From d405026ca8bc4c63d8fcd5d63cef02341182774b Mon Sep 17 00:00:00 2001 From: Cástor Muñoz Date: Thu, 12 May 2016 03:16:27 +0200 Subject: iPod Nano2G: add HAVE_SERIAL Change-Id: I46dca69c6708d3e6189f66e70badf0a594bac00b --- firmware/SOURCES | 5 ++ firmware/export/config/ipodnano2g.h | 4 +- firmware/target/arm/s5l8700/debug-s5l8700.c | 39 +++++++++ .../target/arm/s5l8700/ipodnano2g/serial-nano2g.c | 96 ++++++++++++++++++++++ 4 files changed, 143 insertions(+), 1 deletion(-) create mode 100644 firmware/target/arm/s5l8700/ipodnano2g/serial-nano2g.c diff --git a/firmware/SOURCES b/firmware/SOURCES index 098eca427f..70729bcfa3 100644 --- a/firmware/SOURCES +++ b/firmware/SOURCES @@ -1582,6 +1582,11 @@ target/arm/s5l8700/ipodnano2g/nand-nano2g.c target/arm/s5l8700/ipodnano2g/pmu-nano2g.c target/arm/s5l8700/ipodnano2g/rtc-nano2g.c target/arm/s5l8700/usb-nano2g-6g.c +#ifdef HAVE_SERIAL +target/arm/uc870x.c +target/arm/s5l8700/uart-s5l8701.c +target/arm/s5l8700/ipodnano2g/serial-nano2g.c +#endif #ifndef BOOTLOADER target/arm/s5l8700/ipodnano2g/audio-nano2g.c target/arm/s5l8700/ipodnano2g/piezo-nano2g.c diff --git a/firmware/export/config/ipodnano2g.h b/firmware/export/config/ipodnano2g.h index 5ad41a16c1..a9c7239056 100644 --- a/firmware/export/config/ipodnano2g.h +++ b/firmware/export/config/ipodnano2g.h @@ -232,7 +232,9 @@ /* Define this if you can switch on/off the accessory power supply */ #define HAVE_ACCESSORY_SUPPLY //#define IPOD_ACCESSORY_PROTOCOL -//#define HAVE_SERIAL +#ifdef LOGF_SERIAL +#define HAVE_SERIAL +#endif /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF diff --git a/firmware/target/arm/s5l8700/debug-s5l8700.c b/firmware/target/arm/s5l8700/debug-s5l8700.c index e318dbf2da..ecb15df5d0 100644 --- a/firmware/target/arm/s5l8700/debug-s5l8700.c +++ b/firmware/target/arm/s5l8700/debug-s5l8700.c @@ -32,6 +32,10 @@ #include "pmu-target.h" #include "nand-target.h" #endif +#ifdef HAVE_SERIAL +#include "uart-target.h" +#include "uc870x.h" +#endif #define DEBUG_CANCEL BUTTON_MENU @@ -49,7 +53,11 @@ bool dbg_hw_info(void) int i; #ifdef IPOD_NANO2G unsigned int state = 0; +#ifdef UC870X_DEBUG + const unsigned int max_states=3; +#else const unsigned int max_states=2; +#endif int nand_bank_count; struct storage_info info; const struct nand_device_info_type *nand_devicetype[4]; @@ -123,6 +131,37 @@ bool dbg_hw_info(void) _DEBUG_PRINTF("backlight: %s", pmu_read(0x29) ? "on" : "off"); _DEBUG_PRINTF("brightness value: %d", pmu_read(0x28)); } +#ifdef UC870X_DEBUG + else if(state==2) + { + extern struct uartc_port ser_port; + int tx_stat, rx_stat, tx_speed, rx_speed; + char line_cfg[4]; + int abr_stat; + uint32_t abr_cnt; + char *abrstatus[] = {"Idle", "Launched", "Counting", "Abnormal"}; + + uartc_port_get_line_info(&ser_port, + &tx_stat, &rx_stat, &tx_speed, &rx_speed, line_cfg); + abr_stat = uartc_port_get_abr_info(&ser_port, &abr_cnt); + + _DEBUG_PRINTF("UART %d:", ser_port.id); + line++; + _DEBUG_PRINTF("line: %s", line_cfg); + _DEBUG_PRINTF("Tx: %s, speed: %d", tx_stat ? "On":"Off", tx_speed); + _DEBUG_PRINTF("Rx: %s, speed: %d", rx_stat ? "On":"Off", rx_speed); + _DEBUG_PRINTF("ABR: %s, cnt: %u", abrstatus[abr_stat], abr_cnt); + line++; + _DEBUG_PRINTF("n_tx_bytes: %u", ser_port.n_tx_bytes); + _DEBUG_PRINTF("n_rx_bytes: %u", ser_port.n_rx_bytes); + _DEBUG_PRINTF("n_ovr_err: %u", ser_port.n_ovr_err); + _DEBUG_PRINTF("n_parity_err: %u", ser_port.n_parity_err); + _DEBUG_PRINTF("n_frame_err: %u", ser_port.n_frame_err); + _DEBUG_PRINTF("n_break_detect: %u", ser_port.n_break_detect); + _DEBUG_PRINTF("ABR n_abnormal: %u %u", + ser_port.n_abnormal0, ser_port.n_abnormal1); + } +#endif else { state=0; diff --git a/firmware/target/arm/s5l8700/ipodnano2g/serial-nano2g.c b/firmware/target/arm/s5l8700/ipodnano2g/serial-nano2g.c new file mode 100644 index 0000000000..487984fbe3 --- /dev/null +++ b/firmware/target/arm/s5l8700/ipodnano2g/serial-nano2g.c @@ -0,0 +1,96 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2014 by Cástor Muñoz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include +#include + +#include "config.h" +#include "cpu.h" +#include "system.h" +#include "serial.h" + +#include "s5l8700.h" +#include "uc870x.h" + +/* Define LOGF_ENABLE to enable logf output in this file */ +#define LOGF_ENABLE +#include "logf.h" + + +/* shall include serial HW configuracion for specific target */ +#define NANO2G_UART_CLK_HZ 24000000 /* external OSC0 ??? */ + +/* This values below are valid with a UCLK of 24MHz */ +#define BRDATA_9600 (155) /* 9615 */ +#define BRDATA_19200 (77) /* 19231 */ +#define BRDATA_28800 (51) /* 28846 */ +#define BRDATA_38400 (38) /* 38462 */ +#define BRDATA_57600 (25) /* 57692 */ +#define BRDATA_115200 (12) /* 115385 */ + + +extern const struct uartc s5l8701_uartc0; + +struct uartc_port ser_port IDATA_ATTR = +{ + /* location */ + .uartc = &s5l8701_uartc0, + .id = 0, + + /* configuration */ + .rx_trg = UFCON_RX_FIFO_TRG_4, + .tx_trg = UFCON_TX_FIFO_TRG_EMPTY, + .clksel = UCON_CLKSEL_ECLK, + .clkhz = NANO2G_UART_CLK_HZ, + + /* interrupt callbacks */ + .rx_cb = NULL, + .tx_cb = NULL, /* polling */ +}; + +/* + * serial driver API + */ +void serial_setup(void) +{ + uartc_port_open(&ser_port); + + /* set a default configuration, Tx and Rx modes are + disabled when the port is initialized */ + uartc_port_config(&ser_port, ULCON_DATA_BITS_8, + ULCON_PARITY_NONE, ULCON_STOP_BITS_1); + uartc_port_set_bitrate_raw(&ser_port, BRDATA_115200); + + /* enable Tx interrupt request or POLLING mode */ + uartc_port_set_tx_mode(&ser_port, UCON_MODE_INTREQ); + + logf("[%lu] "MODEL_NAME" port %d ready!", + (uint32_t)USEC_TIMER, ser_port.id); +} + +int tx_rdy(void) +{ + return uartc_port_tx_ready(&ser_port) ? 1 : 0; +} + +void tx_writec(unsigned char c) +{ + uartc_port_tx_byte(&ser_port, c); +} -- cgit v1.2.3