_l(~(1<<29), &GPIO_OUT);
-#endif
 }
 
 void main(void)
@@ -385,8 +380,6 @@ void main(void)
     bool rec_button = false;
     bool hold_status = false;
     int data;
-    extern int line;        /* From common.c */
-    extern int remote_line; /* From common.c */
 
     /* We want to read the buttons as early as possible, before the user
        releases the ON button */
@@ -422,22 +415,16 @@ void main(void)
     backlight_hw_off();
 
     /* Remote backlight ON */
-#ifdef HAVE_REMOTE_LCD
     remote_backlight_hw_on();
-#endif
 
     system_init();
     kernel_init();
 
     __uda1380_reset_lo();
 
-#ifdef HAVE_ADJUSTABLE_CPU_FREQ
     /* Set up waitstates for the peripherals */
     set_cpu_frequency(0); /* PLL off */
-#ifdef CPU_COLDFIRE
     coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS);
-#endif
-#endif
     enable_irq();
 
 #ifdef HAVE_EEPROM_SETTINGS
@@ -547,10 +534,8 @@ void main(void)
         lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg);
         lcd_update();
 
-#ifdef HAVE_REMOTE_LCD
         lcd_remote_puts(0, 3, msg);
         lcd_remote_update();
-#endif
 
 #ifdef HAVE_EEPROM_SETTINGS
         if (firmware_settings.initialized)
@@ -608,7 +593,7 @@ void main(void)
 
     printf("Loading firmware");
     i = load_firmware((unsigned char *)DRAM_START, BOOTFILE, MAX_LOADSIZE);
-    if(i < 0)
+    if(i <= EFILE_EMPTY)
         printf("Error: %s", loader_strerror(i));
 
     if (i > 0)
-- 
cgit v1.2.3