From b812465bfff2111e149a44d7041c1d62d7e1519c Mon Sep 17 00:00:00 2001
From: Rafaël Carré <rafael.carre@gmail.com>
Date: Fri, 18 Jun 2010 01:47:39 +0000
Subject: as3525: bootloader USB mode

not working yet : an empty drive is detected
won't link on fuzev1: drivers allocated in usb_storage.c are too large

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26905 a1c6a512-1295-4272-9138-f99709370657
---
 bootloader/sansa_as3525.c                   | 28 ++++++++++++++++++++++++++++
 firmware/export/config.h                    |  3 ++-
 firmware/target/arm/as3525/usb-drv-as3525.c |  6 ++++++
 firmware/usb.c                              |  3 ++-
 4 files changed, 38 insertions(+), 2 deletions(-)

diff --git a/bootloader/sansa_as3525.c b/bootloader/sansa_as3525.c
index 9248921eed..e63bb2c749 100644
--- a/bootloader/sansa_as3525.c
+++ b/bootloader/sansa_as3525.c
@@ -27,6 +27,11 @@
 #include <inttypes.h>
 #include "config.h"
 #include "lcd.h"
+#ifdef USE_ROCKBOX_USB
+#include "usb.h"
+#include "usb_core.h"
+#include "sysfont.h"
+#endif /* USE_ROCKBOX_USB */
 #include "backlight.h"
 #include "button-target.h"
 #include "common.h"
@@ -82,6 +87,29 @@ void main(void)
     if(ret < 0)
         error(EATA,ret);
 
+#ifdef USE_ROCKBOX_USB
+    usb_init();
+    if(usb_detect() == USB_INSERTED)
+    {
+        const char msg[] = "Bootloader USB mode";
+        reset_screen();
+        lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * sizeof(msg))) / 2,
+                    (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
+        lcd_update();
+
+        usb_core_enable_driver(USB_DRIVER_MASS_STORAGE, true);
+        usb_enable(true);
+
+        while(usb_detect() == USB_INSERTED)
+            sleep(HZ);
+
+        usb_enable(false);
+
+        reset_screen();
+        lcd_update();
+    }
+#endif /* USE_ROCKBOX_USB */
+
     if(!disk_init(IF_MV(0)))
         panicf("disk_init failed!");
 
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 5be2c99dcb..22178e4bd4 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -916,7 +916,8 @@ Lyre prototype 1 */
 #if  (defined(TOSHIBA_GIGABEAT_S) || \
      (defined(CREATIVE_ZVx) || \
      defined(CPU_TCC77X) || defined(CPU_TCC780X))) || \
-     (CONFIG_USBOTG == USBOTG_JZ4740) || defined(IPOD_NANO2G)
+     (CONFIG_USBOTG == USBOTG_JZ4740) || defined(IPOD_NANO2G) || \
+     CONFIG_USBOTG == USBOTG_AS3525
 #define USB_ENABLE_STORAGE
 #endif
 
diff --git a/firmware/target/arm/as3525/usb-drv-as3525.c b/firmware/target/arm/as3525/usb-drv-as3525.c
index 45dadebc85..fe3b38fdb5 100644
--- a/firmware/target/arm/as3525/usb-drv-as3525.c
+++ b/firmware/target/arm/as3525/usb-drv-as3525.c
@@ -684,8 +684,10 @@ int usb_drv_recv(int ep, void *ptr, int len)
     endpoints[ep][1].len = len;
     endpoints[ep][1].rc = -1;
 
+#ifndef BOOTLOADER
     /* remove data buffer from cache */
     invalidate_dcache();
+#endif
     /* DMA setup */
     uc_desc->status    = USB_DMA_DESC_BS_HST_RDY |
                          USB_DMA_DESC_LAST |
@@ -734,8 +736,10 @@ void ep_send(int ep, void *ptr, int len)
     endpoints[ep][0].len = len;
     endpoints[ep][0].rc = -1;
 
+#ifndef BOOTLOADER
     /* Make sure data is committed to memory */
     clean_dcache();
+#endif
 
     logf("xx%s\n", make_hex(ptr, len));
 
@@ -843,10 +847,12 @@ static void handle_out_ep(int ep)
              logf("EP%d OUT token, st:%08x len:%d frm:%x data=%s epstate=%d\n", ep,
                  dma_mst, dma_len, dma_frm, make_hex(uc_desc->data_ptr, dma_len),
                  endpoints[ep][1].state);
+#ifndef BOOTLOADER
              /*
               * If parts of the just dmaed range are in cache, dump them now.
               */
              dump_dcache_range(uc_desc->data_ptr, dma_len);
+#endif
         } else{
              logf("EP%d OUT token, st:%08x frm:%x (no data)\n", ep,
                  dma_mst, dma_frm);
diff --git a/firmware/usb.c b/firmware/usb.c
index e27a3c3dc2..baf6af7d69 100644
--- a/firmware/usb.c
+++ b/firmware/usb.c
@@ -51,7 +51,8 @@
      (defined(HAVE_USBSTACK) && (defined(OLYMPUS_MROBE_500))) || \
      (defined(HAVE_USBSTACK) && (defined(IPOD_NANO2G))) || \
      defined(CPU_TCC77X) || defined(CPU_TCC780X) || \
-     (CONFIG_USBOTG == USBOTG_JZ4740)
+     (CONFIG_USBOTG == USBOTG_JZ4740) || \
+     (defined(USE_ROCKBOX_USB) && CONFIG_USBOTG == USBOTG_AS3525)
 #define USB_FULL_INIT
 #endif
 
-- 
cgit v1.2.3