From e196759fbd5142d1197320f62b33022f3b80ef98 Mon Sep 17 00:00:00 2001 From: Björn Stenberg Date: Thu, 17 Jan 2002 16:11:26 +0000 Subject: initial checkin git-svn-id: svn://svn.rockbox.org/rockbox/trunk@2 a1c6a512-1295-4272-9138-f99709370657 --- CVSROOT/checkoutlist | 13 +++++++++++++ CVSROOT/commitinfo | 15 +++++++++++++++ CVSROOT/config | 11 +++++++++++ CVSROOT/loginfo | 26 ++++++++++++++++++++++++++ CVSROOT/modules | 26 ++++++++++++++++++++++++++ 5 files changed, 91 insertions(+) create mode 100644 CVSROOT/checkoutlist create mode 100644 CVSROOT/commitinfo create mode 100644 CVSROOT/config create mode 100644 CVSROOT/loginfo create mode 100644 CVSROOT/modules (limited to 'CVSROOT') diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist new file mode 100644 index 0000000000..b04b3501f5 --- /dev/null +++ b/CVSROOT/checkoutlist @@ -0,0 +1,13 @@ +# The "checkoutlist" file is used to support additional version controlled +# administrative files in $CVSROOT/CVSROOT, such as template files. +# +# The first entry on a line is a filename which will be checked out from +# the corresponding RCS file in the $CVSROOT/CVSROOT directory. +# The remainder of the line is an error message to use if the file cannot +# be checked out. +# +# File format: +# +# [] +# +# comment lines begin with '#' diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo new file mode 100644 index 0000000000..b19e7b7a63 --- /dev/null +++ b/CVSROOT/commitinfo @@ -0,0 +1,15 @@ +# The "commitinfo" file is used to control pre-commit checks. +# The filter on the right is invoked with the repository and a list +# of files to check. A non-zero exit of the filter program will +# cause the commit to be aborted. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being committed to, relative +# to the $CVSROOT. For the first match that is found, then the remainder +# of the line is the name of the filter to run. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/config b/CVSROOT/config new file mode 100644 index 0000000000..8069cad5df --- /dev/null +++ b/CVSROOT/config @@ -0,0 +1,11 @@ +# Set this to "no" if pserver shouldn't check system users/passwords +#SystemAuth=no + +# Set `PreservePermissions' to `yes' to save file status information +# in the repository. +#PreservePermissions=no + +# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top +# level of the new working directory when using the `cvs checkout' +# command. +#TopLevelAdmin=no diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo new file mode 100644 index 0000000000..5a59f0a544 --- /dev/null +++ b/CVSROOT/loginfo @@ -0,0 +1,26 @@ +# The "loginfo" file controls where "cvs commit" log information +# is sent. The first entry on a line is a regular expression which must match +# the directory that the change is being made to, relative to the +# $CVSROOT. If a match is found, then the remainder of the line is a filter +# program that should expect log information on its standard input. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name ALL appears as a regular expression it is always used +# in addition to the first matching regex or DEFAULT. +# +# You may specify a format string as part of the +# filter. The string is composed of a `%' followed +# by a single format character, or followed by a set of format +# characters surrounded by `{' and `}' as separators. The format +# characters are: +# +# s = file name +# V = old version number (pre-checkin) +# v = new version number (post-checkin) +# +# For example: +#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog +# or +#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog diff --git a/CVSROOT/modules b/CVSROOT/modules new file mode 100644 index 0000000000..cb9e9efc94 --- /dev/null +++ b/CVSROOT/modules @@ -0,0 +1,26 @@ +# Three different line formats are valid: +# key -a aliases... +# key [options] directory +# key [options] directory files... +# +# Where "options" are composed of: +# -i prog Run "prog" on "cvs commit" from top-level of module. +# -o prog Run "prog" on "cvs checkout" of module. +# -e prog Run "prog" on "cvs export" of module. +# -t prog Run "prog" on "cvs rtag" of module. +# -u prog Run "prog" on "cvs update" of module. +# -d dir Place module in directory "dir" instead of module name. +# -l Top-level directory only -- do not recurse. +# +# NOTE: If you change any of the "Run" options above, you'll have to +# release and re-checkout any working directories of these modules. +# +# And "directory" is a path to a directory relative to $CVSROOT. +# +# The "-a" option specifies an alias. An alias is interpreted as if +# everything on the right of the "-a" had been typed on the command line. +# +# You can encode a module within a module by using the special '&' +# character to interpose another module into the current module. This +# can be useful for creating a module that consists of many directories +# spread out over the entire source repository. -- cgit v1.2.3