From 37eabbfe51e7ed7938c51934921f28cd54a1140d Mon Sep 17 00:00:00 2001 From: James Buren Date: Sat, 14 Nov 2020 14:16:42 +0000 Subject: h1x0/h300: remove trailing whitespace from bootloaders Change-Id: I8f3bfbc8287c8f520894e0cd258066d4c7a02197 --- bootloader/iriver_h1x0.c | 108 +++++++++++++++++++++++------------------------ 1 file changed, 54 insertions(+), 54 deletions(-) (limited to 'bootloader/iriver_h1x0.c') diff --git a/bootloader/iriver_h1x0.c b/bootloader/iriver_h1x0.c index f79c7c9aaf..e744b642b0 100644 --- a/bootloader/iriver_h1x0.c +++ b/bootloader/iriver_h1x0.c @@ -94,21 +94,21 @@ void start_flashed_romimage(void) { uint8_t *src = (uint8_t *)FLASH_ROMIMAGE_ENTRY; int *reset_vector; - + if (!detect_flashed_romimage()) return ; - + reset_vector = (int *)(&src[sizeof(struct flash_header)+4]); asm(" move.w #0x2700,%sr"); __reset_cookie(); - + asm(" move.l %0,%%d0" :: "i"(DRAM_START)); asm(" movec.l %d0,%vbr"); asm(" move.l %0,%%sp" :: "m"(reset_vector[0])); asm(" move.l %0,%%a0" :: "m"(reset_vector[1])); asm(" jmp (%a0)"); - + /* Failure */ power_off(); } @@ -121,14 +121,14 @@ void start_flashed_ramimage(void) if (!detect_flashed_ramimage()) return; - + /* Load firmware from flash */ cpu_boost(true); memcpy(&hdr, src, sizeof(struct flash_header)); src += sizeof(struct flash_header); memcpy(buf, src, hdr.length); cpu_boost(false); - + start_firmware(); /* Failure */ @@ -144,25 +144,25 @@ void shutdown(void) firmware_settings.bl_version = 0; eeprom_settings_store(); #endif - + /* We need to gracefully spin down the disk to prevent clicks. */ if (ide_powered()) { /* Make sure ATA has been initialized. */ storage_init(); - + /* And put the disk into sleep immediately. */ storage_sleepnow(); } sleep(HZ*2); - + /* Backlight OFF */ backlight_hw_off(); #ifdef HAVE_REMOTE_LCD remote_backlight_hw_off(); #endif - + __reset_cookie(); power_off(); } @@ -171,14 +171,14 @@ void shutdown(void) void check_battery(void) { int battery_voltage, batt_int, batt_frac; - + battery_voltage = _battery_voltage(); batt_int = battery_voltage / 1000; batt_frac = (battery_voltage % 1000) / 10; printf("Batt: %d.%02dV", batt_int, batt_frac); - if (battery_voltage <= 310) + if (battery_voltage <= 310) { printf("WARNING! BATTERY LOW!!"); sleep(HZ*2); @@ -190,13 +190,13 @@ void initialize_eeprom(void) { if (detect_original_firmware()) return ; - + if (!eeprom_settings_init()) { recovery_mode = true; return ; } - + /* If bootloader version has not been reset, disk might * not be intact. */ if (firmware_settings.bl_version || !firmware_settings.disk_clean) @@ -204,7 +204,7 @@ void initialize_eeprom(void) firmware_settings.disk_clean = false; recovery_mode = true; } - + firmware_settings.bl_version = EEPROM_SETTINGS_BL_MINVER; eeprom_settings_store(); } @@ -213,33 +213,33 @@ void try_flashboot(void) { if (!firmware_settings.initialized) return ; - + switch (firmware_settings.bootmethod) { case BOOT_DISK: return; - + case BOOT_ROM: start_flashed_romimage(); recovery_mode = true; break; - + case BOOT_RAM: start_flashed_ramimage(); recovery_mode = true; break; - + default: recovery_mode = true; return; } } -static const char *options[] = { +static const char *options[] = { "Boot from disk", "Boot RAM image", "Boot ROM image", - "Shutdown" + "Shutdown" }; #define FAILSAFE_OPTIONS 4 @@ -253,7 +253,7 @@ void failsafe_menu(void) char buf[32]; int i; extern int line; - + reset_screen(); printf("Bootloader %s", rbversion); check_battery(); @@ -270,7 +270,7 @@ void failsafe_menu(void) if (defopt < 0 || defopt >= FAILSAFE_OPTIONS) defopt = option; } - + while (current_tick - start_tick < TIMEOUT) { /* Draw the menu. */ @@ -279,27 +279,27 @@ void failsafe_menu(void) { char *def = "[DEF]"; char *arrow = "->"; - + if (i != defopt) def = ""; if (i != option) arrow = " "; - + printf("%s %s %s", arrow, options[i], def); } - - snprintf(buf, sizeof(buf), "Time left: %lds", + + snprintf(buf, sizeof(buf), "Time left: %lds", (TIMEOUT - (current_tick - start_tick)) / HZ); lcd_puts(0, 10, buf); lcd_update(); button = button_get_w_tmo(HZ); - + if (button == BUTTON_NONE || button & SYS_EVENT) continue ; start_tick = current_tick; - - /* Ignore the ON/PLAY -button because it can cause trouble + + /* Ignore the ON/PLAY -button because it can cause trouble with the RTC alarm mod. */ switch (button & ~(BUTTON_ON)) { @@ -308,7 +308,7 @@ void failsafe_menu(void) if (option > 0) option--; break ; - + case BUTTON_DOWN: case BUTTON_RC_FF: if (option < FAILSAFE_OPTIONS-1) @@ -318,7 +318,7 @@ void failsafe_menu(void) case BUTTON_SELECT: case BUTTON_RC_ON: goto execute; - + case BUTTON_REC: case BUTTON_RC_REC: if (firmware_settings.initialized) @@ -330,9 +330,9 @@ void failsafe_menu(void) break ; } } - + execute: - + lcd_puts(0, 10, "Executing command..."); lcd_update(); sleep(HZ); @@ -342,18 +342,18 @@ void failsafe_menu(void) { case BOOT_DISK: return ; - + case BOOT_RAM: start_flashed_ramimage(); printf("Image not found"); break; - + case BOOT_ROM: start_flashed_romimage(); printf("Image not found"); break; } - + shutdown(); } #endif @@ -387,7 +387,7 @@ void main(void) int data; extern int line; /* From common.c */ extern int remote_line; /* From common.c */ - + /* We want to read the buttons as early as possible, before the user releases the ON button */ @@ -416,11 +416,11 @@ void main(void) } __uda1380_reset_hi(); - + /* Start with the main backlight OFF. */ backlight_hw_init(); backlight_hw_off(); - + /* Remote backlight ON */ #ifdef HAVE_REMOTE_LCD remote_backlight_hw_on(); @@ -430,7 +430,7 @@ void main(void) kernel_init(); __uda1380_reset_lo(); - + #ifdef HAVE_ADJUSTABLE_CPU_FREQ /* Set up waitstates for the peripherals */ set_cpu_frequency(0); /* PLL off */ @@ -443,7 +443,7 @@ void main(void) #ifdef HAVE_EEPROM_SETTINGS initialize_eeprom(); #endif - + usb_init(); /* A small delay after usb_init is necessary to read the I/O port correctly (if ports are read _immediately_ after the init). */ @@ -451,25 +451,25 @@ void main(void) adc_init(); button_init(); - + /* Only check remote hold status if remote power button was actually used. */ if (rc_on_button) { lcd_remote_init(); - + /* Allow the button driver to check the buttons */ sleep(HZ/50); - + if (remote_button_hold()) hold_status = true; } - + /* Check main hold switch status too. */ if (on_button && button_hold()) { hold_status = true; } - + /* Power on the hard drive early, to speed up the loading. */ if (!hold_status # ifdef HAVE_EEPROM_SETTINGS @@ -479,7 +479,7 @@ void main(void) { ide_power_enable(true); } - + # ifdef HAVE_EEPROM_SETTINGS if (!hold_status && (usb_detect() != USB_INSERTED) && !recovery_mode) try_flashboot(); @@ -496,11 +496,11 @@ void main(void) remote display here. */ if (remote_detect()) lcd_remote_on(); - + font_init(); lcd_setfont(FONT_SYSFIXED); - + printf("Rockbox boot loader"); printf("Version %s", rbversion); @@ -524,7 +524,7 @@ void main(void) printf("Hold switch on"); shutdown(); } - + #ifdef HAVE_EEPROM_SETTINGS failsafe_menu(); #endif @@ -570,7 +570,7 @@ void main(void) line = 0; remote_line = 0; check_battery(); - + storage_spin(); /* Prevent the drive from spinning down */ sleep(HZ); @@ -642,9 +642,9 @@ unsigned short *bidi_l2v(const unsigned char *str, int orientation) static unsigned short utf16_buf[SCROLL_LINE_SIZE]; unsigned short *target; (void)orientation; - + target = utf16_buf; - + while (*str) str = utf8decode(str, target++); *target = 0; -- cgit v1.2.3